SHARP DTE169 Technical Report
Date: Jun. 27, 1994
COPIER : SF-2060
1. CHANGES TO WIRE HOLDER INSIDE FUSING DRIVE UNIT
(THIS IS DONE TO IMPROVE PRODUCTIVITY)
2. PREVENTION OF IRREGULAR NOISE FROM MULTI DRIVE UNIT AND
MULTI PAPER FEEDING UNIT
3. PREVENTION OF BREAKAGE OF LOCK HANDLE ATTACHMENT SCREW
4. PREVENTION OF CRACK IN FRONT TC HOLDER
No. : DTE-169
1. Changes to wire holder inside fusing drive unit (This is done to improve productivity)
1.Model name : SD-2060, 3062
2.General: We change wire holder inside fusing drive unit to larger one to improve efficiency in
harness operation.
Model number WS-INS WS-2WS
4.Action: From the first unit of December 1993 production
2. Prevention of irregular noise from multi drive unit and multi paper feeding unit
1.Model name: SD-2060, 3062
2.General: Irregular noise from multi drive unit and multi paper feeding unit occurred. We apply
white grease ????? X5-6020 (UKOG-0158FCZZ : Price rank FQ) to places described in
following illustrations in order to prevent noise.
3.Description:
(Multi drive unit)
(Multi paper feeding unit)
Apply white grease
1g
0.5g
SHARP CORPORATION Reprography Division
1/2
Green
C
4.Action: From mid-April 1994 production
3. Prevention of breakage of lock handle attachment screw
1.Model name: SD-2060, 3062
2.General: Attachment screw of lock handle operating suction was changed in length and materials
to stainless steel to prevent breakage.
3.Action: From the first unit of April 1994 production.
4. Prevention of crack in front TC holder
1.Model name: SD-2060, 3062
2.General: To prevent crack of front copy guide attachment screw to front TC holder inside TC/AC
unit, we change the screws.
3.Description: (Current) (New)
M4x8 P tight M4x8 B tight
4.Action: From mid-April 1994 production
Ref.
Model
No.
1
SD-2060
3
SD-3062
4
<Interchange>
1. Interchang ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
speci fied ones fo r m ain taining t he s a fe ty and pe r fo r ma nce o f th e s et .
name
Version P/G No.
23 -27 LHLDW2047SCZZ LHLDW2106SCZZ AB Wire holder
All
30 -51
41 -11
!
Current parts New parts
Parts code Parts code
XBPSD40P20KS0
(Q’ty: 2)
XEBSD40P08000
(Q’ty: 2)
2/2
Inclined angle of screw thread is more acute.
Effec-
tive
time
1st lot
’93/12
1st lot
’94/4
Mid-
’94/4
XBPUW40P25KS0
(Q’ty: 2)
XJBSD40P08000
(Q’ty: 2)
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Price
rank
AB Screw
AA Screw
Parts name
Inter-
change-
ability
3
3
3
Note
Loading...