Welcome to the SHARP Family . We are pleased that you are now the owner of a SHARP Color T elevision
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. W e have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
IMPORTANT
T o aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
Model No.:
Serial No.:
IMPORTANT INFORMATION
Energy efficiency is becoming increasingly important to consumers both in the US and in Canada. ENERGY
STAR is a US registered trademark to indicate that a product meets its guidelines for energy ef ficiency.
WHAT IS ENERGY STAR
TVs and VCRs use energy both when they are on and when they are off. North Americans spend more
than $1 billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY
STAR® models will reduce that energy “leakage” by up to 75 percent. Ultimately , this will mean more than
$500 million a year in energy savings for consumers.
The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution
that contributes to global warming. If every North American family replaced their TVs and VCRs with
ENERGY STAR® models, it would reduce carbon dioxide emissions by five million tons every year —
equivalent to eliminating the pollution from more than one million cars.
By using ENERGY ST AR® products, you will save money on your electric bills and use less energy. That
makes good economic sense and it’s good for our environment.
WARNING:
®
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
Before Operating Y our T elevision
Location
• For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULL Y INSERT.
Note:
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off
either the TV or the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
2
02-04 CR25S10[E].pm6531/5/01, 5:35 pm2
Before Operating Y our T elevision (Continued)
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND,
TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING
SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE
PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR
TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH
THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS
WHEN INSTALLING THE PRODUCT AND USE MOUNTING
ACCESSORIES RECOMMENDED BY THE MANUFACTURER.
A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH
CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES
MAY CAUSE THE PRODUCT AND CART COMBINATION TO
OVERTURN.
L Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
Pull up
Battery
Cover
• With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two
batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks inside the
compartment.
Supplied Accessories
TV
INPUT
DISPLAY
DVD
VCR
POWER
TV
Infrared Remote Control/Part Number
+
VOL
100
ENTER
0
1 2 3
4 5 6
7 8 9
PERSONAL PREFERENCE
FLASHBACK
CH/SKIP
DVD VCR
CATV
CH
CH
STOP REC
—
VOL
REW PLAY FF
MENUMUTE
PAUSE
A B C D
RRMCG1626CESA
TV • CATV• VCR • DVD
Size AA
Dry Batteries
Antenna Connections
Antennas
• The antenna requirements for good color television reception are more important than those for
black & white television reception. For this reason, a good quality outdoor antenna is strongly
recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
1. A 75 ohm system is generally a round cable with Ftype connector that can easily be attached to a
terminal without tools (not supplied).
2. A 300 ohm system is a flat “twin-lead” cable that
can be attached to a 75 ohm terminal through a
300-75 ohm ADAPTOR (not supplied).
02-04 CR25S10[E].pm6531/5/01, 5:36 pm3
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
F-type connector
3
Antenna Connections (Continued)
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the
TV set.
A. Combination VHF/UHF Antennas
VHF/UHF ANTENNA
300-ohm
twin-lead
REAR OF TV
VHF/UHF ANTENNA
or
75-ohm
coaxial cable
300/75-ohm
ADAPTOR
(Not supplied)
B. Separate VHF/UHF Antenna
VHF
ANTENNA
or
UHF
ANTENNA
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
COMBINER
(not supplied)
IN OUT
REAR OF TV
CABLE TV (CATV) CONNECTION
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber
by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
channel keys.
descrambler using the converter’s channel keys.
RF switch (not supplied)
Two-set
OUTAIN
B
OUT
IN
signal
splitter
(not
supplied)
Cable TV Line
Cable TV converter/
descrambler
(not supplied)
Note:
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that
might be required.
4
02-04 CR25S10[E].pm6531/5/01, 5:36 pm4
Quick Reference Control Operation
Quick Reference Control Operation
L Location of Controls(ENGLISH)
Front Panel
POWER.
Press → On.
Press again → Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
VIDEO/AUDIO IN2 TERMINALS
(VIDEO/AUDIO terminals are also
provided on the rear.
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• Press both at the same time to
access the MAIN MENU screen.
Basic Remote Control Functions
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
CATV/DVD-TV/VCR MODE SELECT
SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
See page
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote
control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
19.)
23.
POWER
TV
DVD
DISPLAY
VCR
123
456
789
FLASHBACK
PERSONAL PREFERENCE
ABCD
VOL
—
MENUMUTE
REW PLAYFF
PAUSE
0
CH
CH
CATVTV
DVDVCR
STOP REC
TV • CATV • VCR • DVD
ENTER
100
INPUT
VOL
+
CH/SKIP
Infrared Transmitter Window
DISPLAY
Press → Displays receiving channel for
four seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press → Switch to external video
INPUT 1 mode.
Press 2 times → Switch to external video
INPUT 2 mode.
Press 3 times → Switch back to the
original TV mode.
See page
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels,
when using the REMOTE KEYPAD
button. (See page 23)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages
channel presetting.
• Moves the “
screens.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
22.
16 ~ 18 for
” mark of the MENU
5
05-07 CR25S10[E].pm6531/5/01, 5:36 pm5
EZ SETUP during First Use
L When you turn on the TV for the first time, it will automatically
memorize the broadcast channels.
Please perform the following instructions before you press the
power button.
(1) Insert the batteries into the remote control. (See page 3)
(2) Connect the antenna cable to the TV set. (See page 3 ~
4)
(3) Plug in the AC POWER cord to the wall outlet.
POWER
TV
DVD
VCR
DISPLAY
INPUT
123
456
789
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
ABCD
CH
VOL
—
MENUMUTE
CH
VOL
+
CATVTV
POWER
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press the
POWER
button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
2 Press
CH UP (8)
or
DOWN (9)
(On the Set)
to select “ENGLISH”, “SPANISH
(Remote Control)
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
VOL (+)
or
(–)
Then press
3 Press
4 Press
VOL (+)
VOL (+)
or
.
(–)
to SET LANGUAGE.
CH
CH
to access EZ SETUP mode.
→
VOL—VOL
VOL—VOL
The tuner will automatically search for the
broadcast and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press
VOL (–)
and it will be cancelled.
If you want to SETUP again, please refer to page
15 on SETUP.
To cancel EZ SETUP
Press
VOL (–)
.
VOL
ENGL I SH
ESPAÑOL
FR NCA I S
A
SE ECT : CH8/ 9
L
SE:TL+–/
(SELECT LANGUAGE mode)
ENGL I SH
ESPAÑOL
FR NCA I S
+
+
A
SE ECT : CH8/ 9
L
SE:TL+–/
OR CA B L E .
