Sharp XL-DK225, CP-DK225 Service Manual

Page 1

XL-DK225

– 1

This document has been published to be used for after sales service only. The contents are subject to change without notice.

VID

EO /

PRECAUTIONS FOR USING LEAD-FREE SOLDER

CHAPTER 1. GENERAL DESCRIPTION

[1] Important Service Safety Precaution ........... 1-1

[2] Specifications............................................... 1-1

[3] Names Of Parts ........................................... 1-2

CHAPTER 2. ADJUSTMENTS

[1] CD Section .................................................. 2-1

[2] Test Mode.................................................... 2-2

[3] Standard Specification Of Stereo System

Error Message Display Contents ................. 2-4

CHAPTER 3. MECHANICAL DESCRIPTION

[1] Removing And Reinstalling The Main Parts

..................................................................... 3-1

[2] Disassembly ................................................ 3-2

CHAPTER 4. BLOCK DIAGRAM

[1] Block Diagram ............................................. 4-1

CHAPTER 5. CIRCUIT DESCRIPTION

[1] Waveforms Of Servo Circuit ........................ 5-1

[2] IC Voltage .................................................... 5-3

CHAPTER 6. CIRCUIT SCHEMATICS AND PARTS LAYOUT

[1] Notes On Schematic Diagram ..................... 6-1

[2] Types Of Transistor And LED ...................... 6-1

[3] Schematic Diagram ..................................... 6-2

[4] Charts Of Connecting Wires ...................... 6-10

[5] Wiring Side of PWB ................................... 6-12

CHAPTER 7. FLOWCHART

[1] Troubleshooting ........................................... 7-1

CHAPTER 8. OTHER

[1] Function Table Of IC .................................... 8-1

[2] FL Display.................................................... 8-9

PARTS GUIDE

SERVICE MANUAL

No. S7734XLDK225/

Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

CONTENTS

MICRO COMPONENT SYSTEM

MODEL

XL-DK225 Micro Component System consisting of XL-DK225 (main unit) and CP-DK225 (speaker system).

XL-DK225

• In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified be used.

SHARP CORPORATION

Page 2

XL-DK225

– 2

AudioXL-MP150Service ManualXLMP150MarketE

PRECAUTIONS FOR USING LEAD-FREE SOLDER

1. Employing lead-free solder

Example:

Indicates lead-free solder of tin, silver and copper.

2. Using lead-free wire solder

3. Soldering

When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper. Be careful when replacing parts with polarity indication on the PWB silk.

Lead-free wire solder for servicing

Ref No.

Description

Parts No.

PWB-A

PWB-B

PWB-C

92LPWB6895MANS

92LPWB6894DPLS

92LPWB6894PODS

MAIN (A1), POWER (A2), SPEAKER (A3), TRANSIT iPOD (A4)

DISPLAY (B1), HEADPHONE (B2), RE-FLASH (B3), VOLUME LED (B4)

iPOD

PWB-D 92LPWB6894CDUS

CD MP3

The LF symbol indicates lead-free solder, and is attached on the PWB and service manuals. The alphabetical character following LF shows the type of lead-free solder.

When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead wire solder may cause damage or accident due to cracks. As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40 C, were commend you to use a dedicated soldring bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, contact our service station or service branch in your area.

As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 C which is higher than the conventional lead solder by 40 C, and as it has poor solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, since the land may be peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady soldering condition. Lead-free solder contains more tin, and the end of the soldering bit may be easily corrected. Make sure to turn on and off the power of the bit as required. If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it.

"MAIN, POWER, SPEAKER, TRANSIT iPOD, DISPLAY, HEADPHONE, RE-FLASH, VOLUME LED, iPOD, CD MP3 PWB" of this model employs lead-free solder.

Page 3

XL-DK225

1 – 3

CHAPTER 1.

GENERAL DESCRIPTION

[1] Important Service Safety Precaution

CAUTION : “These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so”.

WARNING

1. For continued safety, no modification of any circuit should be attempted.

2. Disconnect AC power before servicing.

CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH SAME TYPE F801, F802, 3.15A, 125V/ F803, F804 2A, 125V/ F805 1.6A, 125V FUSES.

TYPE F801, F802, 3.15A, 125V/ F803, F804 2A, 125V/ F805 1.6A, 125V FUSES.

ATTENTION: POUR ASSURER UNE LONGUE PROTECTION CONTRE UN INCENDIE, REMPLACER SEULEMENT PAR UN FUSIBLE DE

General

Amplifier

Speaker

[2] Specifications

Power source AC 120 V - 60 Hz

Power consumption

105 W

Dimensions

Width: 6-3/4" (175 mm) Height: 9-1/2" (240 mm) Depth: 12-1/5" (315 mm)

Weight 10.5 lbs (4.78 kg)

Output power 20 watts minimum RMS per channel into

6 ohms from 100 Hz to 20 kHz, 10% total harmonic distortion

Output terminals Speakers: 6 ohms

Headphones: 16 - 50 ohms (recommended: 32 ohms) Subwoofer pre-out (audio signal): 200 mV/10 k ohms at 70 Hz

Input terminals Video/Auxiliary (audio signal):

500 mV/47 k ohms

Typ e 2-way type speaker system

2" (5 cm) tweeter 4-3/4" (12 cm) woofer

Maximum input power

40 W

Rated input power 20 W

Impedance 6 ohms

Dimensions Width: 5-13/16" (148 mm)

Height: 10-1/4" (260 mm) Depth: 6-7/8" (175.5 mm)

Weight 4.93 lbs. (2.24 kg)/each

Tune r

Frequency range FM: 87.5 - 108 MHz

AM: 530 - 1,720 kHz

CD player

Typ e 5-disc multi-play compact disc player

Signal readout Non-contact, 3-beam semiconductor laser

pickup

D/A converter Multi bit D/A converter

Frequency response

20 - 20,000 Hz

Dynamic range 90 dB (1 kHz)

1 – 1

Page 4

XL-DK225

1 – 4

Front panel

[3] Names Of Parts

1. iPod Terminal

2. Disc Trays

3. Timer Indicator

4. Remote Sensor

5. Disc Stop Button

6. Disc or iPod Play or Pause Button

7. Power On/Standby Button

8. CD Button

9. Tuner (Band) Button

10. Video/Auxiliary/iPod Button

11. Headphone Jack

12. Volume Control

13. Disc Number Select Buttons

14. Disc Tray Open/Close Button

12 3 45 67

9 10 11

13 14

7 8

Display

1. Disc Number Indicators

2. MP3/WMA Folder Indicator

3. MP3/WMA Title Indicators

4. MP3 Indicator

5. WMA Indicator

6. Sleep Indicator

7. Timer Play Indicator

8. MP3/WMA Total Indicator

9. Daily Timer Indicator

10. FM Stereo Mode Indicator

11. FM Stereo Receiving Indicator

12. Memory Indicator

13. Extra Bass Indicator

14. Disc Repeat Play Indicator

15. Disc Pause Indicator

16. Disc Play Indicator

Rear panel

1. Speaker Terminals

2. AC Power Cord

3. FM 75 Ohms Antenna Jack

4. AM Antenna Ground Terminal

5. AM Loop Antenna Terminal

6. Video/Auxiliary (Audio Signal) Input Jacks

7. Video Out Jack

8. Cooling Fan

9. Subwoofer Pre-output Jack

Speaker system

1. Tweeter

2. Woofer

3. Bass Reflex Duct

4. Speaker Wire

1 – 2

Page 5

XL-DK225

1 – 5

Remote control

4 5

8 9

16 17

1918

21 22

1. Remote Control Transmitter

2. Disc Number Select Buttons

3. Disc Direct Search Buttons

4. Equalizer Mode Select Button

5. Extra Bass/Demo Button

6. Volume Up and Down Buttons

7. Power On/Stand-by Button

8. CD Button

9. Tuner (Band) Button

10. Video/Auxiliary/iPod Button

11. Disc Clear/Dimmer Button

12. Disc Stop Button

13. Memory Button

14. Disc Play or Pause Button

15. iPod Play or Pause Button

16. Tuning Up Button

17. CD Track Up or Fast Forward, Tuner Preset Up,

Time Up Button

18. CD Track Down or Fast Reverse, Tuner Preset Down,

Time Down Button

19. Tuning Down Button

20. Play Mode Button

21. Display Button

22. Folder Button

23. Clock/Timer Button

1 – 3

Page 6

XL-DK225

2 – 1

CHAPTER 2. ADJUSTMENTS

[1] CD Section

1. CD SECTION

• Adjustment

Since this CD system incorporates the following automatic adjustment functions, readjustment is not needed when replacing the pickup. Therefore, different PWBs and pickups can be combined freely.

Each time a disc is changed, these adjustments are performed automatically. Therefore, playback of each disc can be performed under optimum conditions.

Items adjusted automatically

1) Offset adjustment (The offset voltage between the head amplifier output and the VREF reference voltage is compensated inside the IC.)

* Focus offset adjustment

* Tracking offset adjustment

2) Tracking balance adjustment

3) Gain adjustment (The gain is compensated inside the IC so that the loop gain at the gain crossover frequency will be 0 dB.)

* Focus gain adjustment

* Tracking gain adjustment

2. CD ERROR CODE DESCRIPTION

* 'CHECKING'

If Error is detected, 'CHECKING' will be displayed instead of 'ER-CD**'. 'ER-CD**' display will only be

displayed when error had been detected for the 5

times.

Error Explanation

10* CAM error. Can't detect CAM switch when CAM is moving. 11* When it detect cam operation error during initialize process. 20* TRAY error. Can't detect TRAY switch when TRAY is

moving.

21* When it detect TRAY operation error during initialize

process.

Page 7

XL-DK225

2 – 2

[2] Test Mode

• Setting the test mode

During stand-by mode, press STOP button while

pressing down the button and button. Then, press the CD button to enter the test mode.

IL isn’t done

OPEN/CLOSE operation is using manual. IL isn’t done

C DTEST

Laser ON.

Focus ON

CLV Servo ON

<<STOP>> key input.

Step

Tracking Servo ON

Reading Sub-code and Display

STOP and return to Step

Hold down << CD >> key for more than 2 sec.

Start Auto Adjustment at current pick-up location.

<< >> key input.

Page 8

XL-DK225

2 – 3

During at Step , if press << >> for more than 1 sec, it directly goes to step .

To cancel: Power OFF

<<STOP>> key input.

a) Focus Balance = FB : XX b) Focus Gain = FG : XX c) Tracking Balance = TB : XX d) Tracking Gain = TG : XX e) Focus Offset = FOFF : XX f) Tracking Offset = TOFF : XX g) RFRP = RFRP : XX h) Focus Error (RW Judgement) = RW : XX - XXXX i) Focus Error (Other than RW Judgement) = DA : XX - XXXX

Sliding the PICKUP with << >>, << >> button can be set in STOP mode or play mode.

STOP and return to Step

Note

STOP and return to Step

Everytime << DISPLAY >> key input

Page 9

XL-DK225

2 – 4

[3] Standard Specification Of Stereo System Error Message Display Contents

(*) CHECKING:

If CD changer mechanism error is detected, 'CHECKING' will be display instead of 'ER-CD**'. 'ER-CD**' will only be display when error had been detected for the 5

times.

Speaker abnormal detection and +B PROTECTION display

In case speaker abnormal detection or +B PROTECTION had occurred, the unit will automatically enter to stand-by mode and Timer indicator will flashing as below.

Example: In case of speaker abnormal

BEFORE TRANSPORTING THE UNIT

The following process need to be taken after set tapering/parts replacement.

1. Press the POWER ON/STAND-BY button to enter stand-by mode.

2. While pressing down the button and the button, press the button. The Micro Computer version number will be displayed as "X5U_10**".

3. Press the button until "WAIT"--> "FINISHED" appears.

4. Unplug the AC cord and the unit is ready for transporting.

Error Contents DISPLAY Notes

CD CD Changer Mechanism Error. ‘ER-CD**’ (*) 10: CAM SW Detection NG during normal operation

11: CAM SW Detection NG during initialize process 20: TRAY SW Detection NG during normal operation 21: TRAY SW Detection NG during initialize process

Focus Not Match/IL Time Over. ‘NO DISC’

TUNER PLL Unlock.

FM MHz

PLL Unlock.

87.50

TIMER LED OFF OFF

OFF

OFF OFF OFF OFF

FRAME

(REPEAT)

FLASHING FLASHING

NO. 2

ON ON ON

NO. 1 : +B PROTECTION NO. 2 : Speaker abnormal

NO NO. 1.1

Page 10

XL-DK255

3 – 1

CHAPTER 3.

MECHANICAL DESCRIPTION

[1] Removing And Reinstalling The Main Parts

1. CHANGER MECHANISM SECTION

Perform steps 1, 2, 9 and 10 of the disassembly method to remove the CD changer mechanism.

