SHARP DTE149 Technical Report

Date: Apr. 20, 1994
DUPLICATOR : SD-2060
1. PREVENTION OF LOOSENING OF THE GATE ROTARY ARM OF THE FINISHER UNIT.
2. CORRECTION OF THE PARTS CODE FOR THE WHITE SHEET OF THE ORIGINAL DOCUMENT STOPPER.
3. PREVENTION OF WEARING OF THE FIXER UNIT GEAR.
4. DISCO N TINUANCE OF THE BE A RING IN ACCO RDANCE WITH A CHAN G E IN T HE S LI DE SPRING.
No. : DTE-149
1. Prevention of loosening of the gate rotary arm of the finisher unit.
1.Model name: SD-3062
higher precision.
3.Description: The horizontal pin used in two (2) locations in the finisher has been changed.
4.Action: From 1993 December production.
2. Correction of the parts code for the white sheet of the original document stopper.
1.Model name: SD-3062
2.General: An error has been discovered in the parts code recorded in the parts guide and has
been corrected.
3.Description: The parts code of the white sheet attached to the back side of the original document stopper has been corrected. Please note that no change has been carried out on the white sheet itself.
Old (error ) New (cor re cted)
Standard white sheet PSHEP3377FCZZ White sheet 16 R PSHEP3612FCZZ
Note: The correction mentioned above has been carried out only on model SD-3062.
Currently, no changes have been carried out on PSHEP3377FCZZ used in model SD-2060.
4.Action: From 1993 November production (from the first lot production).
SHARP CORPORATION Reprography Division
1/3
Green
C
3. Prevention of wearing of the fixer unit gear.
1.Model name: SD-2060/3062
2.General: The material used in the upper CL roller gear 18T has been changed to prevent
wearing on the upper CL gear 35T-20T in the fixer unit.
3.Description: The material used in the upper CL roller gear 18T has been changed from sintered iron to PAI plastic.
4.Action: From 1994 March production.
4. Discontinuance of the bearing in accordance with a change in the slide spring.
1.Model name: SD-2060/3062
2.General: The slide spring in the middle tray unit has been changed to improve operation ability.
In accordance with this change the bearing has been changed to a washer.
3.Description: The slide spring has been changed, and the bearing has been discontinued. A washer has been added in place of the discontinued bearing.
4.Action: From 1994 April production.
2/3
Loading...
+ 1 hidden pages