Date: Jan. 27, 1994
DUPLICATOR : SD-2060
No. : DTE-106
CHANGE IN PARTS (SD-2060, 3075, 3076, 2075)
1.General: Var ious parts changes have been carried out on model SD-2060, 3075, 3076 and 2075.
2.Description: Item Change.
1. Change in the right exterior upper.
2. Change in the BL PWB.
3. Change of fixing screws for drum flange F.
4. Change in transport roller 4 of the transport unit.
5. Change in the number of transport springs in the transport unit.
6. Change in the doctor suede of the developing unit.
7. Addition of a warning label to the paper tray.
8. Change of B - CL gear 20T in the developing unit.
9. Change in the OC mat.
SHARP CORPORATION Reprography Division
1/4
Green
C
Item 5: Change in quantity of conveyor driven spring A in the conveyor unit.
Conveyor driven spring A: eliminated in 4 locations
(there are, however, 8 other of thesame springs
that are used in the conveyor unit.)
Fig. 1
Item 6: Change in doctor suede in the developing unit.
Changed right doctor suede
(width 7.5 → 5).
Fig. 2
Changed doctor suede
(width 9.5 → 8).
3/4
Item 7: Addition of a warning label to the copy paper tray.
Front cover of the 1000 tray.
Front cover of the 1000 tray.
Bese line.
Bese line.
(The upper tray
is the same.)
Copy paper setting label.
Added copy paper warning label for SCA.
Fig. 3
Front cover of the 1000 tray.
4/4
2/4
Ref.
Model name Subject P/G No. Version Current New
No.
1
2 Change in the BL PWB.
SD-2060
3
4
5
6
Change in the right exterior
upper.
Change of fixing screws for
drum flange F.
Change in transport roller 4
of the transport unit.
Change in the number of
transport springs in the
transport unit.
Change in the doctor suede
of the developing unit.
1 -41
10 -72
51 -901
51 -15 VRD-RC2EY102J
51 -17 VRD-RC2EY511J VRNRC2EK3000F AA Resistor (300Ω , R 23 ~ 30) A 1 X
51 — VRD-RC2EY621J AA
ALL
19 -4 XBPSD40P06KS0 XBPSD40P08KS0 AA Screws (M4 x 8) A 3
14 -112 NROLR0966FCZZ NROLR0965FCZZ AU Conveyor roller 3 G 3
4-1
13 PSHEZ3487FCZZ PSHEZ3487FCZ1 AA Doctor suede A 3
13 PSHEZ3499FCZZ PSHEZ3499FCZ1 AA Right doctor suede A 3
GCAB-0768FCZZ GCAB-0768FCZ1 BF
CPWBF0932FC52 CPWBF0932FC54 BN BL circuit board A 1
MSPRT2040FCZZ
Change in quantity:
(32 → 8)
Change in quantity:
(12 → 8)
Effec-
Price
rank
AA Resistor (1KΩ, R 1 ~ 4) A 1 X
AB Conveyor driven spring A G —
Parts name Cause
Upper portion of the right
cabinet
Resistor
(620Ω , R 9 ~ 22, 31 ~ 44)
Inter-
tive
change-
time
ability
G 1 1st lot X
The resistance of the LED has been changed
to increase the brightness of the trunk lamp.
As a temporary measure, sorting of the LEDs
’93/10
was carried out from the first lot of production,
but this change is a permanent measure.
(Note: the LED is not supplied for servicing
and maintenance.)
A1 X
Mid-
The length of the screws has been increased
Sep.
to improve their effectiveness.
1993.
Transport roller 4 has been eliminated. In its
place transport roller 3 is being used. This
change brings the of transport roller 3 quantity
up to 2.
1st lot.
The spring attached to transport paper guide
G has been eliminated(Quantity:4).
The width of the doctor suede has been
changed to improve the image on the front
’93/8
side of darkened copies.
(Front side: 9.5 → 8, Rear side: 7.5 → 5).
Discription
Figure
availability
X
X
X
Fig. 1
Fig. 2
7 SD-2060
SD-2060
8
SD-3075
SD-3076
SD-2075
SD-3075
9
SD-3076
Reason for cause
A : Quality improvement
B : Productivity improvement
C : Operability improvement
D : Convenience of parts procurement
E : Standardization
F : Serviceability improvement
G : Correction to parts guide
Addition of a warning label to
the paper tray.
Change of B-CL gear 20T in
the developing unit.
Change of B-CL gear 20T in
the cleaner unit.
Change in the OC mat.
22 Australia — TCAUH0985FCZZ AD Paper warning label SCA H — ’93/10
13 -66
16 -24 NGERH0723FCZZ NGERH0723FCZ1 AE B-CL gear 20 T E 1
1 -2 PSHEZ3198FCZZ PSHEZ2459FCZZ AW OC mat E 1
ALL
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type. New type cannot be used in place of current type. 5. Interchangeable if replaced with same types of related parts in use.
3. Current type cannot be used in place of new type. New type can be used in place of current type. 6. Others.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
NGERH0723FCZZ NGERH0723FCZ1 AE B-CL gear 22 T E 3 1st lot. X
Running
change
’92/8.
!
A paper warning label has been added in
accordance with SCA demand.
To establish parts compatibility with model
SD-2060.
The OC mat has been changed to the high
temperature heat resistant mat used in model
SD-2075.
Fig. 3
X
X
Loading...