1.1 How to remove CD Disc (See Fig. 1-4)

1. When CD is at play position (Figure 1), rotate reduction gear C clock-wise as shown in Figure 2 until disc tray is at stock position, then rotate further to eject the disc tray so that CD can be removed

from the tray.

2. In another case, if CD mechanism is at tray No.1 play position and to remove CD located in tray No.3, the procedure is as follows:

If the gear up down board is located at tray No.1 position, then rotate gear clock-wise until it is at stock postiiton. Rotate reduction gear D clockwise (Figure 3) to move the CD mechanism to tray No.3 position. This is confirmed by checking the gear up down board position by the marking as indicated on the main chassis as shown in Figure 4.

CD Disc

CD at play position.

CD at stalk position.

CD Disc

Disc Tray

Guide Tray

Reduction gear C

Front Rear

Figure 1

Figure 2

Reduction gear D

Up Down

Mark 1

(DISC 1)

Mark 3

(DISC 3)

Mark 5

(DISC 5)

Mark 2

(DISC 2)

Mark 4

(DISC 4)

Gear up down board

Figure 3

Figure 4

Page 11

XL-DK255

3 – 2

[2] Disassembly

Note:

After removing the connector for the optical pickup from the connector, wrap the conductive aluminium foil around the front end of the connector so as to protect the optical pickup from electrostatic damage.

Caution on disassembly

Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance:

1) Take cassette tape and compact disc out of the unit.

2) Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit.

3) Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange the leads where they were before disassembling.

4) Take sufficient care on static electricity of integrated circuits and other circuits when servicing.

Figure 1

Figure 2

Figure 3

Side Panel (Right)

Side Panel

(Left)

3x12mm

(A1)x2

Rear Panel

Front Panel

Top Cabinet

3x10mm

(B1)x2

3x10mm

(C1)x1

3x10mm

(B1)x2

3x10mm

(B1)x2

3x12mm

(A1)x2

3x12mm

(A1)x2

3x10mm

(B1)x2

3x10mm

(D1)x4

3x10mm

(C1)x1

PULL

Speaker PWB

(D2)x1

(D3)x1

Hook

(C2)x1

PULL

Hook

(C2)x1

Rear Panel

CD MP3 PWB

CD Changer Unit

(C4)x2

(C3)x2

(C3)x1

Front Panel

PULL

(E4)x1

Front panel

Main PWB

Power PWB

(E3)x1

(F2)x1

(G1)x4

4x6mm

(F2)x1

(E1)x2

3x10mm

(F1)x2 3x10mm

(E2)x2

(E4)x1

Hook

PULL

1 Top Cabinet 1

2 Side Panel

(Left/Right)

3 CD Changer unit 2

1. Screw ............................(C1) X 2

2. Hook ..............................(C2) X 2

3. Socket ...........................(C3) X 3

4. Flat Cable ...................... (C4) X 2

1. Screw ............................(E1) X 3

2. Flat Cable ...................... (E2) X 2

3. Socket ...........................(E3) X 1

4. Hook .............................. (E4) X 2

1. Knob ...............................(J1) X 1

2. Nut..................................(J2) X 1

3. Washer...........................(J3) X 1

4. Screw .............................(J4) X 6

1. Screw ........................... (M1) X 1

1. Screw ............................(P1) X 4

2. Screw ............................(P2) X 4

1. Screw ............................(D1) X 4

2. Socket ...........................(D2) X 1

3. Flat Cable ...................... (D3) X 1

1. Screw ............................(F1) X 3

2. Socket ........................... (F2) X 2

1. Screw ............................(G1) X 4

1. Screw ............................(H1) X 2

1. Screw ............................(K1) X 2

1. Screw ............................ (L1) X 1

1. Screw ............................(A1) X 6

1. Screw ............................(B1) X 8

4 Rear Panel with 2

Speaker PWB

5 Front Panel 3

6 Main PWB 3

7 Power PWB 3

8 Speaker PWB 4

9 Display PWB 5

10 USB PW B / SUB PWB 5

11 Jack PWB 5

12 Re-Flash PWB 6

14 CD Mechanism 7

STEP REMOVAL PROCEDURE FIGURE

1. Screw ............................(N1) X 3

2. Flat Cable ...................... (N2) X 2

3. Socket ...........................(N3) X 1

13 CD MP3 PW B 7

(E1)x1

3x6mm

(F1)x1

3x6mm

Page 12

XL-DK255

3 – 3

(P2)x4 Special

CD Changer Unit

CD Mechanism

USB PWB

SUB PWB

Display PWB

Jack PWB

(K1)x2

(L1)x1 Special

Re-Flash PWB

Main Chassis

(J4)x6

(J1)x1

(J2)x1

(J3)x1

Front Panel

(P1)x2

(N2)x2

(N3)x1

Ø3x10mm

CD Changer Unit

Figure 4

Figure 5

Figure 6

Figure 7

Figure 9

Figure 10

Figure 8

STEP PROCEDURE FIGURE

1 Woofer 1. Net Frame Ass’y............ (A1) X 1

2. Catching Holder............. (A2) X 4

3. Screw ............................ (A3) X 4

4. Screw ............................ (A4) X 4

2 Tweeter 1. Screw ............................ (B1) X 2

9, 10

REMOVAL

Ø2.6x10mm

(M1)x1

Ø3x10mm

(N1)x3

Ø3x10mm

(P1)x2

Ø3x10mm

(H1)x2 Ø3x10mm

Speaker PWB

Rear Panel

Front Board

Tweeter

Woofer

Woofer Ring

Tweeter Ring

(A2)x4

(A3)x4

(B1)x2

(A4)x4

Net Frame Ass’y (A1) x1

Speaker Box

Ø4x20mm

Ø3x14mm

Ø3.5x14mm

Page 13

XL-DK255

3 – 4

-MEMO-

Page 14

XL-DK225

4 – 1

CHAPTER 4. DIAGRAMS

[1] Main Block Diagram

Figure 4-1: MAIN BLOCK DIAGRAM (1/2)

Page 15

XL-DK225

4 – 2

Figure 4-2: MAIN BLOCK DIAGRAM (2/2)

Page 16

XL-DK225

4 – 3

[2] CD Block Diagram

Figure 4-3: CD BLOCK DIAGRAM (1/2)

Page 17

XL-DK225

4 – 4

Figure 4-4: CD BLOCK DIAGRAM (2/2)

Page 18

XL-DK225

5 – 1

CHAPTER 5. CIRCUIT DESCRIPTION

[1] Waveforms Of CD Circuit

IC1

IC1 IC1

IC1

RFOUT

FDO

TDO

FDO

SPDO

PDOUT 1

PDOUT 0

FDO

RFOUT

Page 19

XL-DK225

5 – 2

[2] Voltage

VOLTAGE

1 0.02 26 0.01 51 1.53 76 3.26 2 1.63 27 1.52 52 0.03 77 1.63 3 0.76 28 3.03 53 3.27 78 0.98 4 0.70

6 0.70

29 1.52 54 0.03 79 0.02

5 0.59 30 1.52 55 0.03 80 1.74

31 0.01 56 3.27 81 1.63 7 1.63 32 3.27 57 1.53 82 1.63 8 3.27 33 0.03 58 3.27 83 1.68 9 1.63 34 4.53 59 0.04 84 1.63

10 1.63 35 1.53 60 3.27 85 1.62 11 1.63 36 0.01 61 0.03 86 1.64 12 1.63 37 3.25 62 0.03 87 1.66 13 1.63 38 2.41 63 0.03 88 1.62 14 0.01 39 2.14 64 0.03 89 15 0.52 40 2.59 65 1.62 90 3.27 16 0.55 41 2.25 66 1.65 91 3.25 17 0.01 42 0.61 67 3.24 92 0.01 18 0.01 43 3.25 68 1.49 93 0.02 19 1.11 44 0.04 69 0.02 94 1.63 20 0.36 45 0.04 70 1.63 95 1.63 21 0.26 46 0.04 71 3.26 96 1.63 22 0.01 47 0.04 72 1.61 97 1.63 23 0.26 73 1.31 98 1.63 24 0.34 49 1.64 74 0.02 99 1.64 25 0.54 50 1.65 75 1.38 100 1.63

IC1

48 0.10

0.50

PIN NO

VOLTAGE

1 3.18 10 3.27 19 3.20 28 7.09 2 3.17 11 1.63 20 3.20 29 0.01 3 3.19 12 1.63 21 0.01 30 1.63 4 3.20 13 1.63 22 0.01 31 2.24 5 3.19 14 1.63 23 0.01 32 3.15 6 3.18 15 1.63 24 0.01 33 3.16 7 0.00 16 1.63 25 0.00 34 2.69 8 4.39 17 1.62 26 7.03 35 3.16 9 7.08 18 1.62 27 7.08 36 3.16

PIN NO

VOLTAGE

E 3.26 E 5.05 E 1.48 E 0.01 C 0.89 C 3.26 C 3.26 C 0.02 B 4.37 B 4.37 B 2.17 B 3.11

IC2

Q1 Q2 Q3 Q4

VOLTAGE

E 0.00 C 0.04 B 2.98

VOLTAGE

E 5.08 C 5.05 B 4.37

Page 20

XL-DK225

5 – 3

VOLTAGE

(V)

VOLTAGE

(V)

VOLTAGE

(V)

VOLTAGE

(V)

3.22

3.30

-26.44

-26.42

3.22

3.14

-26.40

-28.77

0.00

3.31

-26.40

-26.41

0.00

3.31

-26.40

0.00

3.15

3.24

-26.41

3.22

3.23

3.20

-24.06

0.00

3.24

-17.00

0.00

3.23

3.24

-26.40

0.00

3.24

0.00

-24.07

0.47

3.24

0.00

-9.89

0.63

3.31

3.29

-26.40

3.19

3.24

1.51

-9.98

1.54

0.00

1.51

-17.00

0.00

-12.34

0.00

-24.10

-9.94

3.24

0.00

-28.77

-26.40

3.24

3.14

-28.78

-26.42

1.05

0.00

-28.77

-24.06

0.00

-28.77

-14.67

3.18

3.22

-28.75

-12.36

0.00

3.31

-28.77

-28.76

0.00

-28.77

-28.76

0.00

-21.70

-28.76

0.00

3.24

-28.97

-28.75

0.71

3.24

-26.40

-26.45

0.00

3.24

-28.77

-26.41

0.00

-28.76

-26.41

3.24

0.00

-28.76

-26.40

0.00

21.71

-26.40

0.00

-24.06

-26.40

3.24

-24.07

-26.40

0.00

3.22

-24.07

-26.40

3.24

3.28

3.24

0.00

3.24

3.31

3.28

3.24

3.27

0.00

4.62

4.65

0.00

4.62

0.00

4.63

0.00

4.63

4.64

0.00

3.31

4.62

4.64

0.00

3.28

4.62

0.00

0.76

3.28

4.63

0.00

0.63

3.28

4.65

0.00

3.28

4.61

4.63

3.23

0.00

4.65

9.28

0.00

3.28

4.61

0.00

0.58

3.30

4.65

0.00

3.24

4.65

0.00

100

0.00

4.64

4.63

IC701 IC702

IC601

VOLTAGE

(V)

PIN NOVOLTAGE

(V)

Page 21

XL-DK225

5 – 4

VOLTAGE

(V)

PIN NO

VOLTAGE

(V) (V) (V)

VOLTAGE

PIN NO

VOLTAGE

1 3.30 1 3.90 1 -0.10 9 -23.00 2 3.30 2 0.60 2 -0.10 10 0.00 3 0.00 3 5.60 3 - 11 0.00 4 - 4 21.90 12 -22.10 5 - 5 -20.70 13 0.00

60.00 14-0.10

70.00 15-0.10

823.10

VOLTAGE

(V)

PIN NO

VOLTAGE

(V)

VOLTAGE

(V)

PIN NO

VOLTAGE

(V)

1 15.80 1 3.30 1 5.10 5 16.20 2 0.00 2 0.00 2 13.00 6 10.00 3 4.90 3 5.10 3 16.40 7 8.50

40.00

1 5.60 1 0.00 1 0.00 1 2.20 2 0.60 2 0.00 2 0.00 2 2.20 3 13.90 3 0.70 3 0.70 3 0.00

1 0.00 1 0.00 1 0.00 1 0.00 2 3.20 2 3.20 2 3.30 2 0.00 3 0.00 3 0.00 3 0.00 3 3.00

-28.90

1 0.80 1 0.00 1 0.00

-29.50

2 0.00 2 3.50 2 3.40

-37.60

3 0.00 3 0.00 3 0.00

1 0.00 1 0.00 1 0.00 1 0.00 2 3.30 2 3.10 2 3.10 2 0.00 3 0.00 3 0.00 3 0.00 3 0.70

10.70

20.00

33.60

Q906

PIN NOVOLTAGE

(V)

VOLTAGE

(V)

PIN NOVOLTAGE

(V)

PIN NOVOLTAGE

(V)

PIN NOVOLTAGE

(V)

Q902 Q903 Q904 Q905

VOLTAGE

(V)

PIN NOVOLTAGE

(V)

PIN NOVOLTAGE

(V)

PIN NOVOLTAGE

(V)

Q801 Q841 Q860 Q901

VOLTAGE

(V)

PIN NOVOLTAGE

(V)

PIN NOVOLTAGE

(V)

PIN NOVOLTAGE

(V)

Q701 Q702 Q704 Q706

Q604 Q608

PIN NOVOLTAGE

(V)

PIN NOVOLTAGE

(V)

PIN NOVOLTAGE

(V)

PIN NOVOLTAGE

(V)

IC854 Q603

IC703 IC705 IC901

IC851

IC852 IC853

Page 22

XL-DK225

5 – 5

-MEMO-

Page 23

XL-DK225

6 – 1

CHAPTER 6. CIRCUIT SCHEMATICS AND PARTS LAYOUT

[1] Notes On Schematic Diagram

•Resistor: To differentiate the units of resistors, such symbol as K and M are used: the symbol K means 1000 ohm and the symbol M means 1000 kohm and the resistor without any symbol is ohm-type resistor. Besides, the one with “Fusible” is a fuse type.

