Page 1
Date: Jun. 23, 1993
DUPLICATOR : SD-3076
1. RELEASE OF THE HIGH ALTITUDE USE OSCILLATOR ELEMENT AS A SERVICE PARTS
2. DISCONTINUED USE OF THE MYLAR SHEET OWING TO A CHANG E IN THE PROCESS
CONTROL SENSOR
3. PARTS GUIDE CORRECTION
4. CHANGE IN THE RDH FRONT CABINET AND TOP RIGHT CABINET HOLDING SCREWS TO
AVOID STRIPPING OF PLATING
5. CHANGE IN THE RDH BALANCERS FOR PRODUCTIVITY ENHANCEMENT
No. : DTE-088
1. Release of the high altitude use oscillator element as a service parts
1.Model name: SD-3075 / 3076 / 2075
2.General: As the board incorporating the oscillator element for a high altitude area is in supply as
the vacuum control board, the oscillator element for the high altitude area is now
available as a service parts.
3.Description:
Parts name Parts code Price rank
Oscillator element for the high altitude area (CSA330MG102) 0DM3S21168/// AT
4.Action: Available as a service parts only.
2. Discontinued use of the mylar sheet owing to a change in the process control sensor
1.Model name: SD-3075 / 3076
2.General: Tow sensor mylar sheets attached to the process control sensor are now discontinued
to use after a structural change in the sensor.
3.Description: The mylar sheets being used now are replaced by implementation of ribs. The use of
the mylar sheets are discontinued after the change.
SHARP CORPORATION Reprography Division
1/5
Green
C
Page 2
(Current) (New)
Sensor mylar sheets attached
PSHEP3234FCZZ
Ribs added after the structural change.
4.Action: (Factory action)
From May 1993.
3. Parts guide correction
1.Model name: SD-3075 / 3076
2.General: Please note change in the SD-3075 and SD-3076 Parts Guide for design change
since the first production unit. This has to be corrected in your Parts Guide.
3.Description: Correction in parts guide description
Correction is need for the fan quelling mylar sheet-2 shown in Parts Guide No. 30 -91
that it is only for the export version AB series machine.
30 -91 0IA42341-01A/ AM EG Fan quelling mylar sheet-2
30 -91 0IA42341-01A/ AM EG
Fan quelling mylar sheet-2
(Export —- AB series)
Sevice Hint
Apart from this, it could prevent a paper misfeed for the double-sided tray by adding
the fan quelling mylar sheet to the inch version SD-2075, same as SD-3075.
2/5
Page 3
4. Change in the RDH front cabinet and top right cabinet holding screws to avoid
stripping of plating
1.Model name: SD-3075 / 3076 / 2075
2.General: To avoid stripping of plating over the screw that employed to hold the RDH front
cabinet and the upper right cabinet, change is made to the screw.
3.Reason: This is to avoid stripping of plating of the external cabinet holding screw.
4.Descriptionl: The screw plating is changed from chrome to unichrome.
RDH front cabinet
Changed
Upper right cabinet
Screws changed.
5.Action: (Factory action)
Since April 1993.
3/5
Page 4
5. Change in the RDH balancers for productivity enhancement
1.Model name: SD-3075 / 3076
2.General: Owing to the reason given next, the RDH balancer is procured from another
manufacturer.
3.Reason: This is for productivity enhancement.
4.Description: The change in the balancer involves change in its parts code. Please note that two
E-rings (E9) are newly used on the front side.
RDH front side
E-rings (E9) are added with this change.
Changed
MSPRB1744FCZZ MSPRB1986FCZZ
MSPRB1743FCZZ MSPRB1987FCZZ
Changed
MSPRB1744FCZZ MSPRB1986FCZZ
E9 added
E9 added
4/5
Page 5
Ref.
Model
No.
SD- 3075
1
SD- 3075
2
SD- 3075
SD- 3075
3
SD 2075
SD- 3075
4
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new t ype .
New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe.
New t y pe c a n be u sed in p la c e of c u rr en t ty p e.
Parts m ar ke d wi t h “ ” is i mp ort an t fo r m a inta i ni ng t he sa fe ty of t he s e t. B e su r e to re pl ace these pa rts wi t h
specified ones for maintaining the safety and performance of the set.
name
3076
2075
3076
3076
3076
2075
3076
Version P/G No.
59
14 -167
14 168
2 -63
38 -D98
All
2 -58
39 7
40 -42
40 -41
40 -120
40
!
Current parts New parts
Parts code Parts code
— 0DM3S21168/// AT
VHPGP4S09//-1 VHPGP4S09//-2 AV
PSHEP3234FCZZ Discontinued — Sensor mylar Q’ty: 2
XBTSE40P14000 XBTSE40P16000 AA M4x16 screw
XBTSC40P16000 XBTSE40P16000 AA M4x16 screw 1 Q’ty: 1
XBTSE40P08000 XBTSE40P16000 AA M4x16 screw 1 Q’ty: 2
MSPRB1744FCZZ MSPRB1986FCZZ BA
MSPRB1743FCZZ MSPRB1987FCZZ AZ
— XRESP90-08000 AA E-ring (E9) — Q’ty: 2
Price
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
rank
High altitude
oscillator
Process control
sensor
Upper transport
balancer
Open and shut
gas balancer
Parts name
Effective
time
——
’93/5 5
’93/4
’93/8
Inter-
change-
ability
1 Q’ty: 2
1 Q’ty: 1
1 Q’ty: 2
Note
Service
parts
5/5
Loading...