TSARTSETUP?ZE
(EZ SETUP mode)
AU18TORGGAMMI NORP
+
LANGUAGSELECTE
VO
LANGUAGSEL ECTE
VO
ANTENNCONNE C TA
YE : VOL+
S
NO :
VOL –
WA I TPLE EAS
TSOP:
VOL –
5 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
Note:
• If EZ SETUP does not memorize all the channels in your region, please refer to page 16 for more
information on manually memorizing the channels using CHANNEL SETTING.
• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occuring around the area. Please refer to pages 16 ~ 18 for
more information on manually memorizing the channels using CHANNEL SETTING.
6
05-07 CR25S10[E].pm6531/5/01, 5:36 pm6
Demo Mode
MENU
button
(On the Set)
or
CHANNEL
UP (8)/
• To quickly learn more about the TV set, press and hold for more than
three seconds both
set. The TV set will go into DEMO mode and briefly explain the various
features.
• To cancel DEMO mode, again press both
DOWN (
99
9
)
on the TV set.
99
MENU
or
CH UP (
88
8
88
)
and
MENU
DOWN (
or
CH UP (
99
9
)
on the TV
99
88
8
)
and
88
DOWN (9)
Example:
DEMO mode display
oem
ndd
s
SHARP
uc
PMrio
SHARP
CForm
t
s
buttons
Accessing the MAIN MENU screen without Remote Control
• If you misplaced your Remote Control you can still access most settings
via the MAIN MENU screen when you press both
88
(
8
)
and
88
• Some features of your TV set will not be accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Service
Center for a replacement.
DOWN (
99
9
)
on the TV set.
99
MENU
or
CH UP
MENU
button
(On the Set)
or
CHANNEL
UP (8)/
DOWN (9)
buttons
05-07 CR25S10[E].pm6531/5/01, 5:36 pm7
7
FR NCAI S
ENGL I SH
ESPAÑOL
LANGUAGE
A
SL EP T IMERE
120 RE A IMN
BL E SCREENU
PE SONAL PREF .R
UN V ERS A L P LU SI
LANGUAGE
INGCH SET T
Language
L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
L Setting the ON SCREEN DISPLAY Language.
1 Press
2 Press
3 Press
4 Press
5 Press
MENU
CH UP (8)
VOL (+)
or
DOWN (9)
VOL (+)
CH UP (8)
to access MAIN MENU screen.
or
DOWN (9)
or
(–)
to access SET UP mode, then press
to move the “ ” mark to “LANGUAGE”.
or
(–)
to access LANGUAGE change mode.
or
DOWN (9)
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
to move the “ ” mark to “SET UP”.
CH
CH
CH UP (8)
VOL—VOL
+
→
VOL—VOL
CH
CH
+
to select “ENGLISH”, “SPANISH
CH
CH
SL EP T IMERE
VI DEO ADJUST
ELECTAUD I O S
CAPT I ONCLOSED
CONT RO LPARENT
ENERGY SAVE
SET UP
(MAIN MENU screen)
SL EP T IMERE
VI DEO ADJUST
ELECTAUD I O S
CAPT I ONCLOSED
CONT RO LPARENT
ENERGY SAVE
SET UP
(SET UP mode)
(LANGUAGE change mode)
IDIOMA
ENGL I SH
ESPAÑOL
FR NCAI S
A
6 Press
MENU
to exit.
Sleep Timer
L You can preset your television to turn off automatically in increments of 30, 60, 90 or 120 minutes.
1 Press
2 Press
3 Press
4 Press
Note:
•
• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
08-10 CR25S10[E].pm6531/5/01, 5:36 pm8
MENU
to access MAIN MENU screen.
VOL (+)
or
(–)
to access SLEEP TIMER mode.
→
VOL—VOL
+
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
SET UP
(MAIN MENU screen)
VOL (+)
MENU
or
(–)
to set a sleep time of 30, 60, 90 or 120 minutes.
to exit.
VOL—VOL
+
→
(TIMER SET mode)
To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN” during step 3.
intervals or when the remote’s Display key is pressed.
8
SL EP T IMERE
V IDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONT ROLPARENT
ENERGY SAVE
Video Adjust
ICTUR
E
–+
P50ICTUR
E
–+
P
50
Description of Adjustment Items
SelectedVOL UP (+) buttonVOL DOWN (–) button
item
PICTURETo increase contrastTo decrease contrast
TINTTo make skin tones greenishTo make skin tones purplish
COLORTo increase color intensityTo decrease color intensity
BRIGHTTo increase brightnessTo decrease brightness
SHARPTo increase sharpnessTo decrease sharpness
FAVORITETo choose a RED, BLUE or STANDARD COLOR TONE.
COLOR
RESETTo return all adjustments to factory preset levels.
1 Press
2 Press
MENU
to access MAIN MENU screen.
CH UP (8)
or
DOWN (9)
to move the “ ” mark to “VIDEO
ADJUST”.
→
3 Press
VOL (+)
or
(–)
to access PICTURE adjust mode.
CH
CH
VOL—VOL
POWER
TV
DVD
VCR
12 3
45 6
78 9
FLASHBACK
0
PERSONAL PREFERENCE
ABCD
CH
VOL
—
CH
MENUMUTE
(MAIN MENU screen)
+
(PICTURE adjust mode)
DISPLAY
ENTER
CATVTV
DVDVCR
INPUT
VOLUME
(+)/(–)
100
CHANNEL
VOL
+
UP (8)/
DOWN (9)
MENU
4 Press
CH UP (8)
or
DOWN (9)
to select the desired mode.
(Refer to the diagram below.)
PICTURE
RESET
: CH UP (8)
5 Press
VOL (+)
TINT
FAVORITE COLOR
or
(–)
to adjust the setting.
COLOR
: CH DOWN (9)
6 Repeat steps 4 to 5 to adjust other settings.
7 Press
08-10 CR25S10[E].pm6531/5/01, 5:36 pm9
MENU
to exit.
BRIGHT
SHARP
CH
CH
VOL—VOL
+
VOL UP (+)
increase contrast
VOL DOWN (–)
decrease contrast
9
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
Audio Select
L MTS (Multichannel TV Sound)
This circuit allows reception of stereo or bilingual TV sound.
1 Press
2 Press
MENU
to access MAIN MENU screen.
CH UP (8)
or
DOWN (9)
to move the “ ” mark to “AUDIO
SELECT”.
→
3 Press
4 Press
5 Press
Ex:
VOL (+)
VOL (+)
or
(–)
to access AUDIO SELECT mode.
or
(–)
to select “STEREO”, “SAP” or “MONO”.
STEREO SAP MONO
MENU
to exit.
Actual screen indicating ON AIR when receiving STEREO broadcasts.