• Capacitor: To indicate the unit of capacitor, a symbol P is used: this symbol P means pico-farad and the unit of the capacitor without such a symbol is microfarad. As to electrolytic capacitor, the expression “capacitance/ withstand voltage” is used. (CH), (TH), (RH), (UJ): Temperature compensation (ML): Mylar type (P.P.): Polypropylene type

• Schematic diagram and Wiring Side of P.W.Board for this model are subject to change for improvement without prior notice.

• The indicated voltage in each section is the one measured by Digital Multimeter between such a section and the chassis with no signal given.

1. In the tuner section,

indicates AM indicates FM stereo

2. In the CD section, the CD is stopped.

• Parts marked with “ ” ( ) are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

[2] Types Of Transistor And LED

REF. NO DESCRIPTION POSITION

SW701 DISC4 ON—OFF SW702 DISC5 ON—OFF SW703 OPEN/CLOSE ON—OFF SW704 DISC1 ON—OFF SW705 DISC2 ON—OFF SW706 DISC3 ON—OFF SW707 POWER ON/STAND-BY ON—OFF SW708 PLAY/REPEAT ON—OFF SW709 STOP ON—OFF SW710 VIDEO/AUX/USB ON—OFF SW711 TUNER (BAND) ON—OFF SW712 CD ON—OFF VR701 VOLUME MAX—MIN

KRC107 S

KRA102 S

KRC102 S KRC104 S KTA1504 GR KTC3875 GR KTA1544 T KTC3265 Y

HSS4148

(3)

(1)

(2)

TOP

VIEW

KDS184

TOP VIEW

TOP VIEWTOP VIEW

KTA1271 Y KTA1274 Y KIA78L05

VIEW

FRONT

ECB

(S)(G)(D)

VIEW

FRONT

(1)(2)(3)

1N4004S DRL204F MA 111

10XB60F S4B05GM

AC AC

VIEW

FRONT

FRONT VIEW

343VC3F 503BC2E30

KIA7805A

KTC3199 GR KTC3203 Y

123

Page 24

XL-DK225

6 – 2

[3] Schematic Diagram

Figure 6-1: MAIN SCHEMATIC DIAGRAM (1/2)

TO POWER IC SECTION

TO CD

FROM POWER SECTION

TUNER SECTION

23456

Page 25

XL-DK225

6 – 3

Figure 6-2: MAIN SCHEMATIC DIAGRAM (2/2)

8 9 10 11 12

Page 26

XL-DK225

6 – 4

TO MAIN SECTION

TO DISPLAY

23456

Figure 6-3: POWER SCHEMATIC DIAGRAM (1/2)

Page 27

XL-DK225

6 – 5

SPEAKER JACK PWB

AC SUPPLY

120V ~ 60Hz

8 9 10 11 12

Figure 6-4: POWER SCHEMATIC DIAGRAM (2/2)

Page 28

XL-DK225

6 – 6

Figure 6-5: DISPLAY SCHEMATIC DIAGRAM (1/2)

TO MAIN SECTION

TO PWR SECTION

SYSTEM MICOM REFLASH PWB

TO MAIN SECTION

23456

Page 29

XL-DK225

6 – 7

Figure 6-6: DISPLAY SCHEMATIC DIAGRAM (2/2)

TO MP3 SERVO

FOR MICOM REFLASH ONLY

8 9 10 11 12

Page 30

XL-DK225

6 – 8

Figure 6-7: CD MP3 SCHEMATIC DIAGRAM (1/2)

23456

Page 31

XL-DK225

6 – 9

Figure 6-8: CD MP3 SCHEMATIC DIAGRAM (2/2)

8 9 10 11 12

Page 32

XL-DK225

6 – 10

Figure 6-9: iPOD SCHEMATIC DIAGRAM (1/2)

IPOD CONNECTION

RESISTOR WITH 1% TOLERANCE

23456

Page 33

XL-DK225

6 – 11

Figure 6-10: iPOD SCHEMATIC DIAGRAM (2/2)

TO TRANSIT iPOD

8 9 10 11 12

Page 34

XL-DK225

6 – 12

[4] Charts Of Connecting Wires

MAIN PWB -A1

TRANSIT iPOD

PWB-A4

iPOD PWB-C

HEADPHONE PWB-B2

DISPLAY PWB-B1

5 4 3 2

2 1

179PNC

2 0 7 S N C

987654321

1 2 3

4 5

6 7 8

BI702

6 7 54321

654321

D R

L B R G

L B

R G

L B

BI701

CNS701

2 1

3 0 7 P

N C

2 1

3 0 7

S N C

BI703

10 8 6 4 2

9 11

7531

CNP705

CNP702

246810

3579

76 8 9 54321

BI601

CNS601

K B

Y G

K B

Y G

K B

Y G

K B

1 0 8 I B

1 0 8

S N C

8 0 7 P N C

JK701

13579

2468

CNP301

B 1 0

7 P N C

9 7 5 3 1

0 1

1 1

2 1

3 1

4 1

5 1

6 1

7 1

8 6 4 2

TUNER PACK

ANTENNA

GND

FFC301

1 0 3

C F F

D R

H W

K B

H W

K B

H W

K B

H W

FROM

HEADPHONE

5 0 7 C F F

2 0 7 C F F

MAI

FFC701

7 1

A 1 0 7

P N C

O T

1 B - B W

P Y A L P S I

CNP6

CD MP3 PWB-D

9 8 10 11

6 5 4 3

2 1

WH RD

6 5 4

3 2 1

7 9 10

WH RD

POWER PWB-A2

8 9 10

6 5 4 3 2 17

1 0 8 P N C

6 4 3 2 15

0 8 P N C

5 0 8

P N C

5 0 8 S N

PT801

AC POWER SUPPLY CORD AC 120V~ 60Hz

PT841

SPEAKER PWB-A3

BI902

CNS902

CNP902

4 3 2 1

1 0 9 O S

L A N I M R E T R

E K A E P S

R-CH L-CH

1 315 17

14 16

23456

L-CH L-CH

R-CH R-CH

FAN MOTOR

1357911

2 4 6 8 10 12

CNPU3

FROM EXTERNAL

iPOD DEVICE

1 2 3 4 5

1 2 3 4

76 8 954321

111

121

123456789101112

1 2 3 4 5 6 7 8 9 10 11 12 13

123456789101112

1357911

2 4 6 8 10 12

CNPU4

CNPU5

RDWHBLWHBLWHBLWHBLWHBL

CNP101

BI101

VOLUME LED

PWB-B4

Figure 6-11: WIRING CONNECTION (1/2)

Page 35

XL-DK225

6 – 13

Figure 6-12: WIRING CONNECTION (2/2)

RE-FLASH PWB-A4

CD PICK-UP UNIT

-B1

CD MP3 PWB-C

12345678

CNPU1

12345678

CNPU2

97531

12 8 6 4 2

CNP3

6 5 4 3 2 1

2 P N

2 S N

CNP701A

1 0 7

C F F

CNP6

246810

1 16

116

357 9

17 1

246810

13579

4 P N C

FFC4

0 1 8 6 4 2

9 11 7 5 3 1

1 11

CNP1

FFC1

FROM

EXTERNAL MICOM

DEVICE

CNP702

FROM

DISPLAY PWB-B1

CNP701B

FROM

MAIN PWB-A1

D MOTOR PWB

1 3 5 7 9 11 13 15 17

2 4 6 8 10 12 14 16

8 9 10 11 12

CD CHANGER

MECHANISM UNIT

BK BLACK

GR GREEN

COLOR TABLE

BLUE

BROWN

GRAY

WH WHITE

RD RED

1 2 3 4 5 6 7 8 9

CNP5

5 0 7 C F F

2 0 7 C F

Page 36

XL-DK225

6 – 14

[5] Wiring Side Of PWB

Figure 6-13: WIRING SIDE OF MAIN PWB (TOP VIEW) (1/2)

ECB

SPEAKER PWB-A3

SO901

SPEAKER TERMINAL

R-CH

L-CH

123 4

13 5 7 911131517

4681012

12345678910

14 16

12 3 456891011

MAIN PWB-A1

Lead-free solder indication

Lead-free solder is used in the MAIN PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.

Page 37

XL-DK225

6 – 15

Figure 6-14: WIRING SIDE OF MAIN PWB (TOP VIEW) (2/2)

ECB

TRANSIT iPOD PWB-A4

2 3 4 5 6 7 8 9 1011 121

23456189101112

12345679

1234 5

5432 1

6 7 8 9 10 11 12 13 14 15

23456

7911

81012

VIDEO/AUX IN

L-CH and R-CH

VIDEO OUT

SUBWOOFER

PRE-CUT

Page 38

XL-DK225

6 – 16

Figure 6-15: WIRING SIDE OF MAIN PWB (BOTTOM VIEW) (1/2)

MAIN PWB-A1

Lead-free solder indication

Lead-free solder is used in the MAIN PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.

Page 39

XL-DK225

6 – 17

Figure 6-16: WIRING SIDE OF MAIN PWB (BOTTOM VIEW) (2/2)

Page 40

XL-DK225

6 – 18

11223344556678910

1 2 3

BC E

POWER SUPPLY

AC 120V~60Hz

612345

8 9 10 11 12 13 14 15 16 17

T. F.

COLOR TABLE

WHBKWHITE

BLACK

POWER PWB-A2

Lead-free solder indication

Lead-free solder is used in the POWER PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.

Figure 6-17: WIRING SIDE OF POWER PWB

Page 41

XL-DK225

6 – 19

-MEMO-

Page 42

XL-DK225

6 – 20

Figure 6-18: WIRING SIDE OF DISPLAY PWB (TOP VIEW) (1/2)

1357911131517

2 4 6 8 10 12 14 16

3579

246810

282930313233343536373839404142434445464748495051

DISPLAY PWB-B1

Lead-free solder indication

Lead-free solder is used in the DISPLAY PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.

Page 43

XL-DK225

6 – 21

1357911

24681012

23456789101112131415161718192021222324252627282930

1 1

132456789

123

1234567

Figure 6-19: WIRING SIDE OF DISPLAY PWB (TOP VIEW) (2/2)

Page 44

XL-DK225

6 – 22

19 20 212223 24 25 26272

3456789

181716151413121110

DISPLAY PWB-B1

Lead-free solder indication

Lead-free solder is used in the DISPLAY PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.

Figure 6-20: WIRING SIDE OF DISPLAY PWB (BOTTOM VIEW) (1/2)

Page 45

XL-DK225

6 – 23

24 25 262728 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

Figure 6-21: WIRING SIDE OF DISPLAY PWB (BOTTOM VIEW) (2/2)

Page 46

XL-DK225

6 – 24

12345

FROM

HEADPHONE

23456

Lead-free solder indication

Lead-free solder is used in the HEADPHONE, REFLASH, VOLUME LED PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.

HEADPHONE PWB-B2

12345678

VOLUME LED PWB-B4

REFLASH PWB-B3

Figure 6-22: WIRING SIDE OF HEADPHONE, REFLASH, VOLUME LED PWB (TOP VIEW)

Page 47

XL-DK225

6 – 25

23456

HEADPHONE PWB-B2

VOLUME LED PWB-B4

Lead-free solder indication

Lead-free solder is used in the HEADPHONE, VOLUME LED PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.

Figure 6-23: WIRING SIDE OF HEADPHONE, VOLUME LED PWB (BOTTOM VIEW)

Page 48

XL-DK225

6 – 26

123456789

10111213

iPOD PWB-C

Lead-free solder indication

Lead-free solder is used in the iPOD PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.

