SHARP DTE154 Technical Report
Date: May. 20, 1994
DUPLICATOR: SD-2060
No. : DTE-154
[Service Information]
SERVICE PARTS DESIGNATION FOR FUSER
1.Model name: SD-2060, 3062
2.General: Small parts have been designated to improve service on the cleaning roller repair parts
for fuser SD-2060 and 3062.
3.Description:
Ref.
Model
No.
1
2 — NBRGC0100FCZZ AC
3 — XRESP50-06000 AA E ring (front rear)
4
5 — NBRGP0228FCZZ AG
SD-2060
6 — XRESP50-06000 AA E ring (front)
SD-3062
7 — NGERH0298FCZZ AF
8 — XXXSP30L08000 AB Allen screw
9 11 -501 CROLN0985FC31 No change BK
10 — NBRGP0228FCZZ AG
11 — XRESP50-06000 AA E ring (front rear)
12
name
Version P/G No.
11 -502 CROLN0973FC31 No change BD
11 -503 CROLN0972FC31 No change BL
All
11 -148 LPLTM4460FCZZ CFLT-0054FC01 AR
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Lower cleaning
roller UN
Lower CL roller
bearing (front
rear)
Upper cleaning
roller UN
Upper CL roller
bearing (front
rear)
Lower CL drive
gear
Oil application
roller (domestic)
Oil application
roller bearing
(front rear)
Auxiliary CL
roller mounting
plate (oil filter
incl.)
Effec-
tive
time
1st lot.
Inter-
change-
ability
1
1
1
6
Note
*See
below
* Aux i liary C L roller mountin g plate
During the in st al lation of the new lower fuser roller, an insuf ficient amount of oi l wa s supplied to
the roller surface. In very rar e cases, this causes abnormal noises to occur in the area where the
auxiliary CL roller comes into contact with the stainless steel blade. Oil filters have been mounted
to the roller m ount i ng pl ate to prevent such abnormal noises from occurring.
SHARP CORPORATION Reprography Division
Green
C
Loading...