![](/html/f6/f6f1/f6f1833959826151971197a3fc73a94bfa0bc831340658bc3650444253c154f7/bg1.png)
DUPLICATOR : SD-4085
1.MEASURE TO PREVENT THE STABLE CARTRIDGE (BOX) FROM BEING
THROWN AWAY DURING STAPLE REPLACEMENT OPERATIONS IN THE
STAPLER.
2.MEASURE TO HELP ALLEVIATE PROBLEMS OF JAMS OF A4 SIZED COPY
PAPER IN THE RDH UNIT.
No. : DTE-316
1. Measure to prevent the stable cartridge (BOX) from being thrown away during staple
replacement operations in the stapler.
1.Model Name: SD-4085 (SD-F202)
2.General: When carrying out staple replacement operations, the staples should merely be fed into
the machine, but mistakes are often made whereby the staple cartridge (box) is thrown
away and therefore the staples cannot be fed into the machine. As a measure to alleviate
this problem, a label to prevent the staple cartridge from being thrown away has been
added.
Staple feeding label
English
3.Action: From the 1st lot of 1997 August production.
4 Languages
SHARP CORPORATION Reprography Division
1/2
Green
C
![](/html/f6/f6f1/f6f1833959826151971197a3fc73a94bfa0bc831340658bc3650444253c154f7/bg2.png)
2. Measure to help alleviate problems of jams of A4 sized copy paper in the RDH unit.
1.Model Name: SD-4085
2.General: The addition of an SB1 stopper sheet was reported in item 1 of T/R DTE-304.
There was a problem, however, of jams occurring during copy operations of original
documents which were A4 size. As a measure to alleviate this problem, a change in the
shape of the SB1 sheet has been carried out.
Double sided tape attachment
measurement
Hole
The measurements marked with a ‘‘ 1 ’’ are 2 mm greater
Double sided tape
attachment measurement
than the measurements in the previous change.
3.Action: From the 1st lot of 1997 May production.
Ref.
Model
No.
name
SD-4085
1
(SD-F202)
2 SD-4085 All 45 PSHEP4509FCZZ PSHEP4509FCZ1 AF SB1 stopper sheet
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
English
4 languages TLABH4174FCZZ AG
58 ----
Current parts New parts
Parts code Parts code
TLABH4168FCZZ AE
Hole
measurement
Hole
measurement
Effec-
Price
rank
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Parts name
Staple feeding label
tive
time
1st lot
’97/8
1st lot
’97/5
Inter-
change-
ability
6
3
Note
2/2