Figure 6-24: WIRING SIDE OF iPOD PWB (TOP VIEW)

Page 49

XL-DK225

6 – 27

Lead-free solder indication

Lead-free solder is used in the iPOD PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.

iPOD PWB-C

Figure 6-25: WIRING SIDE OF iPOD PWB (BOTTOM VIEW)

Page 50

XL-DK225

6 – 28

10 11

1211109876542

BCE

1234 65

1357 11

2468

1210

678954312

SCREW

TO CHASSIS

CD MP3 PWB-D

Figure 6-26: WIRING SIDE OF CD MP3 PWB (TOP VIEW) (1/2)

Page 51

XL-DK225

6 – 29

711

13 15

12 141610

313

658710912 142

111

Lead-free solder indication

Lead-free solder is used in the CD MP3 PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.

Figure 6-27: WIRING SIDE OF CD MP3 PWB (TOP VIEW) (2/2)

Page 52

XL-DK225

6 – 30

Lead-free solder indication

Lead-free solder is used in the CD MP3 PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.

CD MP3 PWB-D

Figure 6-28: WIRING SIDE OF CD MP3 PWB (BOTTOM VIEW) (1/2)

Page 53

XL-DK225

6 – 31

Figure 6-29: WIRING SIDE OF CD MP3 PWB (BOTTOM VIEW) (2/2)

Page 54

XL-DK225

7 – 1

CHAPTER 7. FLOWCHART

[1] Troubleshooting

1. When the CD does not function

The CD section may not operate when the objective lens of the optical pickup is dirty. Clean the objective lens, and check the playback operation. When this section does not operate even after the above step is taken, check the following items.

Remove the cabinet and follow the trouble shooting instructions.

"Track skipping and/or no TOC (Table Of Contents) may be caused by build up of dust other foreign matter on the laser pickup lens. Before attempting any adjustment make certain that the lens is clean. If not, clean it as mentioned below."

Turn the power off.

Gently clean the lens with a lens cleaning tissue and a small amount of isopropyl alcohol.

Do not touch the lens with the bare hand.

2. When a CD cannot be played

2.1. Pressing the CD operation key is accepted, but playback does not occur.

1) Focus-HF system check

2) Tracking system check

3) Spin system check

4) PLL system check

5) Others

Parts code

1. CD optical pickup Lens cleaner disc UDSKA0004AFZZ

HOW TO USE

CAUTION

Cleaning fluid

Cleaner disc

Using the brush in the cleaner cap, apply 1 or 2 drops of the cleaning fluid to the brush on the CD cleaner disc which has the mark next to it. Place the CD cleaner disc onto the CD disc tray with the brush side down, then press the play button. You will hear music for about 20 seconds and the CD player will automatically stop. If it still play continuously, press the stop button.

The CD lens cleaner should be effective for 30-50 operations, however if the brushes become worn out earlier then please replace the cleaner disc. If the CD cleaner brushes become very wet then wipe off any excess fluid with a soft cloth. Do not drink the cleaner fluid or allow it contact with the eyes. In the event of this happening then drink and / or rinse with clean water and seek medical advice. The CD cleaner disc must not be used on car CD players or on computer CD-ROM drives. All rights reserved. Unauthorized duplicating, broadcasting and renting this product is prohibited by law.

Page 55

XL-DK225

7 – 2

Although a CD is inserted and the cover is closed, "NO DISC" is displayed.

(1) Focus-RF system check.

Press the Tray1 CD Eject Button without inserting a disc, and try starting the playback operation.

Figure 1

IC1

FDO

TDO

1. Does the pickup move to the PICKUP-IN Switch (NSW1) position?

No Sled motor (NM2).

Yes

2. Does the focus (lens) move up and down? (Waveform drawing Figure 1)

No Check the focus peripheral circuit.

Yes

3. Is the laser lit? No Check the laser diode driver Q1 peripheral circuit.

Yes

4. Is the turntable rotating? No Spindle motor (NM1).

When a disc is loaded, start playback operation.

1. Is focus servo activated? (Waveform drawing Figure 2)

No Pins 5~9, 11, 18 19 and 22 on IC1

Check the laser diode driver Q1 peripheral circuit.

Yes

2. Is the RF waveform normal? (Waveform drawing Figure 3)

No If the level is not normal.

Figure 2

IC1

FDO

Figure 3

IC1

RFOUT

Page 56

XL-DK225

7 – 3

Check the TE waveform at pin 16 on IC1.

(2) Focus-RF system check.

If the waveform shown in Figure 4 appears and soon after NO DISC appears?

Yes

The tracking servo is not activated. Check the peripheral circuits at pins 15, 16 and 23 on IC1, and FFC1.

"Initialization" is possible, but play is not possible?

Yes

A normal jump operation cannot be completed or the beginning of the track cannot be found. Check the around pin 23 on IC1.

"Initialization" is not possible. Data cannot be read. Check the VCO-PLL (Pin26~30 on IC1)

system.

Figure 4

IC1

RFOUT

(3) Spin system check.

Press the OPEN/CLOSE switch without inserting a disc, and then try starting the play operation.

1. The turntable rotates a little? (Waveform drawing Figure 5)

Yes The spin driver circuit is OK.

2. The turntable doesn't rotate. Check around pin 25 on IC1, pins 1 and 2 on CNP2.

Figure 5

IC1

FDO

SPDO

Page 57

XL-DK225

7 – 4

(4) PLL system check.

When a disc is loaded, start play operation.

The RF waveform is normal, but the TOC data cannot be read.

Check the PDOUT waveform. (Figure 6)

Check around pins 26~30 on IC1.

Figure 6

IC1

PDOUT 1

PDOUT 0

FDO

Page 58

XL-DK225

PARTS GUIDE

MICRO COMPONENT SYSTEM

XL-DK225

MODEL

XL-DK225 Micro Component System consisting of XL-DK225 (main unit) and CP-DK225 (speaker system).

This document has been published to be used for after sales service only. The contents are subject to change without notice.

Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

SHARP CORPORATION

CONTENTS

[1] INTEGRATED CIRCUITS

[2] TRANSISTORS

[3] DIODES

[4] TRANSFORMERS

[5] COILS

[6] CRYSTALS / VIBRATORS

[7] CAPACITORS

[8] RESISTORS

[9] OTHER CIRCUITRY PARTS

[10] CABINET PARTS /

CD MECHANISM PARTS

[11] SPEAKER BOX PARTS

[12] ACCESSORIES / PACKING

PARTS

[13] P.W.B. ASSEMBLY

(Not Replacement Item)

[14] OTHER SERVICE PARTS

Page 59

XL-DK225

NO. PARTS CODE

PRICE

RANK

NEW

MARK

PAR T

RANK

DESCRIPTION

[1] INTEGRATED CIRCUITS

IC1 VHiTC94A70FG2 BD CD MP3 Decorder

IC2 VHiLA6261//-1 AN CD Driver IC601 VHiR2S15904-1 AL Audio Pro IC701 RH-iXA158AW00 System Microcomputer, IXA158AW IC702 VHiM66005AHP1 AS FL Driver IC703 VHiPST3227N1E AD Reset IC IC705 VHi6201P332-1 AE Voltage Regulator, 3.3V IC851 VHiAN80T53/-1 AL Multi Regulator, AN80T53 IC852 VHiKiA7805AP1 AF Constant Voltage Regulator, KIA7805AP IC853 VHi6201P332-1 AE Voltage Regulator, 3.3V IC854 VHiKiA78L05-1 AF Constant Voltage Regulator, KIA78L05 IC901 VHiSTK43205-1 AT Power IC, STK432-050

[2] TRANSISTORS

Q1 VSKTA1504GR-1 AB Silicon,PNP,KTA1504 GR Q2 VSKTA1271Y/-1 AC Silicon,PNP,KTA1271 Y Q3 VSKTC3875GR-1 AB Silicon,NPN,KTC3875 GR Q4 VSKRC104S//-1 AB Digital,NPN,KRC104 S Q5 VSKTA1544T/-1 AD Silicon,PNP,KTA1544 T

Q8 VSKRC107S//-1 AB Digital,NPN,KRC107 S Q603 VSKTC3875GR-1 AB Silicon,NPN,KTC3875 GR Q604 VSKTC3875GR-1 AB Silicon,NPN,KTC3875 GR Q608 VSKRA102S//-1 AB Digital,PNP,KRA102 S Q610 VSKTC3875GR-1 AB Silicon,NPN,KTC3875 GR Q611 VSKTC3875GR-1 AB Silicon,NPN,KTC3875 GR Q612 VSKTC3875GR-1 AB Silicon,NPN,KTC3875 GR Q613 VSKTC3875GR-1 AB Silicon,NPN,KTC3875 GR Q614 VSKTA1504GR-1 AB Silicon,PNP,KTA1504 GR Q701 VSKRC104S//-1 AB Digital,NPN,KRC104 S Q702 VSKRC104S//-1 AB Digital,NPN,KRC104 S Q704 VSKRC104S//-1 AB Digital,NPN,KRC104 S Q706 VSKRC102S//-1 AB Digital,NPN,KRC102 S Q801 VSKTA1274Y/-1 AE Silicon,PNP,KTA1274 Y Q841 VSKTC3199GR-1 AB Silicon,NPN,KTC3199 GR Q860 VSKRC104S//-1 AB Digital,NPN,KRC104 S Q901 VSKTC3875GR-1 AB Silicon,NPN,KTC3875 GR Q902 VSKTC3875GR-1 AB Silicon,NPN,KTC3875 GR Q903 VSKTC3875GR-1 AB Silicon,NPN,KTC3875 GR Q904 VSKTC3875GR-1 AB Silicon,NPN,KTC3875 GR Q905 VSKTC3265Y/-1 AC Silicon,NPN,KTC3265 Y Q906 VSKTC3203Y/-1 AC Silicon,NPN,KTC3203 Y

[3] DIODES

D1 VHDKDS184//-1 AB Silicon,KDS184 D104 VHDMA111///-1 AC Silicon,MA111 D105 VHDMA111///-1 AC Silicon,MA111 D603 VHDHSS4148+-1 AA Silicon,DHSS4148 D604 VHD1N4004S/-1 AB Silicon,DS1N4004S D605 VHD1N4004S/-1 AB Silicon,DS1N4004S D607 VHDMA111///-1 AC Silicon,MA111 D608 VHDMA111///-1 AC Silicon,MA111 D609 VHDMA111///-1 AC Silicon,MA111 D610 VHDMA111///-1 AC Silicon,MA111 D611 VHDMA111///-1 AC Silicon,MA111 D613 VHDMA111///-1 AC Silicon,MA111 D615 VHDMA111///-1 AC Silicon,MA111 D701 VHDMA111///-1 AC Silicon,MA111 D702 VHDMA111///-1 AC Silicon,MA111 D705 VHD1N4004S/-1 AB Silicon,DS1N4004S D706 VHD1N4004S/-1 AB Silicon,DS1N4004S D707 VHDHSS4148+-1 AA Silicon,DHSS4148 D712 VHDMA111///-1 AC Silicon,MA111 D713 VHDHSS4148+-1 AA Silicon,DHSS4148 D802 VHDTS4B05GM-1 AG Rectifier, 4B05GM D803 VHDGDRL204F-1 AC Silicon,RL204F D804 VHDGDRL204F-1 AC Silicon,RL204F D805 VHD1N4004S/-1 AB Silicon,DS1N4004S D806 VHD1N4004S/-1 AB Silicon,DS1N4004S D842 VHD1N4004S/-1 AB Silicon,DS1N4004S D843 VHD1N4004S/-1 AB Silicon,DS1N4004S D844 VHD1N4004S/-1 AB Silicon,DS1N4004S D845 VHD1N4004S/-1 AB Silicon,DS1N4004S D846 VHD1N4004S/-1 AB Silicon,DS1N4004S D847 VHD1N4004S/-1 AB Silicon,DS1N4004S D848 VHD1N4004S/-1 AB Silicon,DS1N4004S D849 VHD1N4004S/-1 AB Silicon,DS1N4004S D850 VHD1N4004S/-1 AB Silicon,DS1N4004S D853 VHD1N4004S/-1 AB Silicon,DS1N4004S D855 VHDHSS4148+-1 AA Silicon,DHSS4148 D856 VHDHSS4148+-1 AA Silicon,DHSS4148 D860 VHDHSS4148+-1 AA Silicon,DHSS4148 D861 VHDMA111///-1 AC Silicon,MA111 D862 VHDMA111///-1 AC Silicon,MA111 D863 VHDHSS4148+-1 AA Silicon,DHSS4148 D864 VHDHSS4148+-1 AA Silicon,DHSS4148 D868 VHDMA111///-1 AC Silicon,MA111

