Rev. 6.0
SHARP
IoT Gateway User’s Guide
Model: DN3E6JE074
Introduction
This document describes the IoT Gateway (Model DN3E6JE074) overview and how to use the Z-Wave functionality.
Feature Overview
The IoT Gateway is a Gateway for IoT with functions of LTE, Wireless LAN, Z-Wave and BLE communication. It can collect
sensing data from various Z-Wave and BLE sensor devices, and upload it to cloud server by LTE function anywhere LTE
communication is available.
The IoT Gateway has the following general features:
- LTE communication (SIM Free)
- Wireless LAN Access Point
- 1 LAN Port
- Z-Wave communication
- BLE communication
Product Drawings
Front side
Back side
Installation
The installation of the IoT Gateway is only one step process:
1- Connect AC Adapter to the Gateway and plug it into AC outlet. The Gateway has no Power Switch. It will power up as soon
as plugged in the AC Adapter.
If you don’t use LTE network connection, the Gateway needs to be connected to internet via LAN port.
LED Normal Operation
- LTE LED turns ON when LTE connection established.
- WLAN LED turns ON when Access Point function is enabled, and blinks when received a packet.
- Z-Wave LED turns ON when Z-Wave function is ready, and blinks when received a packet.
- BLE LED turns ON when BLE function is ready, and blinks when received a packet.
- LAN LED blinks when received a packet via LAN port.
- Power LED always ON when powered.
Z-Wave Overview
General Information
Device Type
Gateway
Role Type
Central Static Controller (CSC)
Command Class
Support
COMMAND_CLASS_APPLICATION_STATUS
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_CRC_16_ENCAP
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_SECURITY
COMMAND_CLASS_VERSION_V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Control
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_BASIC
COMMAND_CLASS_CRC_16_ENCAP
COMMAND_CLASS_MULTI_CHANNEL _V4
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
COMMAND_CLASS_WAKE_UP_V2
COMMAND_CLASS_BATTERY
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_DOOR_LOCK_V2
COMMAND_CLASS_INDICATOR
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_METER_V3
COMMAND_CLASS_NODE_NAMING
COMMAND_CLASS_NOTIFICATION_V8
COMMAND_CLASS_SENSOR_MULTILEVEL_V11
Interoperability
Any products from different manufacturers and product categories can be a part of the same Z-Wave network with the IoT
Gateway, and that the different non-battery powered nodes can act as repeaters regardless of manufacturers.
Security Enabled Z-Wave Plus Product
The IoT Gateway is a Security Enabled Z-Wave Plus Product.
Basic Command Class Handling
The IoT Gateway will ignore Basic Commands received from other devices on the Z-Wave network.
Support for Association Command Class
Group id: 1 – Lifeline
Maximum number of devices that can be added to the group: 5
All devices are associated with the group.
Loading...