SHARP DTE128 Technical Report

Date: Feb. 8, 1994

DUPLICATOR : SD-2060

No. : DTE-128

[Parts change information]

REINFORCEMENT OF THE RADF ROLLER HOLDER (TO PREVENT DAMAGE TO THE ROLLER HOLDER).

1.General: There is a danger of damage occurring to the rear side of the roller holder due to

pressing down on the RADF when making copies of books or other thick originals on model SD-2060. To alleviate this problem, reinforcement of the RADF roller holder has been carried out.

Load

(Rear side)

This area creates a great deal of stress.

(Front side)

2.Description: To alleviate the stress placed on the rear of the roller holder, reinforcement measures have been carried out on the front and rear of the unit. (No problem in particular has arisen in the front side of the roller holder, but since the shape of the front and rear sides of the unit are the same, the change has also been carried out on the front side.

Roller holder

R2 (Reinforcement R)

Direction of load

3.Action: Running change from 1993 Mid-December production.

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

No.

Model

name

Version P/G No.

Current parts New parts

Parts code Parts code

Price

rank

Parts name

Effec-

tive

time

Inter-

change-

ability

Note

SD-2060 All

1. Interchangeable. 4. Not interchangeable.

2. C urr e nt t y pe c a n be u s ed i n p la ce of new t y pe . New ty pe cann ot be us ed i n place of curr ent type .

3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in p la c e of c u rr en t ty p e.

Parts m ar ke d wi t h “ ” is i mp ort an t fo r m a inta i ni ng t he sa fe ty of t he s e t. B e su r e to re pl ace these pa r ts wi t h

specified ones for maintaining the safety and performance of the set.

44 -21

44 -23 0CW2164P141A/ 0CW2164P141B/ AE Roller holder F 1

0CW2164P143A/ 0CW2164P143B/ AE Roller holder R

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others .

See text.

2/2