Page 60

XL-DK225

NO. PARTS CODE

PRICE RANK

NEW

MARK

PAR T RANK

DESCRIPTION

D905 VHDMA111///-1 AC Silicon,MA111 D906 VHDMA111///-1 AC Silicon,MA111 D907 VHDMA111///-1 AC Silicon,MA111 D911 VHDHSS4148+-1 AA Silicon,DHSS4148 D912 VHDMA111///-1 AC Silicon,MA111 D913 VHDMA111///-1 AC Silicon,MA111 D914 VHDHSS4148+-1 AA Silicon,DHSS4148

D918 VHDMA111///-1 AC Silicon,MA111 LED701 VHPSLR343VC3F AC LED,Red,SLR343VC3F LED708 VHP503BC2E30Z AG LED,Blue,504BC2E30

ZD801 VHEZJ6R2A++1E AB Zener, 6.2V ZD802 VHEZJ8R2A++1E AB Zener, 8.2V ZD803 VHEZJ30B+++1E AB Zener, 30V ZD805 VHEZJ15B+++1E AB Zener, 15V ZD860 VHEZJ11B+++1E AB Zener, 11V ZD861 VHEZJ6R8B++1E AB Zener, 6.8V

[4] TRANSFORMERS

PT801 RTRNPA088AWZZ BD Power ( Main )

PT841 RTRNP0483AWZZ AL Power ( Sub )

[5] COILS

FB1 RBLN-0061TAZZ AB Chip Ferrite Core

FB2 RBLN-0061TAZZ AB Chip Ferrite Core L701 VP-DH220K0000 AB 22µH,Peaking L702 VP-DH220K0000 AB 22µH,Peaking L703 VP-DH470K0000 AB 47µH,Peaking L901 RCILZA017AWZZ AB 0.29 µH L902 RCILZA017AWZZ AB 0.29 µH L903 VP-DH2R2K0000 AB 2.2µH,Peaking

[6] CRYSTALS / VIBRATORS

X1 RCRSP0020AWZZ AG Crystal,16.93 MHz XL701 RCRSPA010AWZZ AE Crystal,32.768 KHz XL702 RCRM-A002AWZZ AD Resonator,9.83 MHz

[7] CAPACITORS

C1 VCKYCY1CB104K AB 0.1 µF,16V

C2 VCEAZA1AW107M AB 100 µF,10V,Electrolytic

C3 VCKYCY1CB104K AB 0.1 µF,16V

C4 VCEAZA1AW107M AB 100 µF,10V,Electrolytic

C5 VCKYCY1CB104K AB 0.1 µF,16V

C6 VCKYCY1CB104K AB 0.1 µF,16V

C7 VCCCCY1HH470J AA 47pF(CH),50V

C8 VCKYCY1HB153K AA 0.015 µF,50V

C10 VCKYCY1CB104K AB 0.1 µF,16V C11 VCKYCY1HB103K AA 0.01 µF,50V C12 VCKYCY1HB103K AA 0.01 µF,50V C13 VCKYCY1HB472K AA 0.0047 µF,50V C14 VCKYCY1CB104K AB 0.1 µF,16V C15 VCEAZA1AW107M AB 100 µF,10V,Electrolytic C16 VCKYCY1CB104K AB 0.1 µF,16V C17 VCKYCY1HB103K AA 0.01 µF,50V C18 VCKYCY1CB104K AB 0.1 µF,16V C19 VCCCCY1HH680J AA 68pF(CH),50V C20 VCKYCY1HB153K AA 0.015 µF,50V C21 VCKYCY1CB104K AB 0.1 µF,16V C22 VCEAZA1AW107M AB 100 µF,10V,Electrolytic C23 VCKYCY1CB104K AB 0.1 µF,16V C25 VCKYCY1HB333K AB 0.033 µF,50V C26 VCKYCY1HB333K AB 0.033 µF,50V C27 VCKYCY1CB104K AB 0.1 µF,16V C28 VCCCCY1HH471J AA 470pF(CH),50V C29 VCKYCY1CB104K AB 0.1 µF,16V C30 VCCCCY1HH471J AA 470pF(CH),50V C31 VCKYCY1HB473K AB 0.047 µF,50V C32 VCKYCY1HB473K AB 0.047 µF,50V C33 VCKYCY1CB104K AB 0.1 µF,16V C34 VCCCCY1HH222J AA 2200pF(CH),50V C35 VCKYCY1CB104K AB 0.1 µF,16V C36 VCKYCY1CB104K AB 0.1 µF,16V C37 VCCCCY1HH150J AA 15pF(CH),50V C38 VCCCCY1HH150J AA 15pF(CH),50V C39 VCKYCY1CB104K AB 0.1 µF,16V C40 VCEAZA1AW107M AB 100 µF,10V,Electrolytic C41 VCKYCY1CB104K AB 0.1 µF,16V C42 VCEAZA1CW226M AC 22 µF,16V,Electrolytic C43 VCKYCY1CB104K AB 0.1 µF,16V C44 VCKYCY1CB104K AB 0.1 µF,16V C45 VCKYCY1HB103K AA 0.01 µF,50V C46 VCKYCY1CB104K AB 0.1 µF,16V C48 VCCCCY1HH101J AA 100pF(CH),50V C49 VCCCCY1HH101J AA 100pF(CH),50V C50 VCCCCY1HH101J AA 100pF(CH),50V C51 VCCCCY1HH101J AA 100pF(CH),50V C52 VCCCCY1HH101J AA 100pF(CH),50V C53 VCCCCY1HH101J AA 100pF(CH),50V

[3] DIODES

Page 61

XL-DK225

NO. PARTS CODE

PRICE

RANK

NEW

MARK

PAR T

RANK

DESCRIPTION

C54 VCKYCY1CB104K AB 0.1 µF,16V C55 VCKYCY1CB104K AB 0.1 µF,16V C56 VCKYCY1CB104K AB 0.1 µF,16V C57 VCEAZA1AW107M AB 100 µF,10V,Electrolytic C58 VCKYCY1CB104K AB 0.1 µF,16V C59 VCKYCY1CB104K AB 0.1 µF,16V C60 VCEAZA1AW107M AB 100 µF,10V,Electrolytic C61 VCKYCY1CB104K AB 0.1 µF,16V C62 VCKYCY1CB104K AB 0.1 µF,16V C63 VCEAZA0JW108M AC 1000 µF,6.3V,Electrolytic C64 VCKYCY1CB104K AB 0.1 µF,16V C65 VCEAZA1AW107M AB 100 µF,10V,Electrolytic C66 VCKYCY1CB104K AB 0.1 µF,16V C67 VCEAZA1AW227M AC 220 µF,10V,Electrolytic C69 VCEAZA1AW227M AC 220 µF,10V,Electrolytic C71 VCCCCY1HH101J AA 100pF(CH),50V C72 VCCCCY1HH101J AA 100pF(CH),50V C75 VCEAZA1HW106M AB 10 µF,50V,Electrolytic

C76 VCEAZA1HW106M AB 10 µF,50V,Electrolytic C100 VCCCCY1HH101J AA 100pF(CH),50V C101 VCKYCY1HB104K AB 0.1 µF,50V C104 VCKYCY1HB104K AB 0.1 µF,50V C105 VCKYCY1HB104K AB 0.1 µF,50V C108 RC-EZD226AF1C AB 22 µF,16V,Electrolytic C110 VCKYCY1HB102K AA 0.001 µF,50V C111 VCCCCY1HH101J AA 100pF(CH),50V C112 VCKYCY1HB102K AA 0.001 µF,50V C601 VCEAZA1CW227M AC 220 µF,16V,Electrolytic C602 VCKYCY1EF223Z AB 0.022 µF,25V C603 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C605 VCFYFA1HA683J AB 0.068 µF,50V,Thin Film C606 VCFYFA1HA683J AB 0.068 µF,50V,Thin Film C607 VCQYKA1HM332K AA 0.0033 µF,50V,Mylar C608 VCQYKA1HM332K AA 0.0033 µF,50V,Mylar C611 VCFYFA1HA124J AB 0.12 µF,50V,Thin Film C612 VCFYFA1HA124J AB 0.12 µF,50V,Thin Film C613 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C614 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C617 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C618 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C621 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C622 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C623 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C624 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C637 VCKYCY1HB102K AA 0.001 µF,50V C638 VCKYCY1HB102K AA 0.001 µF,50V C640 VCEAZA1HW226M AB 22 µF,50V,Electrolytic C641 VCKYCY1HB102K AA 0.001 µF,50V C642 VCKYCY1HB102K AA 0.001 µF,50V C646 VCKYCY1HB102K AA 0.001 µF,50V C647 VCKYCY1HB102K AA 0.001 µF,50V C648 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C649 VCCCCY1HH101J AA 100pF(CH),50V C650 VCCCCY1HH101J AA 100pF(CH),50V C652 VCKYCY1HB221K AA 220 pF,50V C653 VCKYCY1HB221K AA 220 pF,50V C677 VCEAZA1EW476M AB 47 µF,25V,Electrolytic C678 VCKYCY1HB103K AA 0.01 µF,50V C683 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C684 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C690 VCKYCY1HB391K AA 390pF,50V C691 VCKYCY1HB391K AA 390 pF,50V C693 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C694 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C701 VCCCCY1HH150J AA 15pF(CH),50V C702 VCCCCY1HH180J AA 18pF(CH),50V C703 VCEAZU0JW108M AC 1000 µF,6.3V,Electrolytic C704 VCCCCY1HH101J AA 100pF(CH),50V C705 VCKYCY1HB103K AA 0.01 µF,50V C706 RC-EZD475AF1H AB 4.7 µF,50V,Electrolytic C707 VCKYCY1HB103K AA 0.01 µF,50V C708 VCKYCY1EF104Z AA 0.1 µF,25V C709 RC-EZD106AF1C AB 10 µF,16V,Electrolytic C715 VCKYCY1CF105Z AB 1 µF,16V C716 VCKYCY1CF105Z AB 1 µF,16V C717 VCCCCY1HH151J AA 150pF(CH),50V C718 VCKYCY1EF223Z AB 0.022 µF,25V C719 RC-EZD476AF1C AC 47 µF,16V,Electrolytic C720 VCKYCY1HB102K AA 0.001 µF,50V C721 VCKYCY1HB102K AA 0.001 µF,50V C725 VCCCCY1HH271J AA 270pF(CH),50V C726 VCEAZA1HW474M AB 0.47 µF,50V,Electrolytic C727 VCCCCY1HH820J AA 82pF(CH),50V C728 VCEAZA1HW226M AC 22 µF,50V,Electrolytic C729 VCKYCY1EF104Z AA 0.1 µF,25V C730 VCKYCY1HB103K AA 0.01 µF,50V C731 VCCCCY1HH271J AA 270pF(CH),50V C732 VCCCCY1HH271J AA 270pF(CH),50V

[7] CAPACITORS

Page 62

XL-DK225

NO. PARTS CODE

PRICE RANK

NEW

MARK

PAR T RANK

DESCRIPTION

C733 VCCCCY1HH271J AA 270pF(CH),50V C734 VCEAZA1HW106M AC 10 µF,50V,Electrolytic C735 VCKYCY1EF104Z AA 0.1 µF,25V C736 RC-EZD105AF1H AB 1 µF,50V,Electrolytic C737 VCEAZA1HW105M AB 1 µF,50V,Electrolytic C738 VCKYCY1EF104Z AA 0.1 µF,25V C739 VCKYCY1HB222K AA 0.0022 µF,50V C740 VCKYCY1HB222K AA 0.0022 µF,50V C742 VCKYCY1HB222K AA 0.0022 µF,50V C743 RC-EZD107AF1A AB 100 µF,10V,Electrolytic C754 VCCCCY1HH101J AA 100pF(CH),50V C755 VCCCCY1HH101J AA 100pF(CH),50V C756 VCCCCY1HH101J AA 100pF(CH),50V C757 VCCCCY1HH101J AA 100pF(CH),50V C758 VCEAZA1HW106M AC 10 µF,50V,Electrolytic C801 VCEAZA1VW107M AC 100 µF,35V,Electrolytic C802 VCEAZA1HW476M AB 47 µF,50V,Electrolytic C803 VCEAZA1HW476M AB 47 µF,50V,Electrolytic C804 VCEAZA1JW227M AD 220 µF,63V,Electrolytic C805 VCEAZA2AW226M AC 22 µF,100V,Electrolytic C806 VCFYFA1HA104J AC 0.1 µF,50V,Thin Film C807 VCFYFA1HA104J AC 0.1 µF,50V,Thin Film C808 VCFYFA1HA224J AC 0.22 µF,50V,Thin Film C809 VCFYFA1HA224J AC 0.22 µF,50V,Thin Film C817 VCFYFA1HA104J AC 0.1 µF,50V,Thin Film C818 VCFYFA1HA104J AC 0.1 µF,50V,Thin Film C819 VCEAZA1EW108M AE 1000 µF,25V,Electrolytic C841 VCEAZA0JW108M AC 1000 µF,6.3V,Electrolytic C842 VCEAZA1EW477M AD 470 µF,25V,Electrolytic C843 VCQYKA1HM473K AB 0.1 µF,50V,Mylar

