![](/html/e1/e10f/e10fec06a6f24498d1d071fd551ac01c0a655277f3fb1db0f07b6ced7d231f48/bg1.png)
Date: Jan. 17, 1994
DUPLICATOR: SD - 2060
1. CHANGE IN MAG NET ATTA CHMENT SCREWS OF THE CENTER TRAY UNIT .
2. CHANGE IN SRAM OF THE OPERATION CONTROL CIRCUIT BOARD (CHANGE IN MAKER).
3. CHANGE IN TONER SCREW SHAFT IN THE TONER BOX UNIT TO IMPROVE
PRODUCTIVITY.
4. PAPER GUIDE CORRECTION.
No. : DTE-108
1. Change in magnet attachment screws of the center tray unit.
1.Model name: SD-2060
2.General: The screws attaching the magnet in the center tray unit have been changed to prevent
them from coming in contact with the paper guide.
3.Cause: The dimensions of the magnet attachment screws have been changed from M3 x 5 to
M3 x 4.
XBBSD30P05000 → XBBSD30P04000
4.Action: (Factory action)
From 1993 October production.
2. Change in SRAM of the operation control circuit board (Change in maker).
1.General: The maker of the SRAM used in the operation control circuit board has been changed
in accordance with parts supply.
2.Description: The parts code for the SRAM has been changed in accordance with the change in
maker, described above.
SRAM change. VHITC5565AF15 → VHI3664BML-12 Q’ty: 3.
3.Action: (Factory production)
From 1994 January production.
SHARP CORPORATION Reprography Division
1/2
Green
C
![](/html/e1/e10f/e10fec06a6f24498d1d071fd551ac01c0a655277f3fb1db0f07b6ced7d231f48/bg2.png)
3. Change in toner screw shaft in the toner box unit to improve productivity.
1.General: The toner screw shaft in the toner box unit has been changed to improve productivity.
2.Description: An unnecessary E-ring ditch has been eliminated (one location).
3.Action: (Factory action)
From 1993 Mid-December production.
4. Paper guide correction.
1.General: The parts listed below have been changed as of the start of mass production.
2.Description: Change in lower separation pawl in the fixing unit.
PTME-0174FCZZ → PTME-0174FCZ1
Change in DPOD switch in the middle tray unit.
QSW-Z0458FCZZ → QSW-Z0475FCZZ
Ref.
Model
No.
1
2
SD-2060 ALL
3
4
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type c a n be u s ed i n p la ce of new t y pe .
New ty pe cann ot be us ed i n place of curr ent type .
3. Current type cann ot be use d in pl ace of new typ e.
New t y pe c a n be u sed in p la c e of c u rr en t ty p e.
Parts m ar ke d wi t h “ ” is i mp ort an t fo r m a inta i ni ng t he sa fe ty of t he s e t. B e su r e to re pl ace these pa r ts wi t h
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
31 -107 XBBSD30P05000 XBBSD30P04000 AA Screws (M3 x 4) 93/10 3
49 -45 VHITC5565AF15 VHI3664BML-12 AU SRAM 94/1
12 -37 NSFTZ1926FCZZ NSFTZ1926FCZ1 AM Screw shaft
11 -63 PTME-0174FCZZ PTME-0174FCZ1 AF
31 -78
!
Current parts New parts
Parts code Parts code
QSW-Z0458FCZZ QSW-Z0475FCZZ AP DPOD switch
Price
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Parts name
rank
Lower
separation pawl
Effec-
tive
time
Mid-
Dec.
1993.
1st lot.
Inter-
change-
ability
1
Note
IC417
IC423
IC426
2/2