SHARP DTE133 Technical Report

Date: Apr. 4, 1994
DUPLICATOR : SD-3062
[Service information]
No. : DTE-133
PARTS GUIDE CORRECTIONS FOR THE UDH SECTION OF MODEL SD-3062.
1.General: Parts changes have been carried out in the UDH section from the start of mass
production of model SD-3062, and are hereby reported. Corrections of the parts guide should be made.
2.Description: 1. The inside cabinet spacers have been discontinued in accordance with a change in the inside cabinet.
2. Changes have been carried out in the E groove and the E ring of the hinge shaft L and the hinge shaft.
Changed hinge shaft L
Changed E ring (9E 8E)
Changed hinge shaft
Changed E ring (9E 8E)
SHARP CORPORATION Reprography Division
1/7
Green
C
3. A molt has been attached to the hinge SP holder (left side only).
Hinge SP holder Hinge SP guide plate
Added hinge molt (0EUSHE0352D//)
Hinge spring
4. The fall mylar (2 sheets) have been discontinued, and movement sheets (2 sheets) have been added.
Discontinued
Discontinued screw
Discontinued sheet attachment plate
Discontinued fall mylar
Added movement sheets (The quantity listed in P/G 64 - 88 has been changed from 2 to 4.)
2/7
5. Change in the supply form of the hinge SP ring As.
Hinge adjustment shaft.
The parts shown inside the frame should be supplied after checking that they are assembled in the proper direction.
* The direction of assembly of the nuts has been
changed as shown below from 1994 January
production. Hinge adjustment nut Hinge SP ring As
Hinge adjustment nut
(Old) (New)
The parts code of the hinge ring As have been changed as shown below.
0EUANG0323D01 0EUANG0323D02 0EUANG0323D03
(Original P/G entry) (Change in supply form) (Change in the direction
of the adjustment nuts)
* The parts codes originally listed in the P/G and the parts code for the change in the
direction of the adjustment nuts are listed in the parts codes table at the end of the T/R.
6. Change in belt drive belt B and corrections of the parts guide for the belt drive head. The parts name and parts code are mistaken in the parts guide listing for the belt drive head (P/G 66 - 14, 15) and belt drive belt B has been changed. Both this parts guide correction and the change are hereby reported.
Mistaken:
Belt drive belt A (0EUBLT0305D//)
Corrected:
Belt drive belt B (0EUBLT0306D//)
Changed:
Belt drive belt B (0EUBLT0306DZ1)
* The mistaken parts codes and new parts
codes are listed in the parts codes table at the end of the T/R.
Mistaken:
Belt drive belt B (0EUBLT0306D//)
Corrected:
Belt drive belt A (0EUBLT0305D//)
3/7
7 Change in screws in the delivery unit.
Changed screws (LX-BZ4006SC0M LX-BZ0465FCZZ)
8. Change in attachment screws of the position control plate.
Changed screw
Position control plate
XBBSD30P06000 (M3 x 6) XBBSD30P08000 (M3 x 8)
4/7
9. Addition of plastic sliders to the belt drive roller.
Added plastic slider
Added plastic slider
10.Change in manual P/G sheet L, S and R. Manual P/G sheet L 0EUSHE0306D// 0EUSHE0306DZ1 Manual P/G sheet S 0EUSHE0307D// 0EUSHE0307DZ1 Manual P/G sheet R 0E USHE0318D// 0EUSHE0318DZ1
1 1.Addition of a molt and suede to the standard reinforcement R, and the addition of
spacers to the front and rear standard plates.
Spacers added to the standard plate (0EUGUM0306D//)
Front standard plate
Rear standard plate
Suede added to the standard plate (0EUSHE0353D//)
Molt added to the standard plate (0EUSPA0301D//)
Reinforcement R of the standard plate
5/7
Ref.
No.
Model
name
Version P/G No.
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
1
2
3
4
SD-3062 All
6
57 -7
57 -12 0EUSHE0351D// Discontinued Cabinet spacer
57 -27 0EUSFT0329D// 0EUSFT0329DZ1 AN Hinge shaft L
57 -31 0EUSFT0321D// 0EUSFT0321DZ1 AP Hinge shaft
57 -23 XRESP90-08000 Q’ty change E ring (9E)
57 XRESP80-08000 AA E ring (8E) Q’ty: 2
57
64 -73
64 -85 0EUSHE0342D// Discontinued Sheet
64 -86 0EUPLT0323D// Discontinued Sheet fixing plate
64 -88 0EUSHE0317D// Q’ty change Movement sheet
57 -19
57 -20 0EUBOS0302D//
57 -22 0EUANG0323D01
66 -14 0EUBLT0305D// 0EUBLT0306DZ1 AM Belt drive belt B
0EUCAB0310D// 0EUCAB0310DZ1 AV Inside cabinet
1st lot.
0EUSHE0352D// AC Hinge molt Q’ty: 1
0EUBOS0324D// Q’ty change Screw (M3 x 3)
0EUSFT0324D//
0EUANG0323D03 AX Hinge link AS ’94/1
Q’ty:
8 to 6
Q’ty:
8 to 6
Q’ty:
2 to 4
66 -15 0EUBLT0304D// 0EUBLT0305D// AL Belt drive belt A
7
8
9
10
<Interchange>
1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type. New type cannot be used in place of current type.
3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specifie d on es fo r m ai n ta in i ng t he s a fe ty and performance o f th e s et .
70 -6 LX-BZ4006SC0M Q’ty change Screw (M4 x 6)
70
64 -6
64 XBBSD30P08000 AA Screw (M3 x 8) Q’ty: 1
67 LX-WZ0070FCZZ AA Washer Q’ty: 4
73 -33 0EUSHE0306D// 0EUSHE0306DZ1 AF
73 -34 0EUSHE0307D// 0EUSHE0307DZ1 AE
73 -35 0EUSHE0318D// 0EUSHE0318DZ1 AD
!
LX-BZ0465FCZZ AA Screw (M4 x 6) Q’ty: 2
XBBSD30P06000 Q’ty change Screw (M3 x 6)
Manual P/G sheet L
Manual P/G sheet S
Manual P/G sheet R
5. Interchangeable if replaced with same types of relate d parts in use .
6. Others .
1st lot.
Q’ty:
6 to 4
Q’ty:
18 to 17
6/7
* Change supply form and change in direction of assembly.
Ref.
Model
No.
11 SD-3062 All
<Interchange>
1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type. New type cannot be used in place of current type.
3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specifie d on es fo r m ai n ta in i ng t he s a fe ty and performance o f th e s et .
name
Version P/G No.
71 0EUGUM0306D// AB
71 0EUSHE0353D// AC
71 0EUSPA0301D// AC
!
Current parts New parts
Parts code Parts code
5. Interchangeable if replaced with same types of
6. Others .
Price
relate d parts in use .
Parts name
rank
Standard plate spacer.
Standard plate suede.
Standard plate molt.
Effec-
tive
time
1st lot.
Change supply form and change in direction of assembly.
Inter-
change-
ability
Q’ty: 2
Note
7/7
Loading...