C844 RC-KZ002LAWZZ AC 4700 pF, 250V C854 VCEAZA1CW107M AC 100 µF,16V,Electrolytic C855 VCEAZA1HW106M AB 10 µF,50V,Electrolytic C856 VCEAZW1EW688M AL 6800µF, 25V C859 VCEAZA1EW226M AB 22 µF,25V,Electrolytic C860 VCEAZA1EW476M AB 47 µF,25V,Electrolytic C861 VCQYKA1HM223K AB 0.022 µF,50V,Mylar C864 VCEAZA1EW226M AB 22 µF,25V,Electrolytic C865 VCEAZA1EW226M AB 22 µF,25V,Electrolytic C866 VCEAZA1EW476M AB 47 µF,25V,Electrolytic C868 VCKYCY1CF105Z AB 1 µF,16V C869 VCKYCY1CF105Z AB 1 µF,16V C870 VCEAZA1HW106M AB 10 µF,50V,Electrolytic C874 VCFYFA1HA104J AC 0.1 µF,50V,Thin Film C875 VCFYFA1HA104J AC 0.1 µF,50V,Thin Film C876 VCFYFA1HA104J AC 0.1 µF,50V,Thin Film C877 VCEAZA1EW476M AB 47 µF,25V,Electrolytic C878 VCKYCY1HB104K AB 0.1 µF,50V C879 VCKYCY1HB104K AB 0.1 µF,50V C901 VCEAZA1HW224M AB 0.22 µF,50V,Electrolytic C902 VCEAZA1HW224M AB 0.22 µF,50V,Electrolytic C903 VCKYCY1HB102K AA 0.001 µF,50V C904 VCKYCY1HB102K AA 0.001 µF,50V C905 VCCCCY1HH3R0C AA 3pF(CH),50V C906 VCCCCY1HH3R0C AA 3pF(CH),50V C907 VCKYCY1HB471K AA 470pF,50V C908 VCKYCY1HB471K AA 470pF,50V C909 VCEAZA1EW476M AB 47 µF,25V,Electrolytic C910 VCEAZA1EW476M AB 47 µF,25V,Electrolytic C911 VCKYCY1EF223Z AB 0.022 µF,25V C912 VCKYCY1EF223Z AB 0.022 µF,25V C913 VCEAZA1JW107M AC 100 µF,63V,Electrolytic C914 VCEAZA1JW107M AC 100 µF,63V,Electrolytic C915 VCEAZA1JW106M AB 10 µF,63V,Electrolytic C916 VCEAZA1JW106M AB 10 µF,63V,Electrolytic C921 VCEAZW1VW228M AH 2200 µF,50V,Electrolytic C922 VCEAZW1VW228M AH 2200 µF,50V,Electrolytic C925 VCEAZA1HW476M AB 47 µF,50V,Electrolytic C928 VCFYFA1HA104J AC 0.1 µF,50V,Thin Film C929 VCFYFA1HA104J AC 0.1 µF,50V,Thin Film C930 VCEAZA1HW476M AB 47 µF,50V,Electrolytic C931 VCEAZA1HW106M AB 10 µF,50V,Electrolytic C946 VCEAZA1HW104M AB 0.1 µF,50V,Electrolytic C960 VCEAZA1HW335M AB 3.3 µF,50V,Electrolytic

CA3 VCCCCY1HH101J AA 100pF(CH),50V

[8] RESISTORS

FB704 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green

J709 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green

JP3 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green

JP4 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green JP101 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green JP102 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green JP104 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green JP702 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green JP703 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green JP706 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green JP901 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green

[7] CAPACITORS

Page 63

XL-DK225

NO. PARTS CODE

PRICE

RANK

NEW

MARK

PAR T

RANK

DESCRIPTION

JP902 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green JP903 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green JP904 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green

L101 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green

R1 VRS-CY1JB562J AA 5.6 kohms,1/16W R2 VRS-CY1JB154J AA 150 kohms,1/16W R3 VRS-CY1JB334J AA 330 kohms,1/16W R4 VRS-CY1JB153J AA 15 kohms,1/16W R5 VRS-CY1JB473J AA 47 kohms,1/16W R6 VRS-CY1JB100J AA 10 ohms,1/16W R7 VRS-CY1JB223J AA 22 kohms,1/16W R8 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green

R9 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green R10 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green R11 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green R14 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green R15 VRD-ST2CD103J AA 10 kohms,1/6W R16 VRS-CY1JB123J AA 12 kohms,1/16W R17 VRD-ST2CD123J AA 12 kohms,1/6W R18 VRD-ST2CD103J AA 10 kohms,1/6W R19 VRD-ST2CD392J AA 3.9 kohms,1/6W R20 VRS-CY1JB221J AA 220 ohms,1/16W R21 VRS-CY1JB101J AA 100 ohms,1/16W R22 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green R23 VRS-CY1JB105J AA 1 Mohms,1/16W R24 VRS-CY1JB102J AA 1 kohms,1/16W R25 VRS-CY1JB102J AA 1 kohms,1/16W R26 VRD-ST2CD103J AA 10 kohms,1/6W R27 VRD-ST2CD221J AA 220 ohms,1/6W R28 VRD-ST2CD221J AA 220 ohms,1/6W R29 VRD-ST2CD221J AA 220 ohms,1/6W R30 VRD-ST2CD221J AA 220 ohms,1/6W R31 VRD-ST2CD221J AA 220 ohms,1/6W R32 VRD-ST2CD221J AA 220 ohms,1/6W R33 VRD-ST2CD221J AA 220 ohms,1/6W R34 VRS-CY1JB103J AA 10 kohms,1/16W R35 VRD-ST2CD101J AA 100 ohms,1/6W R36 VRD-ST2CD221J AA 220 ohms,1/6W R37 VRS-CY1JB103J AA 10 kohms,1/16W R38 VRS-CY1JB103J AA 10 kohms,1/16W R39 VRS-CY1JB101J AA 100 ohms,1/16W R40 VRS-CY1JB102J AA 1 kohms,1/16W R41 VRD-ST2CD102J AA 1 kohms,1/6W R42 VRD-ST2CD102J AA 1 kohms,1/6W R43 VRD-ST2CD102J AA 1 kohms,1/6W R44 VRD-ST2CD102J AA 1 kohms,1/6W R45 VRS-CY1JB472J AA 4.7 kohms,1/16W R46 VRS-CY1JB472J AA 4.7 kohms,1/16W R47 VRS-CY1JB562J AA 5.6 kohms,1/16W R48 VRS-CY1JB682J AA 6.8 kohms,1/16W R49 VRS-CY1JB102J AA 1 kohms,1/16W R50 VRS-CY1JB103J AA 10 kohms,1/16W R51 VRS-CY1JB682J AA 6.8 kohms,1/16W R52 VRD-ST2CD271J AA 270 ohms,1/6W R53 VRS-CY1JB471J AA 470 ohms,1/16W R54 VRS-CY1JB102J AA 1 kohms,1/16W R55 VRS-CY1JB103J AA 10 kohms,1/16W R56 VRS-CY1JB103J AA 10 kohms,1/16W R92 VRS-CY1JB102J AA 1 kohms,1/16W R93 VRS-CY1JB473J AA 47 kohms,1/16W R95 VRD-ST2CD103J AA 10 kohms,1/6W R96 VRD-ST2CD103J AA 10 kohms,1/6W

R107 VRS-CY1JB101J AA 100 ohms,1/16W R110 VRS-CY1JB274D AA 270 kohms,1/16W R113 VRS-CY1JB101J AA 100 ohms,1/16W R115 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green R116 VRS-CY1JB562D AA 5.6 kohms,1/16W R117 VRS-CY1JB274D AA 270 kohms,1/16W R118 VRS-CY1JB102J AA 1 kohms,1/16W R119 VRS-CY1JB102J AA 1 kohms,1/16W R120 VRS-CY1JB104J AA 100 kohms,1/16W R121 VRS-CY1JB104J AA 100 kohms,1/16W R122 VRS-CY1JB104D AA 100 kohms,1/16W R123 VRS-CY1JB104D AA 100 kohms,1/16W R128 VRS-CY1JB104D AA 100 kohms,1/16W R129 VRS-CY1JB104D AA 100 kohms,1/16W R131 VRS-CY1JB154D AA 150 kohms,1/16W R132 VRS-CY1JB154D AA 150 kohms,1/16W R133 VRS-CY1JB154D AA 150 kohms,1/16W R134 VRS-CY1JB154D AA 150 kohms,1/16W R602 VRD-ST2CD102J AA 1 kohms,1/6W R603 VRD-ST2CD102J AA 1 kohms,1/6W R606 VRD-ST2CD562J AA 5.6 kohms,1/6W R607 VRD-ST2CD562J AA 5.6 kohms,1/6W R608 VRS-CY1JB822J AA 8.2 kohms,1/16W R609 VRS-CY1JB822J AA 8.2 kohms,1/16W R614 VRS-CY1JB333J AA 33 kohms,1/16W R615 VRS-CY1JB333J AA 33 kohms,1/16W

[8] RESISTORS

Page 64

XL-DK225

NO. PARTS CODE

PRICE RANK

NEW

MARK

PAR T RANK

DESCRIPTION

R616 VRS-CY1JB222J AA 2.2 kohms,1/16W R617 VRD-ST2CD222J AA 2.2 kohms,1/6W R618 VRD-ST2CD682J AA 6.8 kohms,1/6W R619 VRD-ST2CD682J AA 6.8 kohms,1/6W R620 VRS-CY1JB223J AA 22 kohms,1/16W R623 VRS-CY1JB332J AA 3.3 kohms,1/16W R625 VRS-CY1JB332J AA 3.3 kohms,1/16W R626 VRS-CY1JB474J AA 470 kohms,1/16W R627 VRS-CY1JB104J AA 100 kohms,1/16W R641 VRD-ST2CD822J AA 8.2 kohms,1/6W R642 VRD-ST2CD822J AA 8.2 kohms,1/6W R643 VRS-CY1JB103J AA 10 kohms,1/16W R644 VRS-CY1JB103J AA 10 kohms,1/16W R645 VRS-CY1JB472J AA 4.7 kohms,1/16W R646 VRS-CY1JB472J AA 4.7 kohms,1/16W R648 VRS-CY1JB472J AA 4.7 kohms,1/16W R649 VRS-CY1JB472J AA 4.7 kohms,1/16W R651 VRD-ST2CD222J AA 2.2 kohms,1/6W R652 VRD-ST2CD222J AA 2.2 kohms,1/6W R653 VRS-CY1JB222J AA 2.2 kohms,1/16W R654 VRS-CY1JB222J AA 2.2 kohms,1/16W R657 VRS-CY1JB103J AA 10 kohms,1/16W R658 VRS-CY1JB103J AA 10 kohms,1/16W R661 VRS-CY1JB822J AA 8.2 kohms,1/16W R662 VRS-CY1JB822J AA 8.2 kohms,1/16W R663 VRS-CY1JB472J AA 4.7 kohms,1/16W R664 VRS-CY1JB472J AA 4.7 kohms,1/16W R690 VRS-CY1JB153J AA 15 kohms,1/16W R691 VRS-CY1JB153J AA 15 kohms,1/16W R692 VRS-CY1JB273J AA 27 kohms,1/16W R693 VRS-CY1JB273J AA 27 kohms,1/16W R703 VRD-ST2CD102J AA 1 kohms,1/6W R704 VRD-ST2CD102J AA 1 kohms,1/6W R707 VRS-CY1JB681J AA 680 ohms,1/16W R708 VRS-CY1JB102J AA 1 kohms,1/16W R709 VRS-CY1JB102J AA 1 kohms,1/16W R711 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green R712 VRS-CY1JB102J AA 1 kohms,1/16W R713 VRS-CY1JB221J AA 220 ohms,1/16W R717 VRS-CY1JB103J AA 10 kohms,1/16W R718 VRS-CY1JB102J AA 1 kohms,1/16W R719 VRD-ST2CD101J AA 100 ohms,1/6W R720 VRD-ST2CD102J AA 1 kohms,1/6W R722 VRS-CY1JB103J AA 10 kohms,1/16W R725 VRS-CY1JB223J AA 22 kohms,1/16W R728 VRS-CY1JB102J AA 1 kohms,1/16W R731 VRS-CY1JB221J AA 220 ohms,1/16W R732 VRD-ST2CD221J AA 220 ohms,1/6W R733 VRS-CY1JB221J AA 220 ohms,1/16W R734 VRD-ST2CD221J AA 220 ohms,1/6W R735 VRD-ST2CD102J AA 1 kohms,1/6W R736 VRD-ST2CD271J AA 270 ohms,1/6W R737 VRD-ST2CD102J AA 1 kohms,1/6W R738 VRD-ST2CD272J AA 2.7 kohms,1/6W R739 VRS-CY1JB103J AA 10 kohms,1/16W R741 VRD-ST2CD102J AA 1 kohms,1/6W R746 VRD-ST2CD473J AA 47 kohms,1/6W R751 VRD-ST2CD102J AA 1 kohms,1/6W R752 VRS-CY1JB102J AA 1 kohms,1/16W R753 VRS-CY1JB102J AA 1 kohms,1/16W R754 VRS-CY1JB102J AA 1 kohms,1/16W R755 VRS-CY1JB102J AA 1 kohms,1/16W R756 VRS-CY1JB102J AA 1 kohms,1/16W R757 VRS-CY1JB102J AA 1 kohms,1/16W R758 VRS-CY1JB102J AA 1 kohms,1/16W R759 VRS-CY1JB102J AA 1 kohms,1/16W R760 VRS-CY1JB102J AA 1 kohms,1/16W R761 VRS-CY1JB102J AA 1 kohms,1/16W R762 VRS-CY1JB332J AA 3.3 kohms,1/16W R763 VRD-ST2EE181J AA 180 ohms,1/4W R764 VRS-CY1JB103J AA 10 kohms,1/16W R767 VRD-ST2CD102J AA 1 kohms,1/6W R770 VRD-ST2CD102J AA 1 kohms,1/6W R771 VRD-ST2CD102J AA 1 kohms,1/6W R772 VRD-ST2CD102J AA 1 kohms,1/6W R773 VRS-CY1JB102J AA 1 kohms,1/16W R774 VRS-CY1JB102J AA 1 kohms,1/16W R775 VRS-CY1JB102J AA 1 kohms,1/16W R776 VRS-CY1JB102J AA 1 kohms,1/16W R777 VRS-CY1JB102J AA 1 kohms,1/16W R778 VRS-CY1JB102J AA 1 kohms,1/16W R779 VRS-CY1JB102J AA 1 kohms,1/16W R780 VRS-CY1JB102J AA 1 kohms,1/16W R782 VRD-ST2CD102J AA 1 kohms,1/6W R783 VRD-ST2CD102J AA 1 kohms,1/6W R784 VRD-ST2CD102J AA 1 kohms,1/6W R785 VRS-CY1JB102J AA 1 kohms,1/16W R786 VRS-CY1JB102J AA 1 kohms,1/16W R787 VRS-CY1JB102J AA 1 kohms,1/16W

