SHARP CX146 Technical Report

Date: Nov. 18, 1993

COLOR IMAGE SCANNER : JX-325

1.ADDITION AND ELIMINATION OF PERMEATION UNIT PARTS AND
DIMENSION ALTERATION.

2.DIMENSION ALTERATION AND SUPPLIER CHANGE OF OPTICAL UNIT.

3.ADDITION OF EARTH CABLE WARNING LABELS AND EARTH TAPE.

No. : CX-146

1 Addition and elimination of permeation unit parts and dimension alteration.

1.Model name: JX-32F3, JX-32F6, JX-32F12

2.General: The permeation unit dimension alterations and parts addition and elimination described

below were carried out.

3.Description: ➀ Spacers were added to the hinges to raise the installation position height of the

permeation unit by 3 mm.

➁ The shapes of the OC mat and diffusion plate were altered.
➂ Clamps for 35 mm, 4 x 5 inch film were added.
➃ Packaging for accessories was added.
➄ Guide magnets were added to facilitate the attachment and detachment of the OC

mats.

➅ The length of the bolts which were affected by the additrion of the spacers.
➆ Slits have been added to the carriage units to mprove picture (screen) quality.

➅ LX-BZ7036XCZZ

Changed bolts
(length: 10 Ä 13 mm)

➄ PGIDZ7031XCZZ

➀ PSPAZ7061XCZZ

Added hinge spacer

R edge

Added guide magnets

➄ PSPAZ7060XCZZ

Added magnet spacer

➄ PMAGG7005XCZZ

Changed magnets (Width 14 → 10 mm)

SHARP CORPORATION Printer and Scanner Division

1/6

Orange

C

➁ Diffusion plate unit change

CPLTP7039XC01 (JX-32F6)
CPLTP7035XC01 (JX-32F12)

Accessories
(excluding the
OC mat)

Packaging tape

Groove (small)

➃ Added plastic bag

SSAKA2343QCZZ

➁ Changed OC Mat

PCUSU7013XCZZ

➃ Protector sheet A

(SPAK-7436XCZZ)

(a)

➂ F-clamp, 4 x 5, AS

(CCRA-7005XC01)

(b)

➃ Protector sheet C

(SPAK-7438XCZZ)

(b)

➂ F-clamp, 35 mm, AS

(CCRA-7007XC01)

➃ Accessory windows

(c)

(a)

➃ Protector sheet B

(SPAK-7437XCZZ)

(c)

➂ F-holder, AS

(CHLDZ7032XC01)

(SPAKF7439XCZZ)

2/6