Sharp DMR0164 Users Manual

1200 WATTS/1600 WATTS/1800 WATTS/2100 WATTS-HEAVY DUTY COMMERCIAL MICROWAVE OVEN

MODELS R-22GV/R-22GT/R-23GT/R-24GT/R-25JT

OPERATION MANUAL

FOR CUSTOMER ASSISTANCE

To aid in reporting this commercial microwave oven in case of loss or theft, please record below the model number and serial number located on the unit. We also suggest you record all the information listed and retain for future reference.

MODEL NUMBER SERIAL NUMBER DATE OF PURCHASE Dealer Telephone Servicer Telephone

TO PHONE:

SERVICE and PARTS (for your nearest Sharp Authorized Servicer and Parts Distributor)

United States .................................. 1-800-BE-SHARP(237-4277)

ADDITIONAL

CUSTOMER INFORMATION ............................................. 201-529-8706

TO WRITE:

For additional information:

Commercial Microwave Oven Department Sharp Electronics Corporation Sharp Plaza, Box 650 Mahwah, NJ 07430-2135

For service problems, warranty information, missing items and other assistance:

Sharp Electronics Corporation Customer Assistance Center 1300 Naperville Drive Romeoville, IL 60446-1091

Please provide the following information when you write or call: model number, serial number, date of purchase, your complete mailing address (including zip code), your daytime telephone number (including area code) and description of the problem.

CONTENTS

For Customer Assistance ................ Front cover

Contents .......................................................... 1

Precautions to Avoid Possible Exposure to

Excessive Microwave Energy ...................... 1

Limited Warranty ............................................. 2

Important Safety Instructions........................... 3

Service Call Check .......................................... 4

Grounding Instructions .................................... 5

Installation ....................................................... 6

Part Names ..................................................... 7

Before Operation ............................................. 8

Memory Operation .......................................... 8

Cooking with memory .................................. 8

Cooking double quantity with memory ......... 8

Memory program entry ................................. 9

Memory check............................................ 10

Manual Operations ........................................ 11

Time cooking.............................................. 11

Multiple sequence cooking ......................... 11

Express Defrost ......................................... 12

Express Defrost Chart ................................ 12

Counter check ............................................ 13

Other Convenient Features ........................... 14

Signal setting ............................................. 14

Demonstration mode .................................. 14

Care and Cleaning ........................................ 14

Cooking Guide .............................................. 16

Utensils ...................................................... 16

Guidelines for microwave heating .............. 17

Timing guide .............................................. 18

Heating and cooking time guide ................. 19

Reminders ..................................................... 21

Specifications ................................................ 21

Auto-Touch Guide ...........................22•Back cover

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE

TO EXCESSIVE MICROWAVE ENERGY

(a) Do not attempt to operate this oven with the door open since open-door operation can result

in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.

(b) Do not place any object between the oven front face and the door or allow soil or cleaner

residue to accumulate on sealing surfaces.

properly and that there is no damage to the: (1) door (bent), (2) hinges and latches (broken or loosened), (3) door seals and sealing surfaces.

(d) The oven should not be adjusted or repaired by anyone except properly qualified service

personnel.

LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first end-user purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part there of with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.

To the extent permitted by applicable state law, the warranties set forth herein are in lieu of, and exclusive of, all other warranties, express or implied. Specifically, ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED. ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. If, under applicable state law, implied warranties may not validly be disclaimed or excluded, the duration of such implied warranties is limited to the period(s) from the date of purchase set forth below.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.

The warranties described above shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.

Your Product Model Number & Description:

R-22GV/R-22GT/R-23GT/R-24GT or R-25JT Commercial Microwave Oven (Be sure to have this information available when you need service for your oven.)

Warranty Period for this Product:

Additional Item(s) Excluded from Warranty Coverage (if any):

Where to Obtain Service:

TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.

Save the proof of purchase as it is needed should your oven require warranty service.

Three (3) years for parts and labor in the end user’s place of business.

Non-functional accessories and light bulb.

Contract your Sharp Authorized Servicer to obtain onsite service for this Product. The Servicer will come to your location and if it is necessary to remove the Product, the Servicer will reinstall it. Be sure to have Proof of Purchase available.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances basic safety precautions should be followed, including the following:

WARNING - To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive

microwave energy:

1. Read all instructions before using the appliance.

2. Read and follow the specific

EXPOSURE TO EXCESSIVE MICROWAVE ENERGY”

3. This appliance must be grounded. Connect only to properly grounded outlet. See

“GROUNDING INSTRUCTIONS” on page 5.

4. Install or locate this appliance only in accordance with the provided installation instructions.

5. Some products such as whole eggs and sealed containers – for example, closed glass jars – may explode and should not be heated in this oven.

