SHARP DTE156 Technical Report

Date: May. 10, 1994

DUPLICATOR: SF-2060

1. TROUBLE SHOOTING CONTACT BETWEEN THE 2000 PAPER CASSETTE
AND THE FRONT CABINET RR.

2. CHANGE IN THE PARTS CODE FOR THE SIZE GUIDE 100F COVER TO
IMPROVE PRODUCTIVITY.

3. CHANGE IN DROP SHEET TO ESTABLISH INTERCHANGEABLITY TO
IMPROVE PRODUCTIVITY.

1. Trouble shooting contact between the 2000 paper cassette and the front cabinet
RR.

1.Model name: SD-2060/3062

No. : DTE-156

2.General: Due to an error when installing the front cabinet RR (GCAB-0766FCZ1) in the machine,
the 2000 tray sometimes comes in contact with the front cabinet RR when pulling it out.
To remedy this problem, the shape of the front cabinet RR has been changed.

3.Description: The shaded section of the front cabinet RR shown below has been cut off to prevent
contact from being made with the 2000 paper cassette.

(The change in shape has been carried out but
no changes have been made in the parts code.)

6

7

( )

The shaded section has been cut off.

26

4.Action: From 1993 Mid-November production.

SHARP CORPORATION Reprography Division

1/2

Green

C

2. Change in the parts code for the size guide 100F cover to improve productivity.

1.Model name: SD-2060/3062

2.General: A finishing process had been carried out on the size guide 1000 F cover of the 1000

tray unit to finish the parting unit edge and the removal of some of the ribs. Now a metal
piece has been fitted, and the finishing process has been discontinued to improve
productivity.

3.Description: The parts number listed in the parts guide for the size guide 1000 F cover has been
changed in accordance with the fitting of the metal piece as described above.

4.Action: From 1994 Mid-February production.

3. Change in drop sheet to establish interchangeablity to improve productivity.

1.Model name: Only the 200 V series of model SD-3062

2.General: The drop sheet EX used in the 200 V series finisher unit has been changed to the drop

sheet used in the 100 V series of the models for export and the 100 V series of the
domestic models.

3.Description: The drop sheet EX the was previously used in the finisher unit of the 200 V series has
been changed to the same drop sheet used in the 100 V series. (This means that all
models will have the same drop sheet.)

4.Action: From 1994 March production.

Ref.

Model

No.

SD-2060

2

SD-3062

3 SD-3062

<Interchange>

1. Interchang ea bl e. 4. N ot i nt er ch an ge ab l e.

2. Current type can be used in place of new type.
New type cannot be used in place of current type.

3. Current type cannot be used in place of new type.
New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

speci fied ones fo r m ain taining t he s a fe ty and pe r fo r ma nce o f th e set.

name

Version P/G No.

20 -41 PCOVP1192FCZ1 PCOVP1192FCZ2 AK

All

200V

50 -131 PSHEP3653FCZZ PSHEP3618FCZZ AA drop sheet ’94/3 1

series

only

!

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of

6. Others .

Price

relate d parts in use .

Parts name

rank

size guide 1000
F cover

Effec-

tive

time

Mid-

’94/2

Inter-

change-

ability

1

Note

2/2