
Date: Oct. 28, 1994
COLOR IMAGE SCANNER : JX3F12
No. : CX-161
[Parts change information]
1. PARTS ADDITION AND DISCONTINUANCE
DUE TO DEAL WITH NEEDLESS RADIATION
2. CHANGE OF FILM CLUMP THICK
1.Model name: JX3F6, JX3F12, JXAF3
2.General: We have added or eliminated the parts such as cables or cores to exclude needless
radiation.
3.Description: ➀ Attach the aluminum tape to the CCDFCC cable of the JX3F6 and 12 models. We
have changed the parts code due to this attachment as described as follows.
<Current>
QCNW-7058XCZZ
(Without aluminum tape)
CCDFCC cable Attach aluminum tape
80
2mm2mm
75
8
The side of letters shown
➁ We have discontinued two cores set in
the CCD cable of the model JX3F6 and 12.
(With aluminum tape)
520
<New>
CCNW-7058XC01
17
Scanner unit
(See the illustration shown in right)
SHARP CORPORATION Printer and Scanner Division
Discontinued RCORF2007SCZZ
FSU relay PWB
1/3
Orange
C

➂ We have changed the core set in FSU I/F cable of JX3F6 and 12.
<Curre n t> <New>
RCORF6663RCZZ RCORF6666RCZZ
FSU I/F cable
Change core
➃ Add cores, conductive clumps, holders and binding bands to the ADF IF cable and
the sensor cable in the JXAF3. (See the illustration below)
Add conductive clumps
LHLDC1012LCZZ
Add cores
RCORF6662RCZZ
Add conductive clumps
LHLDC1012LCZZ
ADF driving motor section
Add cores
RCORF6649RCZZ
Add bands
LBNDJ1002HCZZ
Add conductive clumps
LHLDC1012LCZZ
Add cores
RCORF6649RCZZ
Add bands
LBNDJ1002HCZZ
Add bands
LBNDJ1002HCZZ
Add cores
RCORF6649RCZZ
ADF relay PWB
Add cores
RCORF6649RCZZ
Add core fixing holders
LFIX-7026XCZZ
ADF relay
PWB
RCORF6649RCZZ
4.Action: From the first lot
2/3
ADF sensor section

2. Change of film clump thick
1.Model name: JX3F6 and 12
2.General: We have decreased the slip between the transparent unit glass side and the film clump
from 8.8 mm to 7.8 mm in the case of using it. We have changed the parts code due to
this change.
3.Description: <Current> <New>
JX3F6/12 Film clump 35AS CCRA-7005XC01 CCRA-7005XC02
(8.8 mm thick) (7.8 mm thick)
<Current> <New>
JX3F12 Film clump 4x5AS CCRA-7007XC01 CCRA-7007XC02
(8.8 mm thick) (7.8 mm thick)
4.Action: From September 1994 production
Ref.
Model
No.
JX3F6
JX3F12
1
JXAF3
JX3F6
2
JX3F12
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new t ype .
New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe.
New t y pe c a n be u sed in p la c e of c u rr en t ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
1 -33 QCNW-7058XCZZ CCNW-7058XC01 AY CCDFFC cable ’94/5 3 ➀
1 RCORF2007SCZZ — — Core ’94/5 6 ➁
1 RCORF6663RCZZ RCORF6666RCZZ AM Core ’94/5 3 ➂
1 — LHLDC1012LCZZ AF
1 — RCORF6662RCZZ AK Core ’94/5 6 ➃
1 — RCORF6649RCZZ AK Core ’94/5 6 ➃
EX
1 — LFIX-7026XCZZ AE
1 — LBNDJ1002HCZZ AA Band ’94/5 6
4 -10
5 -14
5 -12 CCRA-7007XC01 CCRA-7007XC02 BF
!
Current parts New parts
Parts code Parts code
CCRA-7005XC01 CCRA-7005XC02 BH
Price
rank
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Parts name
Conductive
clump
Core fixing
holder
Film clump
35AS
Film clump
4x5AS
Effec-
tive
time
’94/5 6 ➃
’94/5 6 ➃
’94/9 3
’94/9 3
Inter-
change-
ability
Note
➃ Q’ty
Change
5 → 9
3/3