Actual channel number
“← ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
CH
CH
VOL—VOL
VOL—VOL
(MAIN MENU screen)
+
AUD I O
+
(AUDIO SELECT mode)
REO
TIRON A
SSAE
P
MO O
N
(Channel call on screen)
SELECT
: SAPMTS
ON A
12
IR
L You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
• Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound.
• SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
L If stereo sound is difficult to hear.
• You can obtain clearer sound by manually switching to fixed monaural mode.
Note:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while in the INPUT mode does not change the type of sound; in this case, sound is
determined by the video source.
10
08-10 CR25S10[E].pm6531/5/01, 5:36 pm10
CAPT I ONCLOSED
MODE:CAP
DATA: CH 1
TION
CAPT I ONCLOSED
MODE:CAP
DATA: CH 1
TION
CAPT I ONCLOSED
MODE:CAP
DATA: CH 1
TION
Closed Caption
L HOW TO SET CLOSED CAPTION
• Y our TV is equipped with an internal Closed Caption decoder . “Closed
Caption” is a system which allows you to view conversations, narration,
and sound effects in TV programs and home videos as subscript on
your TV screen as shown on the right.
• Not all the programs and videos will offer closed caption. Please look
for the “” symbol to ensure that captions will be shown.
• Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT . For each mode, two channels are available, CH1 and CH2:
The [CAPTION] mode subscripts dialogues and commentaries of TV
dramas and news programs while allowing clear view of the picture.
The [TEXT] mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
4 5 6
7 8 9
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
ABCD
CH
VOL
—
CH
MENUMUTE
CATV TV
DVD VCR
VOL
+
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press
2 Press
MENU
CH UP (8)
CAPTION”.
3 Press
4 Press
VOL (+)
CH UP (8)
“MODE” or “DATA”.
5 Press
VOL (+)
MODE :
6 Press
MENU
to access MAIN MENU screen.
or
or
or
CAPTION
TEXT
OFF
DOWN (9)
(–)
to access CLOSED CAPTION setting mode.
or
DOWN (9)
(–)
to change the CLOSED CAPTION setting.
to move the “ ” mark to “CLOSED
to move the “ ” mark to either
DATA :
CH 1
CH 2
to exit.
→
VOL—VOL
VOL—VOL
SL EP T IMERE
VIDEO ADJUST
CH
CH
ENERGY SAVE
SET UP
ELECTAUD I O S
CAPT I ONCLOSED
CONTROLPARENT
(MAIN MENU screen)
+
(CLOSED CAPTION setting mode)
CH
CH
+
Note:
• If a broadcast has CLOSED CAPTION and the
mode automatically. Pressing
MUTE
again will return the set to its previous condition.
MUTE
button is pressed, the set enters [CAPTION]
• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your TV .
• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
• When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen
may become dark and blank. Should this occur, set the Closed Caption mode to “OFF”.
11-14 CR25S10[E].pm6531/5/01, 5:36 pm11
11
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
Parent Control (VIEW TIMER)
L VIEW TIMER
This function allows you to restrict TV viewing time and also allows you to control TV usage.
This function is to prevent your children from watching too much TV.
VIEWING TIME (an accumulative timer: counts only the time
duration acquired while the TV is on.)
• VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10
hours) in 30 minutes intervals.
OFF TIME (Restricts TV watching after the VIEWING TIME reaches
zero.)
• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)
in 30 minutes intervals.
STATUS (ON/OFF setting of VIEW TIMER)
L How to set VIEW TIMER.
1 Press
2 Press
MENU
to access MAIN MENU screen.
CH UP (8)
or
DOWN (9)
to move the “ ” mark to “PARENT
CONTROL”.
→
CH
CH
VEWT
IIMER
VEWINGITIME
––H
––M
TIME
OFF
––H ––M
STATU
S:OFF
(MAIN MENU screen)
3 Press
4 Press
5 Press
VOL (+)
VOL (+)
or
or
CH UP (8)
(–)
to access PARENT CONTROL mode.
(–)
to access “VIEW TIMER”.
or
DOWN (9)
to select “VIEWING TIME” and
“OFF TIME”. For each selection, press the
the time duration.
6 Press
VOL (+)
CH UP (8)
or
or
(–)
DOWN (9)
to turn ON the “VIEWING TIMER”. (If STATUS is
to select “STATUS”. Press the
OFF, VIEW TIMER will not operate)
7 Press
MENU
. “INPUT SECRET No.” will be displayed.
VOL (+)
CH
CH
CH
CH
→
→
or
VOL—VOL
VOL—VOL
(–)
to set
VOL—VOL
VOL—VOL
PAR ENT CONTROL
VIE
W
TIMER
+
(PARENT CONTROL mode)
VIWTIMER
E
W
ITIME
EGN
VI
+
+
+
OFF TIME
ST TAUS
VEWT
IIMER
VEWINGITIME
2H
TIME
OFF
––H ––M
STATU
S:OFF
VEWT
IIMER
VEWINGITIME
2H
TIME
OFF
5H 00M
STATU
S:ON
NI PUT SECRET No.
–
– – –
––––H
––––H
:OFF
00M
00M
M
M
12
11-14 CR25S10[E].pm6531/5/01, 5:37 pm12
Parent Control (VIEW TIMER Continued)
8 Enter the 4-digit SECRET No. using the
9
Press
MENU
, and SECRET No. is registered.
REMOTE KEYPAD
12 3
45 6
78 9
ENTER
0
100
.
→
Example
• To restrict anybody from watching the TV for 5 hours, after watching the
TV for 2 hours, your settings would look like this:
• They can choose to watch the 2 hours of TV however they wish. For
example, they could watch 1 hour of TV, turn TV off for 30 minutes, then
turn TV on and watch the remaining 1 hour on the VIEWING TIMER.
L How to change the VIEW TIMER settings. (SECRET No. is registered)
1 Repeat “How to set VIEW TIMER” steps and select
“PARENT CONTROL VIEW TIMER” during step 3.
Press
VOL (+)
or
(–)
, and “INPUT SECRET No.” will
be displayed.
2 Enter the 4-digit SECRET No. using the
KEYPAD
, and the VIEW TIMER access screen will
REMOTE
be displayed. Repeat step 5 ~ 6.
Note:
• When you choose the correct SECRET No., the VIEW TIMER access
screen is displayed. If the wrong SECRET No. is chosen, “SECRET No.
IS INCORRECT” is displayed. Input the SECRET No. again in this case.
VOL—VOL
12 3
45 6
78 9
0
+
ENTER
100
NI PUT SECRET No .
