2.General:Changed parts have been replaced and are in use in the actual machines, but the parts
codes of the old parts (before the change) are listed in the old parts guide
(002SD060PG-M) and are hereby corrected.
Note: Numbers listed in parenthesis ( ) in the “P/G No.” column are the old parts guide
numbers (00ZSD2060PG-M). Parts management should be carried out in
accordance with this technical report, the old parts guide (00ZSD2060PG-M) and
the new parts guide (00ZSD3062PG-M).
See the new parts guide (00ZSD306PG-M) for additional parts that do not appear
in the diagrams.
<Affected Blocks>
2Operation section.
3Copy lamp unit.
4Mirror holder unit 2, 3, 4, 5.
5Optical unit.
6Stopper angle unit.
7Front frame.
8Rear frame 1.
9Rear frame 2.
10Process unit.
11Fusing unit.
12Toner box unit.
13Developer unit.
14Transport unit.
15. Delivery unit.
16Cleaner unit.
17Air paper feeding unit (1000 sheets)
18Air paper feeding unit (2000 sheets)
19Drum flange unit.
201000 Tray unit.
212000 Tray unit.
221000, 2000 Tray cabinet unit
23Fusing drive unit
24Transport drive unit.
25Paper feeding drive unit
26Multi drive unit
27Main motor unit
28Drum drive unit
29Center tray unit 1
30Center tray unit 2 (Suction frame)
31Center tray unit 3
32Switch back unit
33Waste toner case unit
34Multi manual paper feeding unit
35Cooling fan fixing plate unit
36Suction fan unit
38Manual paper feeding tray unit
39MC unit
41TC/AC unit
49Operation control PWB
52AC circuit PWB
1/22
SHARP CORPORATIONReprography Division
Green
C
List of change (Listed on pages 2/22 - 11/22)
2 Operation section.
PG. No. OldNew
2-1
2-1
2-1
2-2
2-2
2-2
2-3
2-3
HINDP0429FCZZHINDP0430FCZZAP
HINDP0430FCZZ
HINDP0433FCZZ
HINDP0437FCZZHINDP0438FCZZAW
HINDP0438FCZZ
HINDP0441FCZZ
HINDP0445FCZZHINDP0446FCZZAW
HINDP0446FCZZ
No change in parts
codes.
No change in parts
codes.
No change in parts
codes.
No change in parts
codes.
No change in parts
codes.
Pricc
rank
AP
AP
AW
AW
AW
Parts nameNote
Key sheet A (English)
(Inch series)
Key sheet A (English)
(Inch series)
Key sheet A (German)
(AB series)
Key sheet B (English)
(Inch series)
Key sheet B (English)
(Inch series)
Key sheet B (German)
(AB series)
Key sheet C (English)
(Inch series)
Key sheet C (English)
(Inch series)
Change in specifications
(English inch series
changed to both English
inch series and AB series).
Change in specifications
(German AB series
changed to both German
AB series and AB series).
Change in specifications
(English inch series
changed to both English
inch series and AB series).
Change in specifications
(German AB series
changed to both German
AB series and AB series).
Change in specifications
(English inch series
changed to both English
inch series and AB series).
2-3
2 -21
2 -11
2 -48
(11)
HINDP0449FCZZ
CPWBN0990FC52CPWBN0990FC53CAOperation control PWBFor SEEG, except German.
XEBSD30P08000Change in quantity.AAScrew (M3 x 8)Q’ty: 29 to 25
LX-BZ3004SCOMChange in quantity.AAScrew (M3 x 4)Q’ty: 6 to 4
LPLTP4413FCZZLPLTP4413FCZ1AFPlate
MLEVP0629FCZ1MLEVP0629FCZ1AHLever
XBBSD40P10000Change in quantity.AAScrew (M4 x 10)Q’ty: 2 to 1
MLEVP0630FCZZMLEVP0630FCZ1AFRear plate lever
LBNDJ2003SCZZChange in quantity.AAWire fixing band (PLT1M)Q’ty: 1 to 2
CGIDH1459FC01CGIDH1459FC03AXSize guide 1000R
LX-BZ0222FCZZChange in quantity.AAScrew (M4 x 4)Q’ty: 27 to 19
MSPRC0760FCZZChange in quantity.ABDrum springQ’ty: 2 to 1
MSPRC0760FCZZChange in quantity.ABDrum springQ’ty: 2 to 1
LX-BZ0689FCZZChange in quantity.AAScrewQ’ty: 6 to 7
XRESP60-07000Change in quantity.AAE type ring (E6)Q’ty: 3 to 2
XRESP70-08000Change in quantity.AAE type ring (E7)Q’ty: 7 to 8
CBLTH0130FC33CBLTH0231FC31AYPaper feeding belt unit
LX-BZ0527FCZZChange in quantity.AAScrew (M4 x 8)Q’ty: 6 to 5
LPLTM4274FCZZLPLTM4274FCZ1AKDelivery plate R
LPLTM4273FCZZLPLTM4273FCZ1AKDelivery plate F
CPLTM4269FC01CPLTM4269FC02ATFixing plate
LX-BZ0527FCZZXHBSD40P08000AAScrew (M4 x 8)Q’ty: 1
Price
rank
Old parts are still used in
other locations.
