SHARP DTE333 Technical Report
DUPLICATOR : SD-2260
Date
:
Dec. 5, 1997
1. REGARDING PREVENTING SUCTION BELT FROM STICKING TO SUCTION
PAPER GUIDE.
2. REGARDING CHANGE TO CENTER TRAY UNIT’S PAPER DELIVERY BOARD
SPACER.
3. REGARDING DISCONTINUED PRODUCTION OF TRANSPORT UNIT’S INTERNAL
PARTS.
No. : DTE-333
1. Regarding preventing suction belt from sticking to suction paper guide.
1.Model Name: SD-2260
2.General: Malfunctioning caused by a deteriorating suction belt sticking to the suction paper guide
may result in paper jams and other problems. To prevent this from occurring, we have
changed the materials used in the belt. Because of this, production of the sheet
underneath the suction belt has been discontinued.
3.Action: From the first unit of October, 1997 production on.
2. Regarding change to center tray unit’s paper delivery board spacer.
1.Model Name: SD-2260
2.General: To increase productivity, we have changed the processing method of the center tray
unit’s paper delivery board spacer from the cutting type to the rapper type.
As a result, the part codes have also been changed.
Old New
PSPAZ0625FCZZ → PSPAZ1407FCZZ
3.Action: From the first unit of October, 1997 production on.
SHARP CORPORATION Reprography Division
1/2
Green
C
3. Regarding discontinued production of transport unit’s internal parts.
1.Model Name: SD-2260
2.General: To increase productivity, we are no longer producing the following transport unit parts.
For part names and part codes refer to the part list.
16 Transport section
3.Action: From the first unit of October, 1997 production on.
Ref.
Model
No.
1
2 31 -64 PSPAZ0625FCZZ PSPAZ1407FCZZ AC Delivery plate spacer Z 1 Q’ty: 2
SD-2260 All
3
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
29 -16
29 PSHEZ4472FCZZ Discontinued ----
16 -1 MSPRT2040FCZZ
16 -2 CROLP0945FC32
16 -6 XBPSD30P06K00
16 -7
16 -83
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
NBLTH0223FCZZ NBLTH0311FCZZ AP Suction belt Z
Q’ty Change
8 → 6
Q’ty Change
4 → 3
Q’ty Change
3 → 2
LPLTM5152FCZZ Discontinued
QSW-Z0457FCZZ
Q’ty Change
2 → 1
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Price
rank
AB Transport spring A
AS Transport roller unit
AA Screw (3 × 6K)
----
Parts name
Sheet underneath the
suction belt
Switch fixing plate F
DGD1 switch
Effec-
tive
time
1st lot
’97/10
Inter-
change-
ability
3 Q’ty: 2
6
6
Note
2/2
Loading...