1
2 3 4
VEWT
IIMER
VEWINGITIME
2H
00M
TIME
OFF
5H 0 0M
STATU
S:ON
NI PUT SECRET No .
–
– – –
I PUT ESNCRET No .
****
S ECRET N o. I S
INC
O
RRECT
L How to cancel the VIEW TIMER (While the TV set is OFF but the
VIEW TIMER is set)
1 Turn on TV; a blue screen message “TIME OVER” will appear. If you
do nothing, the TV will turn off in approximately 30 seconds.
2 Enter the 4-digit SECRET No. using the
KEYPAD
the VIEW TIMER is canceled. If the wrong SECRET
No. is chosen, “SECRET No. IS INCORRECT” is
displayed. Input the SECRET No. again in this case.
L To cancel the VIEW TIMER setting or change the SECRET No. (When
you forget the SECRET No.)
. When you choose the correct SECRET No.,
1 Repeat “How to set VIEW TIMER” steps and select
“PARENT CONTROL VIEW TIMER” during step 3.
VOL (+)
Press
be displayed.
11-14 CR25S10[E].pm651/6/01, 10:14 AM13
or
(–)
, and “INPUT SECRET No.” will
REMOTE
12 3
45 6
78 9
0
VOL—VOL
+
ENTER
100
TMEO
IVER
I PUT ESNCRET
–––
–
TMEOIVER
I PUT ESNCRET
****
NI PUT SECRET No .
–
– – –
No .
No .
13
4 56
Parent Control (VIEW TIMER Continued)
2 Press and hold both
simultaneously until the VIEW TIMER access screen is displayed.
Now you can cancel the VIEW TIMER settings or change the
SECRET No. while “INPUT SECRET No.” is displayed.
VOL (+)
and
CH UP (8)
on the TV set
(On the Set)
L Notice of Remaining VIEWING TIME
• For every 30 minute interval, the “remaining time” will be displayed
for 4 seconds. For the last 5 minutes, the “remaining time” will be
displayed every minute.
•“0 REMAIN” will be displayed for 10 seconds just before the VIEWING
TIME is complete.
Energy Save
L This feature lets you lower the power consumption of your TV
set which in turn saves you money and minimizes the impact on
the environment. When this feature is turned on, it reduces the
brightness of the TV to a level that consumes approximately 20
percent less energy than when the feature is turned off.
The reduction in brightness will be less noticeable under low
room lighting conditions.
1 Press MENU to access MAIN MENU screen.
2 Press
CH UP (8)
“ENERGY SAVE”.
or
DOWN (9)
to move the “ ” mark to
CH
→
CH
VOL (+) /
VIEWING TIME
7 89
FLASHBACK
PERSONAL PREFERENCE
ABCD
VOL
—
MENUMUTE
SL EP T IMERE
V I DEO ADJ UST
AUD I O
PAR ENT CONTROL
ENERGY S AVE
SET UP
UP
(8) buttons
VIEWING TIME
0H
VIEWING TIME
0H
05M
0
ENTER
0
100
CH
VOL
+
CH
CATVTV
SELECT
CHANNEL
30M
REMAIN
REMAIN
REMAIN
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
CAPT I ONCLOSED
(MAIN MENU screen)
3 Press
4 Press
5 Press
VOL (+)
VOL (+)
MENU
or
(–)
to access ENERGY SAVE select mode.
or
(–)
to select “ON”.
to exit.
14
11-14 CR25S10[E].pm6531/5/01, 5:37 pm14
VOL—VOL
VOL—VOL
EN REGYSAVE
+
:OFF
(ENERGY SAVE select mode)
EN REGYSAVE
+
:ON
BL E SCREENU
LANGUAGE
INGCH SE T T
PE SONAL PREF .R
UN VER SA L P L USI
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
Set Up
L EZ SETUP
By operating the channel preset functions, you can preset your
TV to the desired channels for viewing.
12 3
45 6
78 9
ENTER
FLASHBACK
0
PERSONAL PREFERENCE
A BC D
CH
VOL
—
CH
MENUMUTE
REMOTE
KEYPAD
VOLUME
100
(+)/(–)
CHANNEL
VOL
+
UP (8)/
DOWN (9)
MENU
1 Press
2 Press
MENU
to access MAIN MENU screen.
CH UP (8)
or
DOWN (9)
to move the “ ” mark to “SET
UP”.
3 Press
4 Press
5 Press
6 Press
8
(
VOL (+)
)
or
DOWN (9)
VOL (+)
VOL (+)
VOL (+)
or
(–)
to access SET UP mode, then press
to move the “ ” mark to “CH SETTING”.
or
(–)
to access CH SETTING mode.
or
(–)
to access EZ SETUP mode.
.
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press
VOL (–)
. Search will be
canceled.
To cancel EZ SETUP
Press
VOL (–)
.
VOL—VOL
CH
→
CH
(MAIN MENU screen)
CH UP
CH
→
+
CH
VOL—VOL
VOL—VOL
VOL
(SET UP mode)
EZ
SETUP
AI /CABLER
CH SE ARCH
CH MEMORY
+
(CH SETTING mode)
OR CA B L E .
TSARTSETUP?ZE
+
ANTENNCON NE CTA
YE : VOL+
S
NO :
VOL –
(EZ SETUP mode)
+
AU18TORGGAMM I NORP
WA I TPLE EAS
TSOP:
VOL –
7 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
15
15-16 CR25S10[E].pm6531/5/01, 5:37 pm15
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
Set Up (Continued)
L CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 Press
2 Press
UP”.
MENU
to access MAIN MENU screen.
CH UP (8)
or
DOWN (9)
to move the “ ” mark to “SET
CH
→
CH
(MAIN MENU screen)
3 Press
4 Press
VOL (+)
CH UP (8)
SETTING”.
5 Press
6 Press
VOL (+)
CH UP (
CABLE”, then press
7 Press
CH UP (
desired mode.
CABLE STD
AIR
or
(–)
to access SET UP mode.
or
DOWN (9)
or
(–)
to access CH SETTING mode.
8
) or
DOWN (
VOL (+)
8
) or
DOWN (9)
to move the “ ” mark to “CH
9
) to move the “ ” mark to “AIR/
or
(–)
to access AIR/CABLE mode.
to move the “ ” mark to the
CABLE HRCCABLE IRC
VOL—VOL
CH
CH
BL ENSCREE
U
PE SONAL PREF .R
UN VER SA L P L USI
LA
+
CH
CH
→
NGUAGE
CH SE T T I NG
(SET UP mode)
EZ
SETUP
AI /CABLER
CH SE ARCH
CH MEMORY
VOL—VOL
+
(CH SETTING mode)
EZ SETUP
AI /CABLER
H SEARCH
C
HMEMORYC
VOL—VOL
→
+
AI /CABLER
AI
R
ABLE STD
CH
CH
C
ABLE HRCC
ABLE I RCC
(AIR/CABLE mode)
8 Press
MENU
to exit.
