SHARP DTE137 Technical Report

Date: Mar. 16, 1994

DUPLICATOR: SD-3062

No. : DTE-137

[Parts Change Information]

CHANGE IN PARTS TO IMPROVE PRODUCTIVITY.

1.Model name: SD-2060 / 3062

2.General: The parts described below have been changed to improve productivity.

3.Description: 1. The left and right size guide slide shafts of the 1000 sheet tray units have been

changed.

The method of installation of the left and right size guide slide shafts has been changed
in accordance with the change described above.

Stopper changed
to E-ring (E4)

Discontinued screw

Changed left size guide slide shaft

Discontinued bearing

Changed right size guide slide shaft

Stopper changed
to E-ring (E4)

E-ring (E4) changed to screw (M3 x 8)

SHARP CORPORATION Reprography Division

1/6

Green

C

4.Action: (Factory action)
From 1994 Mid-February production / March production (Please refer to the production
change items in the parts list).

2. Change in sintered bearing.

The sintered bearing used in each of the units described below have been changed.

Please refer to the figures of the units with changed sintered bearing shown below.

➀ Optical series unit.

Changed drive bearing

NBRGC0455FCZZ (Old)

↓

NBRGC0455FCZ1 (New)

➁ Transport unit.

Changed bearing B (2 locat i ons)
NBRGC0037FCZZ (Old)

↓

NBRGC0037FCZ1 (New)

Changed bearing 6 (2 locations)

NBRGC0100FCZZ (Old)

↓

NBRGC0101FCZ1 (New)

2/6