SHARP DTE337 Technical Report

DUPLICATOR : SD-4085

Date

Jan. 9, 1998

No. : DTE-337

MEASURE TO STABILIZE THE PAPER FLOW PERFORMANCE IN THE RDH UNIT.

1.Model Name: SD-4085

2.General: There have been changes carried out in the parts listed below. This action has been

carried out as a measure to stabilize the paper flow performance of the original documents in the RDH units.

3.Description: <1> A change has been carried out in the shape of the SB tension plate.

(Please refer to P/G NO. [50]-3).

[Old]

LPLTM5173FCZZ (Qty: 3)

[New]

LPLTM5338FCZZ (Qty: 1)

In accordance with the change described above, the number of fixing screws (XBPSD30P06K00) has been changed from 6 to 3.

SHARP CORPORATION Reprography Division

1/2

Green

<2> A change has been carried out in the thickness of the SB tension plate.

(Please refer to P/G NO. [41]-17).

The thickness of the plate has been changed from t 0.5 to t 1.0.

[Old] [New]

LPLTM5173FCZZ → LPLTM5339FCZZ

4.Action: From 1996 mid-October production.

Ref.

Model

No.

SD-4085 All

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

50 -3

50 -B1

41 -17 LPLTM5173FCZZ LPLTM5339FCZZ AD Pusher plate 3

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

LPLTM5173FCZZ

(Q’ty: 3)

XBPSD30P06K00

LPLTM5338FCZZ

(Q’ty: 1)

Q’ty Change

6 → 3

Price

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

SB2 tension plate

Screw (3 × 6K) 6

Effec-

tive

time

Mid-

’96/10

Inter-

change-

ability

Note

2/2