Date: Nov. 12, 1993
COLOR IMAGE SCANNER : JX-325
No. : CX-145
1. CHANGE OF PANEL SHEET, ADDITION OF DIFFUSION
PLATE SHEET AND REGISTRATION CARD
2. PARTS CHANGES FOR EMI
1. Change of Panel Sheet, Addition of Diffusion Plate Sheet and Registration Card
1.Model name: JX-325
2.General: In compliance with the request from SEEG, panel sheet has been changed to the same
one as for the U.S. and diffusion plate sheet has been added as an accessory.
(Panel sheet)
vivid resolution of
vivid resolution of
300 dots per inch
300 dots per inch
High Resolution
High Resolution
Color Scanner
Color Scanner
POWER
POWER
READY
READY
ERROR
ERROR
POWER
POWER
READY
READY
ERROR
ERROR
(Before changes) HPNLH7019XCZZ
(After changes) HPNLH7020XCZZ
Glass frame
for originals
Reference position
Diffusion plate sheet
3.Effective time: July, 1993
SHARP CORPORATION Printer and Scanner Division
1/4
Orange
C
2. Parts Changes for EMI
1.Model name: JX325
2.General: The core has been changed for EMI, earth tapes(3pcs.) and cable holders (2pcs.) have
been added, and caution label on the cable has been eliminated.
Elimination of screw
Addition of cable holder
Change of core
Attached position of earth tape and caution in attaching
➀ Size of the earth tape attached in front of the upper cabinet has been changed from
140 X25 to 150X50 (PTPEZ7028XCZZ).
1
2
3
Sectional drawing
of upper cabinet
(front side)
Back of upper cabinet
Front side
(Note) When a glass frame for originals is
Panel side of upper cabinet
upper side drawing
attached, the earth tape should not
be seen.
50
Nitto NT-101
150
(PTPEZ7028XCZZ)
➁ To contact ➀ and lower cabinet securely, the earth tape 45X50 (PTPEZ7029XCZZ)
has been added to the front side of the lower cabinet.
2/4
(Note) When the upper cabinet is attached,
Earth tape
45X50
Nitto NT-101
1
3
2
Sectional drawing
of lower cabinet
the earth tape should not be seen.
Front side of low er cabinet
side drawing
(front side)
50
Inside plate
5
45
Nitto NT-101
(PTPEZ7029XCZZ)
Front side
➂ To reinforce connection with plate etc., two earth tapes 200X14 (PTPEZ7026XCZZ)
have been attached to the back of the upper cabinet.
Sectional drawing
of upper cabinet
Rubber
(backside)
PTPEZ7026XCZZ Nitto NT-101
Currently, though one piece of earth
tape has been attached, it is planned
200
14
that two pieces of the earth tapes will
be attached to make it thicker.
From October production, it is planned to change using more thicker earth tape.
3.Effective time: From the first lot : Core, Cable, holder Cable caution label (For Europe)
From August, 1993 : Earth tape (For Europe, Australia, United Kingdom)
From September, 1993 : Earth tape (For other countries)
From August, 1993 : Cable caution label (For United Kingdom, Australia,
Hong Kong)
3/4
Ref.
No.
Model
name
Version P/G No.
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
1 -12
1
2
specified ones for maintaining the safety and performance of the set.
Europe
JX-325
Europe
U.Kingdom
Hong Kong
Australia
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
1 — PSHEZ7130XCZA AH
14 — TCADN7019XCZZ AL Registration card ’93/7 6
1 -74 RCORF5002SCZZ RCORF7009XCZZ AR
1 -B20 XBPSD30P20KS0 — — Screw(3X20KS) 6
1 -23 — LHLDW2020SCZZ AB Cable holder 6
All
1
1
1
5 -16 TLABH7148XCZZ — — Caution lable ’93/8 6
HPNLH7019XCZZ HPNLH7020XCZZ AQ Panel sheet ’93/7 3
PTPEZ7025XCZZ PTPEZ7028XCZZ AL
— PTPEZ7029XCZZ AH
— PTPEZ7026XCZZ AE
!
Diffusion plate
sheet
Ferrite core
(TFCK-23-11-14)
Earth tape
(150x50)
Earth
tape(45x50)
No PN(CTU-1809)
Earth tape
(200x16)
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
’93/7 6
The
first
lot
’93/8 3
’93/8 6
’93/8 6
3
Q’ty:
2 to 4
Q’ty:
0 to 2
4/4
Loading...