SHARP CX204 Technical Report

Date: Dec. 12, 1995

COLOR IMAGE SCANNER: JX-AF3

Parts change information

No. : CX-204

CHANGES IN PARTS TO IMPROVE PRODUCT QUALITY.

1.Model name: JX-AF3

2.General: Changes have been carried out in the parts described below to improve product quality.

3.Description: ➀ The shape of the hinge base has been changed as an improvement measure for

skewing.

Old. New.

Hinge base. LCHSM7018XCZZ LCHSM7018XCZA

➁ A poly-slider (LX-WZ1025HCZZ) has been added in the location indicated in the

figure below to lighten the movement of the pick up unit.

➂ Torque grease (parts no. GP-501MR) has been applied to the manual feed gear and

manual feed rack in order to improve the maintainability of the original document guide. Also, the feeding roller is to be cleaned with alcohol during maintenance operations to the pick up performance (refer to the figure shown below).

Added poly-slider (LX-WZ1025HCZZ)

The feeding roller should be cleaned with alcohol during maintenance operations.

Application of torque grease. (Product no. GP-501MR).

4.Action: ➀, ➁ :From 1995 September production. ➂ :From 1995 July production.

SHARP CORPORATION Printer and Scanner Division

1/2

Orange

Ref.

Model

No.

1 JX-AF3 All

1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

speci fied ones fo r m aintaini ng t he s a fe ty an d pe rformance of the set .

name

Version P/G No.

1 -17 3 — LX-WZ1025HCZZ AA Poly-slider 6

Current parts New parts

Parts code Parts code

LCHSM7018XCZZ LCHSM7018XCZA AZ Hinge base

Price

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others .

Parts name

rank

Effec-

tive

time

’95/9

Inter-

change-

ability

Note

2/2