
DUPLICATOR : SD-2260
1. CHANGES CARRIED OUT IN THE FUSING UNIT AS A MEASURE TO IMPROVE
PRODUCTIVITY.
2. CHANGES CARRIED OUT IN THE FINISHING UNIT AS A MEASURE TO IMPROVE
PRODUCTIVITY.
3. USE OF RECYCLED MATERIALS IN THE SUCTION DUCT.
No. : DTE-314
1. Changes carried out in the fusing unit as a measure to improve productivity.
1.Model Name: SD-2060/2260/3062
2.General: A change has been carried out in the method of finishing the surface of some of the parts
used in the fusing unit. This change has been carried out as a measure to improve
productivity. Please refer to the parts list for details concerning the parts in which
changes were carried out, and their part codes.
Note: Because the taps for the screw holes for the fixing screws in the reversion paper
guide A after the change described above was carried out. The screws have been
changed to screws which can have node operations carried out without tapping.
3.Action: From the 1st lot of 1997 July production.
2. Changes carried out in the finishing unit as a measure to improve productivity.
1.Model Name: SD-3062
2.General: A change has been carried out in the materials used for some of the parts used in the
finisher unit. These changes have been carried out as a measure to improve
productivity. Please refer to the parts list for details concerning the parts in which
changes were carried out, and their part codes.
3.Action: From the 1st lot of 1997 July production.
3. Use of recycled materials in the suction duct.
1.Model Name: SD-2060/2260/3062
2.General: A change has been carried out in the material used for the suction duct A and B used in
the suction fan section. The material has been changed to a recycled material.
3.Action: From the 1st lot of 1997 August production.
SHARP CORPORATION Reprography Division
1/3
Green
C

Ref.
Model
name
Version P/G No.
No.
SD-2060
SD-3062
SD-2260 13 -59
SD-2060
SD-3062
SD-2260
12 -59
12 -24
13 -24
Current parts New parts
Parts code Parts code
PGIDH1420FCZZ PGIDH1420FCZ1 AH Reversing paper guide A
LX-BZ0527FCZZ LX-BZ0689FCZZ AA Screw (4 × 8) ∗
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
5
Note
SD-2060
SD-3062
SD-2260 13 -58
SD-2060
SD-3062
1
SD-2260 13 -77
SD-2060
SD-3062
SD-2260
SD-2060
SD-3062
SD-2260 13 -105 AP
SD-2060
SD-3062
SD-2260 13 -26
SD-2260 13 -157 LPLTM5227FCZZ LPLTM5227FCZ1 AF Upper pawl spring fixing plate
12 -58
12 -77
All
12 -61
13 -61
12 -105
12 -26
PGIDH1421FCZ1 PGIDH1421FCZ2 AQ Reversing paper guide B
PGIDH1418FCZ2 PGIDH1418FCZ3 AS Paper guide FB
PGIDH1419FCZZ PGIDH1419FCZ1 AP Paper guide FC
LPLTM4289FCZZ LPLTM4289FCZ1
LPLTM4399FCZZ LPLTM4399FCZ1 AL Upper CL roller fixing plate
AQ
Thermistor fixing plate
∗ The change has been carried out in only two (2) of the reversion paper guide A units.
1st lot
’97/7
1
2/3

Ref.
No.
Model
name
Version P/G No.
50 -9 LFRM-0776FCZ2 LFRM-0776FCZ4 AU FIN frame F
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
2 SD-3062
50 -11
50 -96 LFRM-0777FCZ2 LFRM-0777FCZ3 AY FIN frame R
52 -45 CSOU-0113FC01 CSOU-0113FC03 AZ Staple tray
50 -51
50 -44 PGIDH1510FCZZ PGIDH1510FCZ1 Upper FIN paper guide B
50 -27 PGIDH1511FCZZ PGIDH1511FCZ1 Lower FIN paper guide A
50 -117 PGIDH-1509FCZZ PGIDH1509FCZ1 Upper FIN paper guide A
50 -62 PGIDH1512FCZZ PGIDH1512FCZ1 AL Lower FIN paper guide B
51 -41
All
51 -38 LFRM-0786FCZZ LFRM-0786FCZ1
51 -36 LFRM-0787FCZZ LFRM-0787FCZ1 Elevator frame C
51 -32
51 -37 CFRM-0782FC01 CFRM-0782FC02
50 -61 MLEVF0613FCZZ MLEVF0613FCZ1 FU lock lever
48 -19 XCTSD40P08000
48 -20 MSPRT2127FCZZ Staple spring
LFRM-0793FCZ3 LFRM-0793FCZ4 AS FIN frame FB
PGIDH1432FCZZ PGIDH1432FCZ2
LFRM-0779FCZ1 LFRM-0779FCZ2 AX Elevator frame
CFRM-0781FC02 CFRM-0781FC03 Roller frame F
Discontinued ----
Upper sub paper guide
AN
Elevator frame B
AQ
Roller frame R
AP
Screw
1
1st lot
’97/7
6
SD-2060
SD-3062
SD-2260
3
SD-2060
SD-3062
SD-2260 36 -2
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
35 -1
PDUC-0075FCZ1 PDUC-0075FCZ2 AT Suction duct A
36 -1
35 -2
PDUC-0076FCZ2 PDUC-0076FCZ3 AN Suction duct B
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
1st lot
’97/8
1
3/3