SHARP DTE166 Technical Report

Date: Jun. 21, 1994

DUPLICATOR : SD-3062

No. : DTE-166

CHANGES TO FIN P/G GUIDE AT TACHMENT SCREW

(TO IMPRO VE MA R G I N S)

1.Model name: SD-3062

2.General: The margin between the head of FIN P/G guide attachment screw and F belt tension

shaft was only 1.0 mm. We change these screws to flat head screws and extend margins 2.0 mm.

3.Description: (Current) (New)

F belt tension shaft

4.Action:

FIN P/G FA

From the first unit of May 1994 production.

Ref.

Model

No.

1 SD-3062 All

1. Interc ha ng ea bl e. 4. Not int erc h an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

speci fied ones fo r mai n ta in i ng t he s a fe ty an d pe rf o rma nc e o f th e s et .

name

Version P/G No.

50 -134

M3-6 pan-head screw

Current parts New parts

Parts code Parts code

XHPSD30P06000

(Q’ty: 3)

LX-BZ1028ACZZ

(Q’ty: 3)

Price

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others.

Parts name

rank

AA Screw

M3-6 flat head screw

Effec-

Inter-

tive

change-

time

ability

1st lot

’94/5

Note

SHARP CORPORATION Reprography Division

Green