Note:
• Receivable channels of your TV set are:
AIR channels:CABLE channels:
VHF: 2 through 13.1 (HRC and IRC mode only)
UHF: 14 through 69.2 through 125 (STD, HRC and IRC)
16
15-16 CR25S10[E].pm6531/5/01, 5:37 pm16
CH
CH
Set Up (Continued)
LSaving broadcast TV channels into memory.
1.1 Press
1.2 Press
1.3 Press
1.4 Press
MENU
screen, then press
(
9
)
to move the “ ” mark to “SET UP”.
VOL (+)
mode, then press
9
)
to move the “ ” mark to “CH
(
to access MAIN MENU
CH UP (8)
or
(–)
to access SET UP
CH UP (8)
or
or
SETTING”.
VOL (+)
or
(–)
to access CH
SETTING screen.
CH UP (8)
the “
” mark to “CH SEARCH”, then press
VOL (+)
or
or
DOWN (9)
(–)
to access CH SEARCH
screen.
DOWN
DOWN
to move
VOL—VOL
VOL—VOL
CH
CH
+
+
→
→
→
VOL—VOL
CH
CH
CH
CH
EZ
EZ
SETUP
SETUP
AI /CABLER
AI /CABLER
CH SE ARCH
CH SE ARCH
CH MEMORY
CH MEMORY
(CH SETTING mode)
+
START
2.1 Press
VOL (+)
. The tuner will search
through all available channels in your area
and add them into the TV’s memory.
STOP
2.2 Press
VOL (–)
. CH SEARCH will stop at
the current channel and will not add any
(STOP)
VOL
(START)
VOL
+
—
CH SE ARCH
CH SE ARCH
AIR
AIR
2
1
2
1
AR +T:
ST
AR +T:
ST
TO–P:
S
TO–P:
S
(CH SEARCH mode)
higher channels.
2.3 Press
MENU
to exit.
Note:
• If you press
VOL (+)
again while in the CH SEARCH mode, autoprogram will start again, and the previously memorized channels will
be lost.
LAdding weak or additional channels or erasing unwanted channels from TV memory.
1.1 Press
1.2 Press
1.3 Press
MENU
screen, then press
9
)
to move the “ ” mark to “SET UP”.
(
VOL (+)
mode, then press
9
)
to move the “ ” mark to “CH
(
to access MAIN MENU
CH UP (8)
or
(–)
to access SET UP
CH UP (8)
or
or
SETTING”.
VOL (+)
SETTING mode, then press
DOWN (9)
or
(–)
to access CH
CH UP (8)
to move the “ ” mark to “CH
DOWN
DOWN
or
VOL—VOL
VOL—VOL
CH
→
CH
→
→
CH
CH
CH
CH
+
+
EZ
EZ
SETUP
SETUP
AI /CABLER
AI /CABLER
CH SE ARCH
CH SE ARCH
CH MEMORY
CH MEMORY
(CH SETTING mode)
MEMORY”.
2.1 Press
VOL (+)
MEMORY.
or
(–)
to access CH
VOL—VOL
+
2.2 Use
2.3 Press
CH UP (8)
KEYPAD
or
to select each desired channel
to add or erase.
VOL (+)
to add a channel to the TV’s
memory or press
DOWN (9)
VOL (–)
or
REMOTE
to erase a
VOL—VOL
or
+
12 3
45 6
78 9
0
ENTER
100
channel from the TV’s memory.
17
17-18 CR25S10[E].pm6531/5/01, 5:37 pm17
LANG GEUA
BL ENSCREEU
CH SE T T I NG
PE SONAL PREF .R
UN VER SA L P L USI
:OFF
BL EUSCREEN
:ON
BL EUSCREEN
Set Up (Continued)
2.4 Press
MENU
to exit.
VOL (+)
HMEMORY
C
AIR
2
1
D+:
ADTO
(CH MEMORY
unmemorized channel)
To add channel 12 to
the TV memory
VOL (–)
To erase channel 12 from
the TV memory
CH MEMORY
21
AIR
ESTOAR
(CH MEMORY
memorized channel)
L BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not
received.
1 Press
2 Press
MENU
to access MAIN MENU screen.
CH UP (8)
or
DOWN (9)
to move the “ ” mark to “SET
UP”.
→
3 Press
4 Press
VOL (+)
VOL (+)
or
(–)
to access SET UP mode.
or
(–)
to access BLUE SCREEN select mode.
E –:
CH
CH
VOL—VOL
POWER
TV
DVD
VCR
DISPLAY
INPUT
12 3
45 6
78 9
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
ABCD
CH
VOL
—
CH
MENUMUTE
CATVTV
DVDVCR
SL EP T IMERE
VIDEO ADJUST
ENERGY SAVE
SET UP
VOLUME
(+)/(–)
CHANNEL
VOL
+
UP (8)/
DOWN (9)
MENU
ELECTAUD I O S
CAPT I ONCLOSED
CONTROLPARENT
(MAIN MENU screen)
+
(SET UP mode)
VOL—VOL
+
(BLUE SCREEN select mode)
5 Press
6 Press
VOL (+)
MENU
or
(–)
to exit.
to select “ON”.
VOL—VOL
+
Note:
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
• While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the
BLUE SCREEN is turned on.
18
17-18 CR25S10[E].pm6531/5/01, 5:37 pm18
Set Up (Continued)
L PERSONAL PREFERENCE
By setting the PERSONAL PREFERENCE channels in advance,
you can select your favorite channels easily.
1 Press
2 Press
MENU
to access MAIN MENU screen.
CH UP (8)
or
DOWN (9)
to move the “ ” mark to “SET
UP”.
→
3 Press
4 Press
VOL (+)
8
)
or
(
or
(–)
DOWN (9)
to access SET UP mode, then press
to move the “” mark to “PERSONAL
PREFERENCE”.
VOL (+)
VOL—VOL
or
(–)
to select PERSONAL PREFERENCE select
→
+
mode in which you can program 4 favorite channels, in 4 different
categories. (total of 16 channels)
VCR or DVD input mode will be selected automatically by pressing
the VCR or DVD PLAY buttons on the UNIVERSAL REMOTE
CONTROL.
1 Press
2 Press
MENU
to access MAIN MENU screen.
CH UP (8)
or
DOWN (9)
to move the “ ” mark to “SET
UP”.