Parts nameNote
8/22
30 Center tray unit 2.
PG. No. OldNew
30 -43
PGIDM1477FCZZPGIDM1477FCZ1ANS assistance paper guide
31 Center tray unit 3.
PG. No. OldNew
31 -1
31 -9
31 -11
31 -25
31 -33
31 -61
31 -74
31 -86
31 -111
XBPSD30P05K00XBPSD30P04K00AAScrew (M3 x 4K)
MSPRT2051FCZZMSPRT1719FCZZACSpringQ’ty: 4
PGIDH1414FCZZPGIDH1414FCZ1AVUpper paper guide
PGIDH1404FCZZPGIDH1404FCZ1ASPaper guide upper
PGIDH1406FCZZPGIDH1406FCZ1AKSB paper guide
LPINS0096FCZZChange in quantity.ABPin (φ x 10)Q’ty: 5 to 3
PBRSZ0131FCZZPBRSZ0131FCZ1AQD discharge brush
NROLP0989FCZZChange in quantity.ADRoller AQ’ty: 4 to 2
LSTYM0195FCZZLSTYM0195FCZ1AND frame stay
Price
rank
Price
rank
Parts nameNote
Addition of hole for suction
inhalation from 1993
mid-June production.
MSPRT2054FCZZMSPRT2040FCZZABRoller spring AQ’ty: 2
MSPRT2081FCZZMSPRT2047FCZZABValve return springQ’ty: 1
Price
rank
Parts nameNote
32 -36
NBRGY0103FCZZNBRGY0434FCZZANBearingQ’ty: 2
9/22
33 Waste toner case unit.
PG. No. OldNew
33 -30
XEBSD40P08000XEPSD40P10/00AAScrew (M4 x 10)Q’ty: 2
36 Suction fan unit.
PG. No. OldNew
36 -3
36 -4
36 -9
36 -10
PFILZ0200FCZZPFILZ0200FCZ1AWSuction ozone filter
PFILZ0201FCZZPFILZ0201FCZ1BBMC ozone filter
PSHEP3462FCZZPSHEP3462FCZ1ACFST seal 2
PSHEP3461FCZZPSHEP3461FCZ1ACFST seal 1
39 MC unit.
PG. No. OldNew
39 -1
39 -8
CPLTZ4410FC01CPLTZ4410FC02ASMC grid
XBPS230P06KS0XBPS230P04000AAScrew (M3 x 4) (Blue)
Price
rank
Price
rank
Price
rank
Parts nameNote
Parts nameNote
Parts nameNote
41 TC/AC unit.
PG. No. OldNew
41 -12
(12)
41 -12
(13)
41 -12
(14)
41 -8
CSHEP3297FC01
PSHEP3485FCZZ
PSHEP3484FCZZ
CCASZ0248FC01CCASZ0248FC02AUTC case
CSHEP3485FC01ATTC guide sheetChange in unit feeding.
52 AC circuit PWB.
PG. No. OldNew
52 -22
RRLYD4220QCZZRRLYJ3220QCZZAQRelay (G2R-1-SRVD)
Price
rank
Price
rank
Parts nameNote
Parts nameNote
Only the 200V series
(RY 301)
10/22
49 Operation control PWB.
PG. No. OldNew
49 -22
49 -50
49 -901
VCKYTV1HB102KChange in quantity.AACapacitor (50WV 100pF)
VHI27C51225FCVHI27C51226FCAZ
CPWBN0990FC52CPWBN0990FC53CA
Back side of circuit board.
Price
rank
Discontinued.
Added diode.
Parts nameNote
Q’ty: 5 to 3
(C 555, 556 discontinued.)
IC data ROM (IC 428)
(English)
Operation control PWB
(English)
From the start of mass production to 1993 August
production, the diodes (D401, 402) were located
on the back side of the circuit board. From 1993
September production the diodes are located on
the front side of the circuit board in accordance
with a change in the circuit pattern of the circuit
board.
—LPLTM4521FCZZARCaster SUB plateQ’ty: 2
—PSEL-0560FCZZAFSeal DQ’ty: 1
—MSLI-0123FCZZAZFU sliderQ’ty: 2
—PSHEP3476FCZZAFChassis sheetExcept USA, Canada
—PGIDH1483FCZZAHSuction upper guide
—PTME-0224FCZZACSeparator pawl F
—PTME-0225FCZZACSeparator pawl R
—LX-WZ0324FCZZABSeparator pawl washerQ’ty: 4
—PSHEP3553FCZZAFSB lower sheetQ’ty: 2
•The nip width when pressure is applied to the heat roller has been increased in order to lessen the shock of
the fed paper during paper feeding to the copy paper heat roller, and prevent printing misalignment.
(Fusing unit, rear side)
PSPAZ0527FCZZ
12.5
USA: From the first lot to
1993 mid-May
production.
PCLR-0390FCZZ
16
Permanent measure: From 1993 September production.
Permanent measure:
USA: From 1993 mid-May production to
Other: From the first lot.
8
8
Changed
(export models only)
1993 August production.
Added plastic slider.
* The changes described above have also been carried out on the front side of the fusing unit.
13/22
When attaching the fusing cover to the fusing unit, the FU toner receiving plate sometimes comes in contact
with the upper heat roller, which damages the heat roller. To alleviate this problem, teflon tape (FU protection
sheets) has been been attached to both ends of the FU toner receiving plate.