6. Use this appliance only for its intended use as described in this manual. Do not use corrosive chemicals or vapors in this appliance. This type of oven is specifically designed to heat, cook or dry food. It is not designed for industrial or laboratory use.

7. As with any appliance, close supervision is necessary when used by children.

8. Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped.

9. This appliance should be serviced only by qualified service personnel. Contact nearest Sharp Authorized Servicer for examination, repair or adjustment.

10.Do not cover or block any openings on the appliance.

11.Do not store this appliance outdoors. Do not use this product near water – for example, near a kitchen sink, in a wet basement or near a swimming pool and the like.

12.Do not immerse cord or plug in water.

13.Keep cord away from heated surfaces.

14.Do not let cord hang over edge of table or counter.

15.See door surface cleaning instructions on pages 14-15.

16.To reduce the risk of fire in the oven cavity: a. Do not overcook food. Carefully attend appliance if paper, plastic or other combustible materials

are placed inside the oven to facilitate cooking. b. Remove wire twist-ties from paper or plastic bags before placing bag in oven. c. If materials inside the oven should ignite, keep oven door closed, turn oven off and disconnect the

power cord or shut off power at the fuse or circuit breaker panel. d. Do not use the cavity for storage purposes. Do not leave paper products, cooking utensils or food

in the cavity when not in use.

“PRECAUTIONS TO AVOID POSSIBLE

on page 1.

SAVE THESE INSTRUCTIONS

SERVICE CALL CHECK

Please check the following before calling for service!

1. Plug the power cord into a three-pronged electric-outlet. (See page 5)

2. Place one cup of water in a glass measure in the oven and close the door securely. A. Does the oven light come on? Yes ______ No _______

B. Does the cooling fan work? Yes ______ No _______

(Put your hand over the back ventilating opening.)

C. If "No", please check wall outlet and circuit breaker.

3. Touch these pads:

SELECTATIME

A. Does the "ON" indicator come on? Yes ______ No _______ B. At the end of 1 minute, is the water hot? Yes ______ No _______

IF SERVICE IS NEEDED, PLEASE CONTACT YOUR NEARE

START

ST AUTHORIZED SHARP SERVICER.

ERROR MODE

Should any of the error indicators appear in the readout, follow the instructions:

EE Mode Reason Action Required

EE 1, EE 2 Magnetron failure Call for service.

EE 3 Both magnetrons failed Call for service.

EE 4 Voltage too high Follow instructions on page 5 of Operation R-23GT, R-24GT Manual under VOLTAGE SELECT to change and R-25JT only from 208V to 230V. If problem is not corrected,

call an electrician.

EE 5 Voltage too low Follow instructions on page 5 of Operation R-23GT, R-24GT Manual under VOLTAGE SELECT to change and R-25JT only from 230V to 208V. If problem is not corrected,

EE 6, EE10, EE16

EE 7 Exhaust air temperature too high Check that nothing is blocking air intake open-

Thermistors failure Call for service.

call an electrician.

ings on oven back or that oven exterior is very hot. Correct. Wait a few minutes and try again. If problem persists, call for service.

★

EE 8 Circuit failure Call for service.

EE 9 Maximum time is exceeded Check page 11 in the Operation Manual.

EE 0 Fan lock error Call for service.

EE17 Magnetron temperature too high Touch STOP/CLEAR pad. Wait a few minutes

★

EE 1 and EE 2: Can continue to use oven before service; however, check food carefully as additional

cooking time will be needed.

Any time the EE is flashing, the servicer should be called. When EE is not flashing, check the reason and correct. Service is not necessary.

Touch STOP/CLEAR pad, and reprogram correctly.

and try again. If problem persists, call for service.

Receptacle Box Cover

3-Pronged plug (6-15P) R-24GT (6-20P) R-25JT

3-Pronged, Receptacle (6-20R)

Receptacle Box Cover

3-Pronged plug (6-15P)

3-Pronged, Receptacle (6-15R)

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING – Improper use of the grounding plug can result in a risk of electric shock. The electrical

requirements are 120 Volt, 60 Hz AC only, 20 Amp or more (R-22GV,R-22GT); 230/208 Volt, 60 Hz, AC only, 15 Amp or more (R-23GT) and 20 Amp or more (R-24GT, R-25JT) fused electrical supply. It is recommended that a separate circuit serving only this appliance be provided. When installing this appliance, observe all applicable codes and ordinances. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord should be AC 120 Volt 20 Amp (R-22GV,R22GT), AC 230/208 Volt 15 Amp (R-23GT), AC230/208 Volt 20 Amp (R-24GT, R-25JT). Consult a qualified electrician or serviceman if the grounding instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded.

