SHARP DTE163 Technical Report

Date: Jun. 16, 1994

DUPLICATOR : SD-2060

1. PREVENTION OF HITCH UNLOCKING WIRE INSIDE OF 1000 TRAY

2. PREVENTION OF BREAKAGE AND FADING NUMBERS OR SYMBOLS AWAY OF TEN-KEY
PAD IN OPERATION SECTION

3. PREVENTION OF BREAKAGE OF EXPOSURE DRAM PROTECTIVE SHEET (BLACK PAPER)

4. CHAN GES TO EFFECTIV E TI ME IN TECHNICAL REPORT

No. : DTE-163

1. Prevention of hitch unlocking wire inside of 1000 tray

1.Model name: SD-2060, 3062

2.General: After changes to unlocking wire inside of 1000 tray to harness had been carried out, we

found that unlocking wire hitches to 1000 tray protection cover. To prevent it, we change
the form of 1000 tray protection cover.

3.Description:

Cut the shaded area

4.Action: From the first unit of February 1994 production.

SHARP CORPORATION Reprography Division

1/3

Green

C

2. Prevention of breakage and fading numbers or symbols away of ten-key pad in
operation section

1.Model name: SD-2060, 3062

2.General: Ten-key pad breakage sometimes occurred and also numbers or symbols of keys

frequently faded away. We try to deal with them.

3.Description: • Breakage of ten-key pad : Add Ribs

• Fading away of numbers and symbols : Change the way of printing

4.Action: From the first unit of April 1994 production.

3. Prevention of breakage of exposure dram protective sheet (black paper)

1.Model name: SD-2060, 3062

2.General: We found that scraps of paper remained around blade caused by breakage of exposure

dram protective sheet (black paper). In order to prevent it we carry out some changes
to exposure dram as follows.

3.Description: • Change the rolling direction (Reverse the rolling direction)

• Change the size of black paper : Current 400x352 → New 344x352
(Includes for same package and for service)

4.Action: From the first exposure dram production in May

the last number of years in AD., since 4

Lot No. Nine figures O O O O O O O O O

the month which is packed, since 5

4. Changes to effective time in technical report

1.General: We order you to correct action in Technical Report No. DTE-142 and DTE-149 as
follows.

2/3