SHARP DTE317 Technical Report

DUPLICATOR : SD-2260

Date

Aug. 22, 1997

No. : DTE-317

COMMON USE FOR LEFT EXTERIOR UPPERS (PRODUCTION IMPROVEMENT)

1.Model Name: SD-2060/2260

2.General: Left exterior uppers from new machines can also be used in the machines listed above,

which improves production. Please refer to the figure below for existing left exterior uppers and their changes.

Louvers added

3.Action: From mid-September, 1997 (running change)

Ref.

Model

No.

SD-2060 SD-2260

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

1 -2

All

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

GCAB-0778FCZZ GCAB-0778FCZ1 BF Left exterior upper

Effec-

Price

rank

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

tive

time

Mid-

’97/9

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green