→
3 Press
4 Press
VOL (+) or (–)
CH UP (8)
“UNIVERSAL PLUS”.
to access SET UP mode.
or
DOWN (9)
to move the “ ” mark to
CH
CH
VOL—VOL
CH
CH
ENTER
100
VOL
+
ELECTAUD I O S
CAPT I ONCLOSED
CONTROLPARENT
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
78 9
FLASHBACK
0
PERSONAL PREFERENCE
ABCD
CH
VOL
—
CH
MENUMUTE
CATVTV
DVDVCR
SL EP T IMERE
VIDEO ADJUST
ENERGY SAVE
SET UP
(MAIN MENU screen)
+
(SET UP mode)
BL E SCREENU
PE SRNOALP F.ER
UN VERSAL P LUSI
LA
GUAGEN
CH SE T T I NG
5 Press
VOL (+) or (–)
to access UNIVERSAL PLUS to select VCR
or DVD mode.
6 Press
press
CH UP (8)
or
VOL (+) or (–)
DOWN (9)
to select “CH3, CH4”, “INPUT 1”, “INPUT 2”
or “OFF”.
CH3CH4INPUT 1INPUT 2OFF
Set model to the input in which your
VCR or DVD is connected to. If done
through RF, select either channel 3 or
4 to match the setting of the VCR or
DVD.
7 Press
MENU
to exit.
20
19-20 CR25S10[E].pm6531/5/01, 5:37 pm20
VOL—VOL
+
to select the VCR or DVD, and
CH
CH
→
VOL—VOL
+
UN VI ERS AL PL US
:
OFF
VCR
:
:
OFF
DVD
:
(UNIVERSAL PLUS select mode)
UN VI ERS AL PL US
:
CH3
VCR
:
:
OFF
DVD
:
Using the Video and Audio Input Jacks
L Connecting video equipment for playback of video material.
• When the television is connected to video equipment as shown below, the material being played
back on the video equipment can be seen on the television screen.
Connecting video device equipped with video output terminal.
CONNECTIONS
VIDEO EQUIPMENT
(Front connection
terminals of TV)
To VIDEO
OUTPUT
CAMCORDER
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
FWDREV
TV GAME
VCR
DVD
(Rear connection
terminals of TV)
To VIDEO OUTPUT
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
21
21-22 CR25S10[E].pm6531/5/01, 5:38 pm21
Using the Video and Audio Input Jacks (Continued)
L To watch video material playback.
• Press the Remote’s
wish to playback is connected.
• The external VIDEO INPUT mode will change as follows each time the
AIR
or
CABLE
INPUT 1
(IN-1)
Rear
INPUT
button to select the VIDEO INPUT mode for the video equipment you
INPUT
is pressed.
INPUT 2
(IN-2)
Front
• INPUT mode can be selected by pressing either the
TV is set to the highest channel stored in memory , or by pressing the
CH UP (8)
on the TV remote control when the
CH DOWN (9)
when it is set to
the lowest channel.
Note:
• When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the
United States and that prior permission be obtained from copyright owners whenever necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
22
21-22 CR25S10[E].pm6531/5/01, 5:38 pm22
DVD/VCR POWER
Press to turn the VCR or DVD
on and off.
PLAY
Press to playback a tape or disc.
REWIND
Press to rewind a tape or
reverse disc.
For some VCRs or DVDs you
may need to press STOP first,
then REWIND.
PAUSE
Press to temporarily stop the
tape or disc during playback
or recording (VCR only).
Press again to release Pause.
STOP
Press to stop the tape or disc.
REMOTE KEYPAD
Use to enter two-digit code
numbers when identifying your
VCR.
ENTER
FF
Press to rapidly advance the
tape or disc. For some VCRs or
DVDs, you may need to press
STOP first, then FF.
VCR CHANNEL
UP ( )/ DOWN ( )
Press to scan up or down through
channels on the VCR.
RECORD
Press to begin recording.
(VCR only)
DVD SKIP
Press to jump forward to the
beginning of the next chapter/track,
or backward to the beginning of the
current chapter/track, and
automatically start to play that
chapter/track.
Operation of Remote Control
L Universal Remote Control
With the purchase of your television set you
also have received the latest innovation in
remote control technology. With its easy-touse push button keyboard, your Remote can
control your television set and most infrared
remote controlled VCRs, cable TV converters
and DVDs as well.
Note:
• Depending on the model year produced, brand
and type of VCR, cable TV converter and DVD,
some models may not be compatible with the
remote control.
• Some brands may not enable channel
selection until the ENTER is pressed.
Example:
When you select channel 24,
(1) Press REMOTE KEYPAD “2”.
(2) Press REMOTE KEYPAD “4”.
(3) Press ENTER.
For detailed information on the use of the
Cable TV converter Box refer to their operating
manuals.
L Using Your Remote With Your TV
After installing the batteries, set the
DVD-TV/VCR
on the remote to the TV position.
CATV/
(If you can change the channel of the TV by
pressing
CH UP
(8) or
DOWN
(9) on the
Remote Control, it is the TV position.)
L “Identifying” Remote VCRs, cable TV
conveters and DVDs
Your Remote Control has been set at the
factory to operate your TV and many remote
control VCRs, cable TV converters and DVDs.
However, in some cases an easy one-time setup step may be necessary before the Remote
will operate accessory VCRs, cable TV
converters and DVDs.
• In this set-up step, the Remote locates and
memorizes the remote control transmitter code
for the VCR, cable TV converters and DVDs.
• Once “identified”, the Remote sends the proper
remote signals to operate your accessory.
• This identify step will not have to be repeated
until power to the Remote is interrupted due
to a battery failure.
L USING YOUR REMOTE CONTROL WITH A
VCR AND DVD
Once you make certain the Remote Control
has “identified” your remote controlled VCR
or DVD, the Remote Control is ready to
operate your unit. The various VCR or DVD
function buttons on the Remote Control will
not operate your VCR or DVD if those features
are not already found on your unit.
• For detailed information on the use of the VCR
or DVD, refer to the operation manual of the
VCR or DVD.
23-27 CR25S10[E].pm6531/5/01, 5:38 pm23
POWER
TV
DVD
DISPLAY
INPUT
VCR
123
456
789
0
CH
CH
STOP REC
ENTER
100
VOL
+
CATVTV
DVDVCR
CH/SKIP
FLASHBACK
PERSONAL PREFERENCE
ABCD
VOL
—
MENUMUTE
REW PLAYFF
PAUSE
TV • CATV • VCR • DVD
23
Operation of Remote Control (Continued)
POWER
TV
POWER
REMOTE
KEYPAD
TV
FLASHBACK
PERSONAL PREFERENCE
ABCD
VOL
—
MENUMUTE
REW PLAYFF
PAUSE
L HOW TO IDENTIFY A VCR
The remote control may already be set to
operate your VCR. Try this initial check before
going on to the following “identify” section.
