SHARP DTE334 Technical Report

DUPLICATOR : SD-2075/4085

Date

Jan. 12, 1998

1.CHANGE CARRIED OUT IN PARTS OF THE TRANSPORT SCREW.

2.REQUEST FOR CORRECTION AND SUPPLEMENTAL EXPLANATION IN TECHNICAL REPORTS NO. DTE-236.

1. Change carried out in parts of the transport screw.

1.Model Name: SD-2075/3075/3076/4085

2.General: The transport screw A used in the cleaner unit and the waste toner recovery section has

been discontinued, and changed to the C16 toner screw HI/E. This action has been carried out as a measure to establish interchangeability of parts with other models.

No. : DTE-334

[Old] [New]

NSRW-0009FCZZ → NSRW-0026FCZZ (Transport Screw) (C16 Toner Screw HI) NSRW-0010FCZZ → NSRW-0026FCZ1 (Transport Screw A) (C16 Toner Screw E)

3.Action: From the 1st lot of 1997 October production.

2. Request for correction and supplemental explanation in Technical Reports No. DTE-236.

1.Model Name: SD-4085

2.General: There is an error in the supplemental explanation and printing of "Regarding the CCFT

service part", in Technical Report No. DTE-236. Please note the following corrections.

<1> Supplemental explanation concerning the CCFT unit.

The CCFT unit refers to the fluorescent light tube, harness and connector used in the back light of the LCD unit being established as an assembly, and as such being given a unit code.

<2> Request for the correction of the printing error.

In the second item of page 2/3 of the Technical Report, the term ’’BL holder" should be ‘‘CL holder’’. A request is hereby made to make the correction to ‘‘BL holder’’.

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

No.

Model

name

Version P/G No.

Current parts New parts

Parts code Parts code

Price

rank

Parts name

Effec-

tive

time

Inter-

change-

ability

Note

SD-2075

SD-3075 SD-3076

SD-4085

SD-2075 16 -54

SD-3075 SD-3076

SD-4085

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

16 -55

34 -10

15 -10

37 -10

All

39 -11

15 -9

37 -11

NSRW-0009FCZZ NSRW-0026FCZZ AC C16 toner screw HI

1st lot ’97/10

NSRW-0010FCZZ NSRW-0026FCZ1 AD C16 toner screw E

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Q’ty: 31

Q’ty: 39

Q’ty: 2

Q’ty: 1

2/2