Receptacle Box Cover

3-Pronged plug (5-20P)

3-Pronged, Receptacle (5-20R)

120V 20A R-22GV,R-22GT

230/208V 15A R-23GT

Radio or TV Interference

Should there be any interference caused by the microwave oven to your radio or TV, check that the microwave oven is on a different electrical circuit, relocate the radio or TV as far away from the oven as feasible or check position and signal of receiving antenna.

VOLTAGE SELECT

The R-23GT, the R-24GT and the R-25JT have been preset for 230V operation. If you need to change this oven for 208V operation, follow instructions below.

1. Unplug oven.

2. Remove one screw(A) from the Voltage Select Cover located on back of the oven near the bottom.

3. Remove the Voltage Select Cover and rotate 180 degrees.

4. Reinstall the Voltage Select Cover using one screw(A) removed in Step 2.

5. Plug power cord into wall outlet.

Your oven is now ready for 208V, 60Hz operation. Note: If “EE4” or “EE5” appear in the lighted digital

display, a voltage adjustment must be made.

230/208V 20A R-24GT, R-25JT

208 V

230 V

(A)

230 V

208 V

INSTALLATION

Because your Sharp Commercial Microwave Oven will be used frequently, place it so that there is easy access for all users.

1. Be sure all electrical requirements are met. See page 5.

2. Exhaust vents are on the back of the unit near the top. Install the unit at least 2 inches away from the nearest wall to permit adequate ventilation for proper cooling and air flow in the oven.

3. Install the unit where no excessive heat or steam are generated. Do not place next to an oven or cooking surface.

4. The unit may be secured to a countertop or stand. There is a screw hole in the bottom of the unit. After the oven is permanently placed, drill a hole through the counter top for a 3/16 inch self-tapping screw. The hole should be 12 inches from the hinge side of the oven door and 51/4 inches back from the front edge of the removable filter.

5. STACKING PROCEDURE FOR TWO MICROWAVE OVENS Two units can be installed together by placing one on top of the other. Follow these instructions: a. Place oven A in the desired location. Position Oven B on top of Oven A as shown in the figure. b. Remove Screws (b) from the lower edge of the back of Oven B. c. Loosen Screw (a) which holds Mounting Plate A on the back of Oven A. d. Turn Mounting Plate A 180° so that it is on the lower edge of Oven B. e. Using Screw (b) removed in step b, install Mounting Plate A to the lower edge of Oven B as shown

in the figure. f. Tighten Screw (a) which was loosened in step c. g. Remove another Screw (a) which holds Mounting Plate B on the back of Oven B. Remove Mounting

Plate B. h. Replace Screw (a) removed in step g and tighten. i. Remove Screw (c) from the rear of Oven A. j. Remove Screw (d) from the rear of Oven B. k. Turn Mounting Plate B and position it on Ovens A and B as shown in the figure. Using Screws (c)

and (d), fasten Mounting Plate B in place.

WARNING:

When two ovens are installed together by placing one on top of another:

1. Always use two mounting plates.

2. Make sure that the power supply cords are not caught between the ovens.

3. Do not install more tha one oven on top of another.

Oven B (Back)

Rear cabinet

Screw (d)

Screw (c)

Mounting plate B

Mounting plate A

Screw (b)

Screw (a)

Oven A (Back)

Rear cabinet

Figure

PART NAMES

14 18

1. Touch control panel

2. Door latch openings

3. Ceramic shelf

4. Splash cover

5. Oven light

6. Air intake filter

7. Air intake openings

8. Door seals and sealing surfaces

9. Door hinges

DEFONNO.X2CHECK

19 19

DOUBLE

QUANTITY

EXPRESS

DEFROST

20 20

1 2 3 4 5

6 7 8 9 0

SELECTA

TIME

STOP

CLEAR

SET CHECK SIGNAL

START

678

DOUBLE

QUANTITY

SELECTATIME STOP/CLEAR

SELECTAPOWER

SET CHECK SIGNAL

(R-22GV/R-22GT

R-23GT/R-24GT)

DEFONNO.X2CHECK

(R-25JT)

10.Oven door with see-through window

11.Door latches

12.Door handle

13. Service window for replacing the oven light bulb

14.Ventilation openings

15.Power supply cord

16.Mounting plate

17.Screw for mounting plate

18.Voltage select cover (R-23GT/R-24GT/R-25JT)

19.DOUBLE QUANTITY pad

20.EXPRESS DEFROST pad

EXPRESS DEFROST

21.Ten number pads for time and memory programming

22.SELECTATIME pad

23.STOP/CLEAR pad; touch to stop operation of oven and clear remaining heating time

24.SELECTAPOWER pad for setting variable power level

25.START pad; touch to operate oven after door is closed and

START

time is set

26.SET pad for setting memory

27.CHECK pad for checking memory

28.SIGNAL pad for setting signal sound

8 9

Accessory: Menu labels

23 25

R-22GV R-22GT,R-23GT,R-24GT,R-25JT

+ 16 hidden pages