(1) Slide
(2) Point remote towards VCR and press
CATV/DVD-TV/VCR
VCR POWER
switch to VCR.
DVD/
.
(3) Does the remote turn the VCR ON and OFF?
• If yes, the remote is ready to operate the VCR
and no further steps are needed.
• If no, continue to the “identify” section.
L To Identify Y our VCR – Direct Entry Method.
Use the following steps and list to quickly find
the remote control code for your accessory
VCR.
• First look up your VCR’s remote control code
number before going through the direct code
entry steps control.
• If this procedure does not identify your
accessory VCR, use the Search method of
identification (described in the next section).
(1) Slide
(2) Press and hold down
CATV/DVD-TV/VCR
(9)
on your remote control.
switch to VCR.
DISPLAY
and
CH DOWN
Then release both buttons.
(3) Within ten seconds after releasing
and
CH DOWN (9)
, enter your VCR’s two-
DISPLAY
digit remote control code number using
REMOTE KEYPAD
(refer to list).
• The remote control is now ready to send
commands to your VCR.
DVD
DISPLAY
VCR
123
456
789
0
CH
CH
CATVTV
DVDVCR
STOP REC
ENTER
100
CH/SKIP
VOL
INPUT
+
DVD/VCR
POWER
DISPLAY
CHANNEL
UP (8)/
DOWN (9)
CATV/DVD-TV/VCR
Some brands have more than one remote
code listed, due to changes in the remote
codes from early to later model years, or due
to format differences (VHS/BETA). In such
cases, you may have to try more than one code
to find the code your VCR accepts.
Note:
Depending on the model, year produced,
brand, and type of VCR, some models may
not be compatible with the remote control.
L To Identify Your VCR – Search Method.
(1) Slide
CATV/DVD-TV/VCR
switch on the
remote to VCR.
(2) Press POWER on the VCR to ON.
(3) Stand at least six feet away from the front of
the VCR.
Point the remote towards the VCR.
Hold down
DISPLAY
and
CH UP (8)
same time. KEEP HOLDING THE BUTTONS
DOWN.
(4) Watch the Channel Number indicator on the
VCR, Channel numbers will scan up when the
VCR has been identified.
Release
DISPLAY
and
CH UP (8)
as the channel numbers start to scan up.
The VCR’s remote control code number has
been identified, and the remote is ready to
operate the VCR.
at the
as soon
24
23-27 CR25S10[E].pm6531/5/01, 5:38 pm24
Operation of Remote Control (Continued)
POWER
TV
DVD
DISPLAY
0
CH
CH
INPUT
ENTER
100
VOL
+
CATVTV
DVDVCR
CH/SKIP
DISPLAY
REMOTE
KEYPAD
CHANNEL
UP (8)/
DOWN (9)
CATV/DVDTV/VCR
TV
POWER
VCR
123
456
789
FLASHBACK
PERSONAL PREFERENCE
ABCD
VOL
—
MENUMUTE
REW PLAYFF
PAUSE
STOP REC
TIPS ON IDENTIFYING YOUR VCR:
If your VCR model does not have the CHANNEL
UP function on its remote control, it cannot be
identified using the SEARCH method for identifying.
For such models, please try the DIRECT ENTRY
method of identifying.
Be Patient: a minute or two can seem a lot longer
when you’re waiting for something to happen, but
the code should be identified within 2 minutes.
Remember, it is only a one-time set-up.
Be careful not to let the VCR scan more than five
channels when the indicator starts to move up. If
you continue holding down the
UP (8)
after five channel scans, the proper remote
DISPLAY
and
CH
code can be passed up, and the two minutes identify
cycle will have to be repeated.
If a channel change does not occur on the VCR
within two minutes, read the identifying instructions
again and repeat the steps. Should a channel
change still not occur the remote will not operate
with the desired VCR.
VCR BRAND
Akai
Audio Dynamics
Broksonic
Canon
Capehart
Craig
Curtis Mathis
Daewoo
DBX
Dynatech
Emerson
Fisher
Funai
GE
Goldstar
Hitachi
Instant Replay
JC Penney
JVC
Kenwood
Lloyds
Magnavox
Magnin
Marantz
Memorex
Minolta
Mitsubishi
Montgomery Ward
Multitech
NEC
Panasonic
Pentax
Philco
Philips
Quasar
RCA
Realistic
Samsung
Sanyo
Scott
Sears
Sharp
Shintom
Sony
Sound Design
Sylvania
Symphonic
Tatung
Teac
Teknika
Thomas
TMK
Toshiba
Video Concepts
Yamaha
Zenith
Depending on the model, year produced,
brand, and type of DVD, some models may
not be compatible with the remote control.
26
23-27 CR25S10[E].pm6531/5/01, 5:38 pm26
Operation of Remote Control (Continued)
L HOW TO IDENTIFY A CABLE CONVERTER
L To Identify Your Cable Converter –Direct
Entry Method.
Use the following steps and list to quickly find
the remote control code for your cable TV
converter.
• First look up your converter’s remote code
number before going through the direct code
entry steps below.
• If this procedure does not identify your
converter, use the Search method for
identification.
(1) Slide
(2) Press and hold down
CATV /DVD-TV/VCR
(9)
on your remote control.
switch to CATV.
DISPLAY
and
CH DOWN
Then release both buttons.
(3) Within ten seconds after releasing
and
CH DOWN (9)
, enter your converter’s
two-digit code number using
KEYPAD
(refer to list).
DISPLAY
REMOTE
• The remote control is now ready to send
commands to your converter.
• Some brands have more than one remote
code listed due to changes in the remote codes
from early to later model years. In such cases,
you may have to try more than one code to
find the code your converter accepts.
Note:
Depending on the model, year produced,
brand, and type of CATV converter, some
models may not be compatible with the remote
control.
L T o Identify Your Cable Converter – Search
Method.
(1) Slide
CA TV /DVD-TV/VCR
switch to CATV.
(2) Press the POWER button on the cable
converter to ON.
(3) Stand at least six feet away from the converter.
Point the remote towards the converter.
Hold down the
DISPLAY
and
CH UP (8)
at
the same time. KEEP HOLDING THE
BUTTONS DOWN.
(4) Watch the Channel Number indicator on the
converter.
Channel numbers will scan up when the
converter has been identified.
Release the
DISPLAY
and
CH UP (8)
as soon
as the channel numbers start to scan up.
