SHARP DTE321 Technical Report

DUPLICATOR : SD-2060/2260

Date

:

Sep. 22, 1997

1. A CHANGE TO THE TRAY UNIT’S SLIDE GUIDE.

2. A CHANGE TO THE TRANSPORT DRIVE UNIT’S TRANSPORT DRIVE PLATE D.

3. A CHANGE TO THE MATERIAL USED IN THE AIR PAPER SUPPLY UNIT’S PAPER
SUPPLY BELT.

4. PREVENTING THE FUSING DRIVE BELT FROM COMING OFF.

No. : DTE-321

1. A Change to the tray unit’s slide guide.

1.Model Name: SD-2060/3062/2260

2.General: In order to improve productivity, we have discontinued the anti-vibration collars and

collar attachment plates used in the first, second, and third paper supply tray units and
replaced them with solid resin slide guides.

Old New

Anti-vibration collar

Collar attachment plate

* PCLR-0308FCZZ

LPLTM4341FCZZ

3.Action: From the first lot of August, 1997 production on.

Slide guide
(Solid resin)

PGIDM1768FCZZ

2. A change to the transport drive unit’s transport drive plate D.

1.Model Name: SD-2060/3062/2260

2.General: In order to standardize the parts used in this model and other models, we have added

two screw openings to the transport drive unit’s transport drive plate D. At the same time,
we have added two screws to the SD-2260 only.

SHARP CORPORATION Reprography Division

1/4

Green

C

Added 2 screw openings
∗ Added two screws to SD-2260 only

3.Action: From the first lot of September, 1997 production on.

3. A change to the material used in the air paper supply unit’s paper supply belt.

1.Model Name: SD-2060/3062/2260

2.General: In order to avoid violating another company’s patent, we have changed the material

used for the paper supply belts in the first, second, and third air paper supply units.

3.Action: From the first lot of August, 1997 production on.

2/4