SHARP DTE135 Technical Report
Date: Feb. 22, 1994
DUPLICATOR: SD-2060
1. CHANGE IN FUSER DRIVE UNIT AND WIRE SADDLE
(TO IMPROVE OPERATIONABILITY).
2. PARTS CODE CORRECTIONS FOR THE PROCESSING
UNIT AND SCREWS.
1. Change in wire saddle in the fuser drive unit (To improve operationability.)
1.Model name: SD-2060, 3062
2.General: The size of the wire saddle in the fuser drive unit has been increased to improve
operationability in handling the harness in the fuser drive unit.
No. : DTE-135
3.Description: The wire saddle listed in the parts guide under 23 - 27 has been changed to one of the
same size as the wire saddle listed in the parts guide under 23 - 6.
Changed wire saddle
LHLDW2047SCZZ (WS-1NS) → LHLDW2106SCZZ (WS-2WS)
4.Action: (Factory action)
SD-2060: From 1993 December production.
SD-3062: From the start of mass production.
SHARP CORPORATION Reprography Division
1/2
Green
C
2. Parts code corrections for the processing unit and screws.
1.Model name: SD-2060, 3062
2.General: An error has been found in the parts guide for the screws in the process unit (P/G 10 -
2. Corrections in the parts guide should be made.
3.Description: Screws have been corrected as shown below.
Screw parts code correction.
Wrong: XBSSD30P08KS0 Q’ty: 2
Corrected: XBPSD30P08KS0 Q’ty: 2
Ref.
Model
No.
1
SD-2060
2 10 -2 XBSSD30P08KS0 XBPSD30P08KS0 AA Screws (M3 x 8) — — Q’ty: 2
<Interchange>
1. Interchang ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
s p eci fi e d on es fo r m ain ta in i ng t he s a fe ty an d pe r fo rma nc e o f th e s et .
name
3062
Version P/G No.
23 -27 LHLDW2047SCZZ LHLDW2106SCZZ AB
All
!
Current parts New parts
Parts code Parts code
5. Interchangeable if replaced with same types of
6. Others.
Price
relate d parts in use .
Parts name
rank
Wire saddle
(WS - 2WS)
Effec-
tive
time
SD-2060:
’93/12
SD-3062:
1st lot.
Inter-
change-
ability
1 *
Note
2/2
* The new wire saddle is the same as that listed in the parts guide under 23 - 6.
Loading...