SHARP CX162 Technical Report

Date: Nov. 7, 1994

OPTION: JXAF3

No. : CX-162

[Parts change information]

1. ADDITION OF THE INSTRUCTION LINE LABEL (JXAF3)

2. PARTS CHANGES DUE TO EMI AND THE SAFETY STANDARD (JX3F6/12)

3. CHANGE OF ATTACHMENT SCREWS OF UPPER AND LOWER CABINET
(JX3F6/12 ETC.)

1. Addition of the instruction line label

1.Model name: JXAF3

2.General: We have added the instruction line label to indicate the capacity of copies in ADF inside

the restriction plate R as shown in the illustration below. This is to improve its function.

3.Description: We have added the instruction line label to the position as follows.

Addition of the instruction line label
TLABH7334XCZZ

Restriction plate R

4.Action: From the first lot

2. Parts changes due to EMI and the safety standard

1.Model name: JX3F6/12

2.General: We have changed the form of the harness grounding plate B, and materials of the CCD

cover and the carriage cover to satisfy the EMI and the safety standard.

Orange

C

SHARP CORPORATION Printer and Scanner Division

1/3

3.Description: ➀ We have changed in forms of the harness grounding plate B to make sure the

harness relay wiring. The parts code of the harness grounding plate B has been also
changed due to this change.

Harness relay

Change of the harness grounding
plate B
QEARP7007XCZA

➁ We have changed the materials of the CCD cover and the carriage cover to the UL to

improve in safety. Their parts’ codes have been also changed due to this change.

4.Action: From August 1994 production ………… USA
From the first lot ………………………… Except the USA

Change of the carriage cover
PCOVU7019XCZB

Change of the CCD cover
PCOVP7018XCZB

2/3