SHARP CX221 Technical Report
Date: Sep. 11, 1996
COLOR IMAGE SCANNER: JX-AF2
No. : CX-221
(Part change information)
ADDITION OF PARTS IN COMPLIANCE WITH
THE CE MARK (EN55022).
1.Model Name: JX-AF2
2.General: A core has been added to the tip of the I/F cable (on the interface PWB side) as a
measure to establish compliance with the CE mark for the models listed above that are
bound for Germany. The core has been affixed with a fixing band as shown in the figure
below.
3.Description:
Fixing band
LBNDJ1002HCZZ
Ferrite core
ZCAT1518-0730
(TDK)
Ferrite core (RCORF6649RCZZ)
ZCAT1518-0730 (TDK)
∗The ferrite core should be affixed to the tip
of the I/F cable by means of a fixing band.
Added grounding wire, attached from
the GND terminal of the interface
PWB to the I/F cable shield.
Ferrite core
TDK
ZCAT1325-0530
Fixing band
LBNDJ1002HCZZ
The grounding wire should
be affixed to the I/F cable
shield section by means of
a fixing band.
4.Action: From 1996 June production.
SHARP CORPORATION Printer and Scanner Division
1/2
Orange
C
Ref.
Model
No.
1 JX-AF2 Germany
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p lac e of n ew type.
New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be us ed i n place of new ty pe.
New t y pe c a n be u sed in pla c e of c u rr en t ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
2—
!
Current parts New parts
Parts code Parts code
RCORF6649RCZZ AK
LBNDJ1002HCZZ AA Fixing band
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Ot hers.
Price
rank
Core
(ZCAT1518-0730 TDK)
Parts name
Effec-
tive
time
96/6 6
Inter-
change-
ability
Note
2/2
Loading...