Date: Jan. 27, 1994
DUPLICATOR : SD-2060
No. : DTE-120
CHANGE PARTS (TO IMPROVE PRODUCTIVITY).
1.General: Var ious parts have been changed in model SD-2060, and these changes are hereby
reported.
2.Description: 1. Change in materials used in the 2000 paper cassette brackets.
The material used in the 2000 paper cassette brackets has been changed from silver
top to SECC-T2J, to improve productivity.
LANGT1354FCZZ LANGT1354FCZ1
(Factory action)
Running change from 1994 Mid-January production.
2. Change in the straight pin of the 1000 paper tray unit and the 2000 paper tray unit.
When attaching the 30 T gear to the paper winding shaft, the clearance of the length of
the straight pin and the gear key groove is so slight that the insertion of the gear is too
tight. To alleviate this problem the total length of the straight pin has been shortened.
LPINS0197FCZZ LPINS0288FCZZ (Quantity: 3)
• 1000 paper tray unit.
Changed
Changed straight pins (there are only 2 straight
pins on the paper guide, but a total of 3 straight
pins have actually been changed.
SHARP CORPORATION Reprography Division
1/3
Green
C
• 2000 paper tray unit.
Caution: It is important to note that the same straight pins have been used in other
locations in the 2000 paper tray unit.
Changed straight pin (3 straight pins in use).
(Factory action)
From 1994 January production.
3. Change in the shape of the upper limit spring in the 1000 paper tray unit.
The shape of the clip portion of the upper limit spring has been changed to eliminate
the need for correction of bent hooks after installing the spring.
Old New
Upper limit spring: MSPRT2071FCZZ MSPRT2071CZ1
(Factory action)
From 1994 January production.
4. The wire return spring and wire collar spring in the 1000 paper tray unit have been
changed.
The shape of the shape has been changed to prevent the dislocation of the twisting
prevention spring of the rear terminal plate harness.
Wire return spring: MSPRT2160FCZZ MSPRT2160FCZ1
Wire collar spring: MSPRT2161FCZZ MSPRT2161FCZ1
2/3
Changed wire return spring.
Changed wire collar spring.
(Factory action)
From 1994 January production.
5. The step screws in the middle paper tray unit have been changed.
The step screws used in the front and rear of the D frame in the upper paper insertion
paper guide have been changed to improve operationability.
Link step screws:
LX-BZ0295FCZZ LX-BZ0295FCZ1
(Factory action)
Running change from 1993 November.
Ref.
Model
No.
1
2
SD-2060 All
3 20 -15 MSPRT2071FCZZ MSPRT2071FCZ1 AB
4
5
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new t ype .
New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe.
New t y pe c a n be u sed in p la ce of cu r ren t ty p e.
Parts m ar ke d wi t h “ ” is i mp ort an t fo r m a inta i ning the sa fe ty of the se t. B e su r e to re pl ace these pa rts wi t h
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
22 -8
20 -94 LPINS0197FCZZ LPINS0288FCZZ AB Pin. ’94/1 1 Q’ty: 3
21 -96 — Change quantity. — Pin. ’94/1 —
21 — LPINS0288FCZZ AB Pin. ’94/1 — Q’ty: 3
20 MSPRT2160FCZZ MSPRT2160FCZ1 AC
20 MSPRT2161FCZZ MSPRT2161FCZ1 AB
31 -37 LX-BZ0295FCZZ LX-BZ0295FCZ1 AC Link step screws.
!
Current parts New parts
Parts code Parts code
LANGT1354FCZZ LANGT1354FCZ1 AM
Price
rank
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Parts name
2000 paper
cassette bracket.
Upper limit
spring.
Wire return
spring.
Wire return
spring.
Effec-
tive
time
See
text.
’94/1 1
’94/1 1 *
’94/1 1
See
text.
* These parts are currently being used in the fixing unit. Wire collar spring.
Inter-
change-
ability
1
1 Q’ty: 2
Note
Q’ty:
5 to 2
3/3
Loading...