ENGLISH
ENGLISH
MODEL
XL-E1H
XL-UH05H
MICRO COMPONENT SYSTEM
OPERATION MANUAL
XL-E1H Micro Component System consisting of XL-E1H (main unit) and CP-E1H (speaker system).
XL-UH05H Micro Component System consisting of XL-UH05H (main unit) and CP-UH05H (speaker system).
Accessory
Remote control x 1
Please conrm that only the following accessory is
included..
Special note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
Volume control
The sound level at a given volume setting depends on
speaker efciency, location and various other factors.
It is advisable to avoid exposure to high volume levels.
Do not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
The illustration printed
in this operation
manual are for the
model XL-E1H.
(XL-E1H only)
0F R MW 1
92L87500016301
E-1
Information on Proper Disposal
Attention:
Your
product is
marked with
this symbol.
It means
that used
electrical
and
electronic
products
should not
be mixed
with general
household
waste.
There is a
separate
collection
system
for these
products.
A. Information on Disposal for Users (private
households)
1. In the European Union
Attention: If you want to dispose of this equipment,
please do not use the ordinary dustbin!
Used electrical and electronic equipment must
be treated separately and in accordance with
legislation that requires proper treatment, recovery
and recycling of used electrical and electronic
equipment.
Following the implementation by member states,
private households within the EU states may return
their used electrical and electronic equipment to
designated collection facilities free of charge*.
In some countries* your local retailer may also take
back your old product free of charge if you purchase
a similar new one.
*) Please contact your local authority for further
details.
If your used electrical or electronic equipment
has batteries or accumulators, please dispose of
these separately beforehand according to local
requirements.
By disposing of this product correctly you will help
ensure that the waste undergoes the necessary
treatment, recovery and recycling and thus prevent
potential negative effects on the environment and
human health which could otherwise arise due to
inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact
your local authorities and ask for the correct method
of disposal.
For Switzerland: Used electrical or electronic
equipment can be returned free of charge to the
dealer, even if you don’t purchase a new product.
Further collection facilities are listed on the
homepage of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you
want to discard it:
Please contact your SHARP dealer who will inform
you about the take-back of the product. You might
be charged for the costs arising from take-back and
recycling. Small products (and small amounts) might
be taken back by your local collection facilities.
For Spain: Please contact the established collection
system or your local authority for take-back of your
used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact
your local authorities and ask for the correct method
of disposal.
Information on Battery Disposal
The battery supplied with this product contains
traces of Lead.
For EU: The crossed-out wheeled bin implies that
used batteries should not be put to the general
household waste! There is a separate collection
system for used batteries, to allow proper treatment
and recycling in accordance with legislation. Please
contact your local authority for details on the
collection and recycling schemes.
For Switzerland: The used battery is to be returned
to the selling point.
For other non-EU countries: Please contact your
local authority for correct method of disposal of the
used battery.
Special notes
WARNINGS:
When the ON/STAND-BY button is set at STAND-BY
position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY
position, the unit may be brought into operation by
remote control.
This unit contains no user serviceable parts. Never
remove covers unless qualied to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation and
when not in use for a long period.
To prevent re or shock hazard, do not expose this
appliance to dripping or splashing. No objects lled
with liquids, such as vases, shall be placed on the
apparatus.
Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
The voltage used must be the same as that specied
on this unit. Using this product with a higher voltage
other than that which is specied is dangerous and
may result in a re or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specied.
CAUTION:
This product is classied as a CLASS 1 LASER
product.
This product contains a low power laser device. To
ensure continued safety, do not remove any cover or
attempt to gain access to the inside of the product.
Refer all servicing to qualied personnel..
Note:
Audio-visual material may consist of copyrighted works
which must not be recorded without the authority of the
owner of the copyright. Please refer to the relevant laws
in your country.
●
●
●
●
●
●
●
E-2
92Lxxxxxxxxxxx
MADE IN CHINA
FABRIQUÉ EN CHINA / FABRICADO EN CHINA
SERIAL NO.
NO. DE SERIE
MODEL NO.
NO. DE MODELO
XL-E1H
MICRO COMPONENT SYSTEM
SISTEMA MICRO COMPONENTE
AC 220 - 240V 50/60Hz 21W
Red
Black
Left speaker
Right speaker
FM aerial
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
Make sure to unplug the AC power cord before making any connections.
Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least
10 cm (4”) of free space along the sides, top and back
of the equipment.
Use the unit on a rm, level surface free from
vibration.
Place the speakers at least 30 cm (12”) away from
any CRT TV to avoid colour variations across the TV
screen. If the variations persist, move the speakers
further away from the TV. LCD TV is not prone to such
variation.
Keep the unit away from direct sunlight, strong magnetic
elds, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which
generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low
temperatures.
If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
In case of an electrical storm, unplug the unit for
safety.
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
●
●
●
●
●
●
●
●
●
Speaker connection■
System connections
Connect the black wire to the
minus (–) terminal, and the red
wire to the plus (+) terminal.
