SHARP DTE144 Technical Report

Date: Apr. 1, 1994
DUPLICATOR: SD-3062
No. : DTE-144
CHANGE IN PARTS TO IMPROVE PRODUCTIVITY.
1. Change in parts of PBA PWB.
1.Model name: SD-2060 / 3062
2.General: Various parts and units of the PBA PWB have been changed to improve productivity.
3.Description: The changes described above have been carried out as shown in the table below.
Note: The P/G numbers given on the top rows in the list of changed parts are for model
SD-2060, and those given on the bottom rows are for model SD-3062.
2. Change in DC power supply unit of the 100V series.
1.Model name: SD-2060
2.General: The DC power supply unit of the 100V series has been changed to improve productivity.
3.Description: The DC power supply units used in model SD-2060 and in model SD-3062 were
interchangeable, but when limited to the SD-2060 there were unnecessary parts. After these have been used up, the DC power supply units used in the SD-2060 are to be changed to ones designed specifically for that model.
DC Power supply unit of the 100V series CPWBN0999FC31 CPWBN0999FC32
(Old) (New)
The CPWBN0999FC31 DC power supply unit is interchangeable, and can be used for both model SD-3062 and model SD-2060. The CPWBN0999FC32 DC power supply unit, however, is specific ally designed for model SD-2060 (100V series).
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
No.
Model
name
Version
P/G No.
*
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
1
SD-2060 SD-3062
46 -51
VHH103AT-2/-1
77 -51
77 -158 VRS-TS2AD334F
46 -37
VCKYTV1HB223K
77 -37
46 -7
QCNCM0043FCZZ
77 -7
All
46 -77
VHIUPA2003C-1 VHIULN2003AN1 AE
77 -77
Thermistor (103AT)
Resistor (1/10W 330Ω ±1%)
Capacitor (50WV 22000pF)
Connector (NH3P)
IC (ULN2003ANL)
’94/4 TH101
’94/4 R360
’94/4 C371
’94/4
’94/4 1
46 -46
VHDWO6B////-1 Diode (WO6B) ’94/4
77 -46
46 -46
VHDWO6B////-1 VHDDSM1D1//-1 AB Diode (DSM1D1) ’94/4 1
77 -46
SD-2060
SD-3062
2 SD-2060
100V
series
8 -60
CPWBN0983FC52 CPWBN0983FC54 CL
46 -901
8 -60
CPWBN0983FC51 CPWBN0983FC53 CL
77 -901
8-1
CPWBN0999FC31 CPWBN0999FC32 CG
54 -901A
PBA control PWB
PBA control PWB
DC power supply unit
(100V series)
’94/4 1
’94/4 1
’94/4 1
<Interchange>
1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type. New type cannot be used in place of current type.
3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
speci fied ones fo r m aintaini ng t he s a fe ty an d pe rformance of the set .
!
5. Interchangeable if replaced with same types of relate d parts in use .
6. Others .
CN109
IC119, 122, 125, 127, 135
D104~106, 118~125
D103, 108, 109, 126~129
2/2
Loading...