SHARP dce018 Technical Report

Digital Compound Machine:AR-160/161Series l AL-1610Series

Date

:

Apr. 23,1999

[Service Information]

Supply of service unit for the process unit

No. : DCE-018

1. Model Name: AR-160/161Series

l

AL-1610Series

2. General: Since the process unit of the above models in which the sub-blade is welded can not be supplied,
the service unit is supplied. When replacing the sub-blade, use the following unit.

3. Description: The process frame unit (figure below 501) is added.
Model Unit code Name

AR-160/161Series CFRM-0021QS51 Process frame unit
AL-1610Series CFRM-0021QS53 Process frame unit

Model

name

AR-160/161
Series

AL-1610
Series

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.

Version P/G No.

Overseas - - CFRM-0021QS51 HG/BK Process frame unit 1st lot 6

Overseas - - CFRM-0021QS53 HG/BK Process frame unit 1st lot 6

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of related
parts in use.

6. Others.

Price

rank

SHARP CORPORATION Document Division II

Parts name

Effec-

tive

time

Inter-

change-

ability

Orange

C

Note