Use speakers with an impedance
of 4 ohms or more, as lower
impedance speakers can
damage the unit.
Do not make a mistake when connecting the right and
left speakers. The right speaker is the one on the right
side when you face the unit.
Do not let the bare speaker wires touch each
other.
Do not allow any objects to fall into or to be placed in
the bass reex ducts.
Do not stand or sit on the speakers. You may be
injured.
●
●
●
●
●
●
Precautions■
10 cm (4”)(4”) 10 cm (4”)(4”)
10 cm (4”)(4”)
10 cm (4”)(4”)
Incorrect
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
No naked ame sources, such as lighted candles,
should be placed on the apparatus.
Attention should be drawn to the environmental
aspects of battery disposal.
This unit should only be used within the range of 5°C
- 35°C (41°F - 95°F).
The apparatus is designed for use in moderate
climates.
●
●
●
●
●
●
●
The spec label (*)
The spec label
illustration may be
different from the
actual label used.
(*) Label is located at
the bottom of the
unit.
E-
Note:
Before using remote control, please remove plastic shield
at battery holder.
Whilst pushing the locking tab towards the center
of the remote control, slide out the battery holder.
Remove the old battery from the battery holder,
insert the new battery and then slide the battery
holder back into the remote control.
1�
2�
Remote control - battery installation
Precautions for battery use:
Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage due to
battery leakage.
Caution:
Do not use rechargeable battery (nickel-cadmium
battery, etc.).
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Batteries (battery pack or battery installed) shall not
be exposed to excessive heat such as sunshine, re
or the like.
Installing the battery incorrectly may cause the unit to
malfunction.
Notes concerning use:
Replace the battery if the operating distance is
reduced or if the operation becomes erratic. Purchase
“CR 2025”, coin lithium battery.
Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
Keep the remote control away from moisture, heat,
shock, and vibrations.
●
●
●
●
●
●
●
●
●
Battery holder
Remote
control
Plastic
shield
Polarity
(+) symbol
Battery type
Locking tab
Positive (+)
side up
General control
To turn the power on■
Function Main unit
Remote
control
Operation
Power on/
off
Press to turn the
power on or to
go to stand-by
mode.
Volume auto set-in■
If you turn off and on the main unit with volume set to
16 or higher, the volume will start at 16.
If you turn the unit off then on again with the volume
level set to less than 16, it will turn on again at the
level set.
●
●
Volume control■
Press the VOLUME +/– button to increase or decrease the
volume.
Extra bass control (X-BASS)■
When the X-BASS button is pressed, the unit will enter the
extra bass mode which emphasises the bass frequencies
and “X-BASS” indicator will light up. To cancel the extra
bass mode, press the X-BASS button again.
Auto power off function■
The main unit will enter the stand-by mode after 15 minutes
of inactivity during:
CD/USB: In the stop or pause mode.
TUNER: No reception of broadcast signal.
AUDIO IN: No detection of input signal.
Muting■
The volume is muted temporarily when pressing the
MUTE button on the remote control. Press again to restore
the volume.
Battery holder
Locking tab
Back of remote
control
E-
General control (continued)
Equalizer■
When the EQUALIZER button is pressed, the current
mode setting will be displayed. To change to a different
mode, press the EQUALIZER button repeatedly until the
desired sound mode appears.
POPS
VOCAL
FLAT
ROCK
CLASSI
C
JAZZ
No equalisation.
For rock music.
For classical music.
For pop music.
Vocals are enhanced.
For jazz.
Function (on main unit only)■
When the FUNCTION button on main unit is pressed, the
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
CD USB
TUNER
AUDIO IN
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or
the AC power lead becomes disconnected.
Listening to a CD or MP/WMA disc
Disc playback■
Press the ON/STAND-BY button to turn the power
on.
Press the CD button on the remote control or
FUNCTION button on the main unit repeatedly to
select CD function.
Open the disc compartment.
Place the disc on the disc tray, label side up.
Close the disc compartment.
Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
Press the button to start playback. After the last
track is played, the unit will stop automatically.
Notes for CD or MP/WMA discs:
When the end of the track is reached during fast
forward, the CD operation will be stopped. When
the beginning of the rst track is reached during fast
reverse, the unit will enter the playback mode.
Rewritable multi-session discs with unnished writing,
can still be played.
1�
2�
�
�
5�
�
●
●
Various disc functions■
Function
Main
unit
Remote
control
Operation
Pause
Press in the
playback mode.
Press the
button to resume
playback from
the paused point.
Track up/
down
Press in the
playback or stop
mode. If you
press the button
in the stop mode,
press the
button to start
the desired track.
Fast
forward/
reverse
Press and hold
down in the
playback mode.
Release the
button to resume
playback.
Total number
of tracks on
disc.
Total playing
time of the
disc.
Total number
of les (track)
on the disc.
Loading...