SHARP DTE306 Technical Report

DUPLICATOR : SD-3062

Date

:

Jun. 27, 1997

[Service Information]

No. : DTE-306

REPORT OF CHANGES CARRIED OUT IN THE PARTS OF THE
PAPER DELIVERY LOCK OF THE UDH.

1.Model Name: SD-3062

2.General: The part codes for the paper delivery locks listed as 60 -14 and 68 -9 in the parts guide

of the model listed above are the same, even though the shapes of the two parts are
different. The reason for this apparent discrepancy is that the two paper delivery locks
are actually one set of male-female parts, and are therefore listed as a set under the
same part code. When an order for the paper delivery lock (OEUSTP0304D//) is placed,
the set of male and female paper delivery locks will be delivered.

3.Description: The paper delivery locks listed in the parts guide as 60 -14 and 68 -9 are a set of

male-female shaped parts, and therefore the shapes are different, as shown in the figure
below. Even though the shapes are different, however, they both have the same part
code (OEUSTP0304D//) because they comprise a single set (male-female set).

60 -14: Paper delivery lock (Female)

68 -9: Paper delivery lock (Male)

SHARP CORPORATION Reprography Division

Green

C