[8] RESISTORS

Page 65

XL-DK225

NO. PARTS CODE

PRICE

RANK

NEW

MARK

PAR T

RANK

DESCRIPTION

R788 VRS-CY1JB102J AA 1 kohms,1/16W R789 VRD-ST2CD102J AA 1 kohms,1/6W R790 VRD-ST2CD102J AA 1 kohms,1/6W R791 VRD-ST2CD102J AA 1 kohms,1/6W R792 VRS-CY1JB102J AA 1 kohms,1/16W R793 VRS-CY1JB102J AA 1 kohms,1/16W R794 VRS-CY1JB102J AA 1 kohms,1/16W R795 VRD-ST2CD102J AA 1 kohms,1/6W R798 VRS-CY1JB103J AA 10 kohms,1/16W R799 VRD-ST2CD102J AA 1 kohms,1/6W R801 VRD-ST2CD563J AA 56 kohms,1/6W R802 VRD-ST2CD333J AA 33 kohms,1/6W R803 VRD-ST2CD123J AA 12 kohms,1/6W R804 VRD-ST2EE470J AA 47 ohms,1/4W R805 VRD-ST2EE470J AA 47 ohms,1/4W R806 VRD-ST2CD473J AA 47 kohms,1/6W R807 VRD-ST2EE101J AA 100 ohms,1/4W R808 VRD-RT2HD222J AA 2.2 kohms,1/2W R841 VRD-ST2CD224J AA 220 kohms,1/6W R842 VRD-ST2CD102J AA 1 kohms,1/6W R843 VRD-ST2CD473J AA 47 kohms,1/6W R844 VRD-ST2EE820J AA 82 ohms,1/4W R853 VRS-CY1JB223J AA 22 kohms,1/16W R854 VRS-CY1JB332J AA 3.3 kohms,1/16W R858 VRD-ST2CD221J AA 220 ohms,1/6W R860 VRS-CY1JB103J AA 10 kohms,1/16W R863 VRD-RT2HD3R3J AA 3.3 ohms,1/2W R864 VRD-ST2CD223J AA 22 kohms,1/6W

R890 RR-HZA003AWZZ AD 4.7 ohms,1/2W R891 VRS-CY1JB331J AA 330 ohms,1/16W R892 VRD-ST2CD100J AA 10 ohms,1/6W R901 VRS-CY1JB563J AA 56 kohms,1/16W R902 VRS-CY1JB563J AA 56 kohms,1/16W R903 VRS-CY1JB102J AA 1 kohms,1/16W R904 VRS-CY1JB102J AA 1 kohms,1/16W R905 VRS-CY1JB821J AA 820 ohms,1/16W R906 VRS-CY1JB821J AA 820 ohms,1/16W R907 VRS-CY1JB563J AA 56 kohms,1/16W R908 VRS-CY1JB563J AA 56 kohms,1/16W R909 VRS-CY1JB102J AA 1 kohms,1/16W R910 VRS-CY1JB102J AA 1 kohms,1/16W R913 VRN-VV3AAR15J AB 0.15 ohms,1W R914 VRN-VV3AAR15J AB 0.15 ohms,1W R915 VRS-CY1JB392J AA 3.9 kohms,1/16W R916 VRS-CY1JB392J AA 3.9 kohms,1/16W R917 VRN-VV3DAR22J AC 0.22 ohms,2W R918 VRN-VV3DAR22J AC 0.22 ohms,2W R919 VRN-VV3DAR22J AC 0.22 ohms,2W R920 VRN-VV3DAR22J AC 0.22 ohms,2W

R921 VRG-ST2EC101J AB 100 ohms,1/4W,Fusible

R922 VRG-ST2EC101J AB 100 ohms,1/4W,Fusible R923 VRS-CY1JB182J AA 1.8 kohms,1/16W R924 VRS-CY1JB182J AA 1.8 kohms,1/16W R925 VRD-ST2CD223J AA 22 kohms,1/6W R927 VRD-ST2EE223J AA 22 kohms,1/4W R928 VRD-ST2EE223J AA 22 kohms,1/4W R935 VRD-ST2CD563J AA 56 kohms,1/6W R936 VRD-ST2CD563J AA 56 kohms,1/6W R937 VRS-CY1JB563J AA 56 kohms,1/16W R940 VRD-ST2EE4R7J AA 4.7 ohms,1/4W R941 VRD-ST2EE4R7J AA 4.7 ohms,1/4W R942 VRD-RT2HD681J AA 680 ohms,1/2W R943 VRD-RT2HD681J AA 680 ohms,1/2W R946 VRS-CY1JB473J AA 47 kohms,1/16W R944 VRD-ST2CD152J AA 1.5 kohms,1/6W R945 VRD-ST2CD152J AA 1.5 kohms,1/6W R947 VRD-ST2CD153J AA 15 kohms,1/6W R949 VRS-CY1JB102J AA 1 kohms,1/16W R950 VRS-CY1JB683J AA 68 kohms,1/16W R956 VRD-ST2CD102J AA 1 kohms,1/6W R957 VRD-RT2HD681J AA 680 ohms,1/2W

R958 VRD-RT2HD681J AA 680 ohms,1/2W R961 VRS-CY1JB333J AA 33 kohms,1/16W R962 VRS-CY1JB102J AA 1 kohms,1/16W R965 VRD-RT2HD822J AA 8.2 kohms,1/2W R966 VRD-RT2HD822J AA 8.2 kohms,1/2W R968 VRD-RT2HD681J AA 680 ohms,1/2W R974 VRS-CY1JB102J AA 1 kohms,1/16W R977 VRD-ST2CD153J AA 15 kohms,1/6W

RA5 VRS-CY1JB470J AA 47 ohms,1/16W RA14 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green RA15 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green RA16 VRS-CY1JB000J AA 0 ohms,Jumper,0.8x1.55mm,Green RD01 VRS-CY1JB182J AA 1.8 kohms,1/16W RD02 VRD-ST2CD222J AA 2.2 kohms,1/6W RD03 VRD-ST2CD332J AA 3.3 kohms,1/6W RD04 VRS-CY1JB562J AA 5.6 kohms,1/16W RD05 VRS-CY1JB103J AA 10 kohms,1/16W

[8] RESISTORS

Page 66

XL-DK225

NO. PARTS CODE

PRICE RANK

NEW

MARK

PAR T RANK

DESCRIPTION

RD06 VRS-CY1JB182J AA 1.8 kohms,1/16W RD07 VRS-CY1JB222J AA 2.2 kohms,1/16W RD08 VRS-CY1JB182J AA 1.8 kohms,1/16W

RD09 VRD-ST2CD222J AA 2.2 kohms,1/6W RP745 VRS-CY1JB272J AA 2.7 kohms,1/16W RP746 VRS-CY1JB272J AA 2.7 kohms,1/16W RP747 VRD-ST2CD102J AA 1 kohms,1/6W RP748 VRD-ST2CD102J AA 1 kohms,1/6W RP749 VRD-ST2CD102J AA 1 kohms,1/6W RP750 VRD-ST2CD102J AA 1 kohms,1/6W RP752 VRD-ST2EE1R5J AA 1.5 ohms,1/4W RP753 VRD-ST2EE1R5J AA 1.5 ohms,1/4W RP755 VRS-CY1JB103J AA 10 kohms,1/16W RP757 VRS-CY1JB104J AA 100 kohms,1/16W RP758 VRS-CY1JB224J AA 220 kohms,1/16W RP761 VRD-ST2CD103J AA 10 kohms,1/6W RP762 VRS-CY1JB103J AA 10 kohms,1/16W RP763 VRS-CY1JB151J AA 150 ohms,1/16W RP767 VRD-ST2EE331J AA 330 ohms,1/4W RP768 VRD-ST2CD333J AA 33 kohms,1/6W RP770 VRS-CY1JB272J AA 2.7 kohms,1/16W RP771 VRS-CY1JB272J AA 2.7 kohms,1/16W RP772 VRD-ST2CD272J AA 2.7 kohms,1/6W RP773 VRD-ST2CD272J AA 2.7 kohms,1/6W RP774 VRS-CY1JB103J AA 10 kohms,1/16W RP776 VRS-CY1JB103J AA 10 kohms,1/16W RP777 VRD-ST2CD103J AA 10 kohms,1/6W RP778 VRD-ST2CD103J AA 10 kohms,1/6W RP779 VRS-CY1JB272J AA 2.7 kohms,1/16W

[9] OTHER CIRCUITRY PARTS

Bi101 QCNWNA849AWPZ AM Connector Ass'y,13 / 13 Pin

Bi601 QCNWNA587AWPZ AH Connector Ass'y,9 / 10 Pin

Bi701 QCNWNA056AWPZ AF Connector Ass'y,6 / 7 Pin

Bi702 QCNWN2715AWPZ AG Connector Ass'y,9 / 8 Pin with CNS702

Bi703 QCNWNA848AWPZ AC Flat Wire, 2 Pin

Bi801 QCNWNA847AWPZ AM Connector Ass'y,10 / 11 Pin

Bi902 QCNWNA551AWPZ AF Connector Ass'y,4 / 5 Pin

CNB1 QCNCWZO11AWZZ AC Socket,11 Pin

CNP1 QCNCWYP16AWZZ AD Socket,16 Pin

CNP2 QCNCM705FAFZZ AB Plug,6 Pin

CNP3 QCNCWZY12AWZZ AC Socket,12 Pin

CNP4 QCNCWZX11AWZZ AC Socket,11 Pin

CNP5 92LCONE9P53254 AD Plug,9 Pin

CNP6 QCNCWZY10AWZZ AC Socket,10 Pin

CNP101 QCNCWA046AW30 AQ Socket,30 Pin

CNP301 QCNCWZX09AWZZ AC Socket,9 Pin CNP701A QCNCWZX17AWZZ AD Socket,17 Pin CNP701B QCNCWZY17AWZZ AD Socket,17 Pin

CNP702 QCNCWZY10AWZZ AC Socket,10 Pin

CNP703 92LCONE2P53253 AB Plug,2 Pin

CNP705 QCNCWZY12AWZZ AC Socket,12 Pin

CNP708 QCNCW012EAWZZ AC Socket,12 Pin

CNP801 QCNCM035KAWZZ AC Plug, 10 Pin

CNP802 92LCONE6P53253 AC Plug,6 Pin

CNP805 QCNCM049BAWZZ AC Plug,2 Pin

CNP902 QCNCM035DAWZZ AC Socket,4 Pin

CNP971 92LCONE2P53253 AB Plug,2 Pin

CNPU1 92LCONE8P53254 AC Plug,8 Pin CNPU2 92LCONE8P53254 AC Plug,8 Pin CNPU3 QCNCWYG12AWZZ AD Plug,12 Pin CNPU4 QCNCWYH12AWZZ AD Plug,12 Pin CNPU5 92LCONECP53254 AD Plug,12 Pin CNS2A QCNWNA750AWPZ AG Connector Ass'y,6 Pin with CNS2B

