SHARP DTE311 Technical Report

DUPLICATOR : SD-2076

Date

Jul. 3, 1997

No. : DTE-311

CHANGE IN PARTS CARRIED OUT IN ACCORDANCE WITH A HALT IN PRODUCTION.

1.Model Name: SD-2075/2076/3076

2.General: A halt in the production of the temperature fuse which was used in the fusing unit

occurred. In accordance with this halt in production, a change was carried out and a replacement part is now being used. Before the change was carried out, the temperature fuse was the same for both machines bound for the Japanese domestic market, and for machines bound for overseas markets. After the change was carried out, however, the temperature fuse is different for machines bound for the Japanese domestic market and for machines bound for overseas markets.

3.Action: Only action for service parts.

Ref.

Model

No.

SD-2075 SD-2076 SD-3076 CFS-T0068FC57

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

All 25 -63 CFS-T0068FC52

Current parts New parts

Parts code Parts code

CFS-T0068FC61

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

rank

Parts name

AM Temperature fuse ---- 1

Effec-

tive

time

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green