The converter’s remote control code number
has been identified, and the remote is ready
to operate the converter.
CATV CONVERTER
BRAND
Anvision
Cable Star
Eagle
General Instrument
Jerrold
Magnavox
Oak Sigma
Panasonic
Philips
Pioneer
Randtek
RCA
Scientific Atlanta
Sony
Viewstar
Be Patient: a minute or two can seem a lot
longer when you’re waiting for something to
happen, but the code should be identified
within 2 minutes. Remember, it is only a onetime set-up.
Be careful not to let the CATV converter scan
more than five channels when the indicator
starts to move up. If you continue holding down
the
DISPLAY
and
CH UP (8)
after five channel
scans, the proper remote code can be passed
up, and the two minute identify cycle will have
to be repeated.
If a channel change does not occur on the
cable converter within two minutes, read the
identifying instructions again and repeat the
steps. Should a channel change still not occur,
the remote will not operate with the desired
converter.
Note:
Some satellite receivers can be operated by
the REMOTE CONTROL. If you have a
Satellite Receiver, you can use the above
method to search for available channels.
23-27 CR25S10[E].pm6531/5/01, 5:38 pm27
27
Before Calling for Service
Check these items and see if you can correct the trouble with a slight adjustment of the controls.
’t Work
QUICK SERVICE
CHECK LIST
PROBLEM
No Playback of VCR and Disc
Player
No Picture or Sound from
External Video/Audio Products
Remote Control Doesn
Bars on Screen
Picture Distorted
Picture Rolls Vertically
No Color
Poor Reception on Some
Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in Picture
Picture Blurred
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Dark and Blank Picture
POSSIBLE REMEDY
Try a new channel, if OK, then
there is possible station trouble.
Is TV plugged in? Power at outlet?
Is TV’s POWER button on?
Is antenna connected to terminal on
the back of the set?
If outside antenna is being used,
check for broken wire.
Check for local interference or
external electrical noise.
Turn off with POWER button and
then turn it on after about a minute.
Adjust COLOR control.
Adjust PICTURE control.
Check external Video/Audio
products: look for loose/broken
connection leads. (Refer to page
21~ 22 )
Check batteries of Remote Control.
Change Closed Caption mode to
“OFF” / Energy Save mode to
“OFF”.
Unplug the TV and plug it in again
after two minutes or longer.
XXXXXXX X X XX XX XX XX
XXXXXXX X XXXXXXX XX
XX XX XXX X X XX XX XX XX
XXXXXXXXXX X X X X X XX
XXXXXXX X XXXXXX X XX
XXXX X X X XX XXX XXXX X
XX XX XXX X X XX XX XX XX
XXXXXXX X XXXXX XX X X
X X XXXXX X X XX XX XXX X
XXXX XXX X X XX XXXXXX
XXX X X X X X XXX XX XXX X
XX XXX XX X X XX XX XX XX
XXX XXXX X XXXXXXXX X X
External Electrical Noise
’s Operation
Interfering with TV
Color on Part of the Screen
Appears Distored
Note:
• When viewing in TEXT mode, if no TEXT broadcast is being received,
the screen may become dark and blank. Should this occur, set the
Closed Caption mode to “OFF”.
28
28-29 CR25S10[E].pm6531/5/01, 5:38 pm28
(Dark and Blank Picture)
Specifications
MODELCR25S10
Receiving SystemNTSC
Stereo BroadcastMTS/SAP
Reception Channels
AIRVHF2-13 ch
UHF14-69 ch
CATV1-125 ch
Channel Tuning181-channel Reception PLL tuning system
Antenna Input ImpedanceVHF/UHF 75 ohm Unbalanced
Screen Size25˝ Diagonally Measured
TerminalsAudio/Video input x 2 (Front x 1, Rear x 1)
Sound Output1.5 W (RMS) x 2
Power SourceAC 120 V, 60 Hz
Power Consumption103 W
Dimensions2445/64˝ (W) x 2211/64˝ (H) x 209/32˝ (D)
[626.5 mm (W) x 563.0 mm (H) x 514.5 mm (D)]
Weight (approx.)61.7 lbs. (28.0 kg)
• Design and specifications are subject to change without notice.
28-29 CR25S10[E].pm651/6/01, 10:43 AM29
29
VALID IN CANADA ONLY
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer
purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or
by an Authorized Sharp Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.
If any such defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or
replace the product as specified herein.
This warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or
inappropriate use as outlined in the owner’s manual.
(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized
Service Centers or Sharp’s Authorized Servicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not
limited to head cleaning tapes and chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product
including but not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters,
belts, ribbons, cables and paper.
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any damage caused by external or environmental conditions, including but no limited to transmission line/power line
voltage or liquid spillage.
(g) Any product received without appropriate model, serial number and CSA/CUL markings.
(h) Any products used for rental or commercial purposes.
(i) Any installation, setup and/or programming charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the
Sharp product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp
Service Center or an Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp’s discretion on
any Sharp television with the screen size of 27” or larger and on any Sharp Over The Range Microwave Oven.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service center or their agent or
employee is authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp
disclaims any and all liability for direct or indirect damages or losses or for any incidental, special or consequential damages
or loss of profits resulting from a defect in material or workmanship relating to the product, including damages for the loss of
time or use of this Sharp product or the loss of information. The purchaser will be responsible for any removal, reinstallation,
transportation and insurance costs incurred. Correction of defects, in the manner and period of time described herein, constitute
complete fulfillment of all obligations and responsibilities of Sharp to the purchaser with respect to the product and shall
constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
Colour Television1 year (picture tube 1 additional year)
LCD Projector1 year (bulb 90 days)
LCD TV1 year
Video Cassette Recorder1 year
Camcorder1 year
TV/VCR Combo1 year (picture tube 1 additional year)
Audio Products1 year
Microwave Oven2 years (magnetron 3 additional year for part only)
Vacuum Cleaner1 year
DVD Player1 year
WARRANTY PERIODS
To obtain the name and address of the nearest Authorized Sharp Service Center or Dealer, please contact:
SHARP ELECTRONICS OF CANADA LTD
335 Britannia Road East
Mississauga, Ontario
L4Z 1W9
(905) 568-7140 or 1-(877) SHARP-CC
Web-site : www.sharp.ca
SHARP ELECTRONICS OF CANADA LTD.
SHARP ELECTRONICS OF CANADA LTD.
335 BRITANNIA ROAD EAST, MISSISSAUGA, ONTARIO L4Z 1W9
SHARP CORPORATION
30
30 CR25S10[E].pm651/6/01, 10:18 AM30
Printed in Mexico
TINS-7299GJZZ
01P07-MMP
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.