SHARP DTE332 Technical Report

DUPLICATOR : SD-2060

Date

Dec. 5, 1997

No. : DTE-332

REGARDING PREVENTING SUCTION BELT FROM STICKING TO SUCTION PAPER GUIDE.

1.Model Name: SD-2060/3062

2.General: Malfunctioning caused by a deteriorating suction belt sticking to the suction paper guide

may result in paper jams and other problems. To prevent this from occurring, we have changed the materials used in the belt. Because of this, production of the sheet underneath the suction belt has been discontinued.

3.Action: From the first unit of November, 1997 production on.

Ref.

Model

No.

SD-2060 SD-3062

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

30 -16

All

30 PSHEZ4472FCZZ Discontinued ----

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

NBLTH0223FCZZ NBLTH0311FCZZ AP Suction belt Z

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

rank

Sheet underneath the suction belt

Parts name

Effec-

tive

time

1st lot ’97/11

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green