CNS971 QCNWNA057AWPZ AC Connector Ass'y,2 Pin ( FAN WIRE )

F801 QFS-D322BSJNi AC Fuse,3.15A,125V

F802 QFS-D322BSJNi AC Fuse,3.15A,125V

F803 QFS-D202BSJNi AB Fuse,2A,125V

F804 QFS-D202BSJNi AB Fuse,2A,125V

F805 QFS-D162BSJNi AE Fuse,1.6A,125V FFC1 QCNWN2700AWPZ AE Flat Cable,16 Pin FFC4 QCNWN2701AWPZ AD Flat Cable,11Pin

FFC301 QCNWNA844AWPZ AC Flat Cable,9 Pin FFC701 QCNWNA753AWPZ AE Flat Cable,21 Pin FFC702 QCNWNA810AWPZ AD Flat Cable,10 Pin FFC705 QCNWNA758AWPZ AE Flat Cable,12 Pin

FH801 92LFSHOLD1652T AB Fuse Holder

FH802 92LFSHOLD1652T AB Fuse Holder

FH803 92LFSHOLD1652T AB Fuse Holder

FH804 92LFSHOLD1652T AB Fuse Holder

FH805 92LFSHOLD1652T AB Fuse Holder

FH806 92LFSHOLD1652T AB Fuse Holder

FH807 92LFSHOLD1652T AB Fuse Holder

FH808 92LFSHOLD1652T AB Fuse Holder

FH809 92LFSHOLD1652T AB Fuse Holder

FH810 92LFSHOLD1652T AB Fuse Holder

[8] RESISTORS

Page 67

XL-DK225

NO. PARTS CODE

PRICE

RANK

NEW

MARK

PAR T

RANK

DESCRIPTION

FL701 VVKNA12MM54-1 AU FL Display

FW901 QCNWNA277AWPZ AC Flat Wire, 5 Pin

JK690 QSOCJ0224AWZZ AC Socket, VIDEO / AUX IN JK691 QSOCJ0120AWZZ AD RCA Jack JK701 QJAKM0004AWZZ AK Headphone Jack JK953 QSOCJA010AWZZ AC Socket, Sub Woofer Pre Out

LG2 QLUGPA001AWZZ AC Lug Terminal LG3 QLUGPA001AWZZ AC Lug Terminal LG4 QLUGPA001AWZZ AC Lug Terminal LG5 QLUGPA001AWZZ AC Lug Terminal

LUG1 QCNWNA863AWPZ Lug Wire

RL841 RRLYDA002AWZZ AF Relay,Power

RL914 RRLYD0016AWZZ AH Relay

RX701 VHLK2013TH2E1 AG Remote Sensor

SO901 QTANA0423AWZZ AE Speaker Jack SW701 92LSWICHT1663T AC Switch,Key Type [ DISC 4 ] SW702 92LSWICHT1663T AC Switch,Key Type [ DISC 5 ] SW703 92LSWICHT1663T AC Switch,Key Type [ OPEN/CLOSE ] SW704 92LSWICHT1663T AC Switch,Key Type [ DISC 1 ] SW705 92LSWICHT1663T AC Switch,Key Type [ DISC 2 ] SW706 92LSWICHT1663T AC Switch,Key Type [ DISC 3 ] SW707 92LSWICHT1663T AC Switch,Key Type [ POWER ON/STAND-BY ] SW708 92LSWICHT1663T AC Switch,Key Type [ PLAY/REPEAT ] SW709 92LSWICHT1663T AC Switch,Key Type [ STOP ] SW710 92LSWICHT1663T AC Switch,Key Type [ VIDEO/AUX ] SW711 92LSWICHT1663T AC Switch,Key Type [ TUNER / XM ] SW712 92LSWICHT1663T AC Switch,Key Type [ CD ]

TP1 RTUNSA012AWZZ AZ Tuner Pack

VR701 QSW-ZA001AWZZ AE Volume ( Jog type )

WIRE_B QCNWN2593AWZZ AB Single Wire,White,80mm

WTM901 QCNCW019EAWZZ AB Socket, 5 Pin

[9] OTHER CIRCUITRY PARTS

Page 68

XL-DK225

-MEMO-

Page 69

XL-DK225

[10] CABINET PARTS / CD MECHANISM PARTS

2345

PWB-D

PWB-B1

CD CHANGER

MECHANISM UNIT

PWB-A3

Grease

Silicon

PWB-A2

PWB-B2

PWB-A1

PWB-C

PWB-A4

TUNER PACK

CD MECHANISM

WITH CUSHION

FAN POSITION.

CAUTION : RING SPRING ASSY.INTO

FAN RIB

RING GAP

FAN RIB

RING GAP

MOTOR.

AFTER FULLY INSERTED THE FAN TO

CAUTION : MUST VISUAL CHECK

MOTOR BRACKET.

GAP IS 4.9 mm BETWEEN FAN AND FAN

( FOR REFERENCE ONLY )

4.9mm

FAN BLADE

FAN MOTOR BRACKET.

609x2

613x2

209

216

613x2

608x2

602x4

608x3

607x6

219

218

FL701

201

602

IC901

IC851

IC852

604x2

606x2

202-1

202-2

202-3

202

216x2

608

214

613

605x2

612x4

215x6

215x4

213

223

613x2

603x2

614x3

224x2

608

201-2

201-3

203

226

227

210

201-1

201-5

201-6

201-4

201-7

608x2

206x5

217

229

302

303

208

613x2

608x3

613x2

205

609X2

225

220

PWB-B4

207

231

613x8

616x2

615x2

202-4

221 212

230

PWB-B3

303

304

301

611x2

222

Page 70

XL-DK225

NO. PARTS CODE

PRICE RANK

NEW

MARK

PAR T RANK

DESCRIPTION

NOTE: FOR CD MECHANISM PARTS, ITEM NO. ARE 3XX

[10] CABINET PARTS / CD MECHANISM PARTS

201 CCABA6896AW01 AX Front Panel Ass'y 201-1 ----------------------- - Front Panel 201-2 HDECQA392AWSA AM Panel, FL Display 201-3 HBDGB1001AWSA AD Badge, SHARP 201-4 JKNBZA182AWSA AE Button, Function, A 201-5 JKNBZA183AWSA AE Button, Disc No. 201-6 HDECQA242AWSA AD Indicator, Volume Knob 201-7 HDECQA241AWSA AH Decoration, Panel

202 ----------------------- - Fan Motor Ass'y 202-1 LANGK0434AWFW AF Bracket, Fan Motor 202-2 NFANP0001AWZZ AD Rotary, Fan 202-3 RMOTVA015AWZZ AH Motor, Air Cooling Fan (M971) 202-4 92LCSPR1431C AA Spring, Ring

203 92LCSPR1431C AA Spring, Ring

205 GCAB-A052AWSB AS Top Cabinet

206 GCOVAA137AWSA AD Disc Tray Cover

207 GiTARA457AWSA AL Rear Panel [For America]

207 GITARA461AWSA AL Rear Panel [For Canada]

208 GiTASA140AWSB AL Side Panel, Left

209 GiTASA141AWSB AL Side Panel, Right

210 JKNBKA021AWSA AM Knob, VOLUME

212 LBND-1011AWZZ AA Nylon Band

213 LBSHC0005AWZZ AD Bushing, AC Power Supply Cord

214 LCHSMA071AWFW AP Chassis, Main

215 92LFSHOLD1652T AB Holder, Fuse

216 PCUSG0022AWZZ AB Cushion, Leg

217 LCHSZA010AWZZ AN Chassis, Changer Unit

218 LHLDZ9024AWZZ AD Holder, FL Display

219 LHLDZA047AWZZ AC Holder, LED

220 LHLDZA122AWZZ AC Holder, LED

221 92LNBAND1318A AA Nylon Band, 80mm

222 PRDARA154AWFW AR Heat Sink, Main

223 QACCDA002AWZZ AN AC Power Supply Cord

224 QLUGPA001AWZZ AC Lug (LG2-5)

225 TSPC-A800AWZZ AD Label, Specification [For America]

225 TSPC-A801AWZZ AD Label, Specification [For Canada]

226 ----------------------- - Nut (Not Replacement Item )

227 ----------------------- - Washer (Not Replacement Item )

229 CDCMECA6663SRC BK Changer Mechanism Unit

230 LANGT0042AWFW AC Bracket, PWB Support

231 PSHEPA091AWZZ AB Sheet, PC

301 KMECZA004AWZZ AB CD Mechanism Unit

302 PCUSG0004AWSA AD Cushion

303 PCUSGA099AWSA AC Cushion

304 PCUSG0001AWSA AD Cushion

602 LX-EZ0005AWF7 AB Screw, Special

603 LX-JZ0010AFF7 AB Screw, M3 X10mm

604 LX-JZ0036AWF7 AC Screw, Special

605 LX-JZ0037AWF7 AC Screw, Special

606 XBBY720P04000 AA Screw, M2 X4mm

607 XEBY726P10000 AA Screw, M2.6 X10mm

608 XEBY730P10000 AA Screw, M3 X10mm

609 XEBY730P12000 AA Screw, M3 X12mm

610 LX-JZA019AWF7 AB Screw, Special

611 XHBY730P06000 AB Screw, M3 X6mm

612 XHBY740P06000 AB Screw, M4 X6mm

613 XJBY730P10000 AA Screw, M3 X10mm

614 XJBY830P08000 AB Screw, M3 X8mm

615 XJSY730P10000 AA Screw, M3 X10mm

616 XJBY730P06000 AA Screw, M3 X6mm

Page 71

XL-DK225

[11] SPEAKER BOX PARTS

23456

Page 72

XL-DK225

NO. PARTS CODE

PRICE RANK

NEW

MARK

PAR T RANK

DESCRIPTION

[11] SPEAKER BOX PARTS

901 GBOXSA166AW01 BP Wooden Box Ass'y

902 CWAKPA010AW05 AS Net Frame Ass'y

903 GITASA172AWSC BC Front Board

904 LHLDZ8002AWSB AF Catching Holder

905 PCUSGA020AWZZ AB Cushion, Leg

906 TSPC-A778AWZZ AC Label, Specification

907 HDECQA355AWSC AH Tweeter Ring

908 HDECQA354AWSC AK Woofer Ring

909 XEBY730P14000 AB Screw, M3 x 14mm

910 XEMY835P14000 AC Screw, M3.5 x 14mm

911 XMBY840P20000 AC Screw, M4 x 20mm

912 PCUSSA057AWZZ Cushion, Top/Bottom

913 PCUSSA058AWZZ Cushion, Side SP1,2 RSP-ZA257AWZZ AZ Woofer SP3,4 RSP-ZA256AWZZ AT Tweeter

[12] ACCESSORIES / PACKING PARTS

92LFANT1535A AF FM Antenna QANTL0010AWZZ AP AM Loop Antenna RRMCGA133AWSA AR Remote Control TINSEA191AWZZ AF Operation Manual [For America] TINSZA282AWZZ AD Quick Guide [For America] TINSKA029AWZZ Operation Manual [For Canada] UACRTA008AW01 AP Adaptor Accessories

[13] P.W.B. ASSEMBLY ( Not Replacement Item )

PWB-A 92LPWB6895MANS - Main A1 / Power A2 / Speaker A3 / Transit iPod A4 PWB-B 92LPWB6894DPLS - Display B1 / Headphone B2 / Reflash B3 / Volume LED B4 PWB-C 92LPWB6894PODS - iPod PWB-D 92LPWB6894CDUS - CD MP3

[14] OTHER SERVICE PARTS

UDSKA0004AFZZ AZ CD Optical Pickup Lens Cleaner Disc

Page 73

XL-DK225

[12] ACCESSORIES / PACKING PARTS

UNIT Front Speaker(L/R)

Bottom

: Not Replacement Item

Packing Add.,Unit,Top/Bottom

SPAKAA166AWZZ

Polyethylene Bag,Unit

SSAKH0094AWZZ

Polyethylene Bag,Speaker

SSAKHA087AWZZ

Packing,Add., Front Speaker,Top/Bottom

SPAKAA160AWZZ

Packing

Front of Packing Case

Case

SPAKCA470AWZZ

Polyethylene Bag,Accessories

SSAKAA011AWZZ

AM Loop Antenna

FM Antenna

Remote Control

Operation Manual Quick Guide

Label,POP

TLABZA538AWZZ

ORF

PACKING METHOD (FOR U.S.A. ONLY)

Label,POP

TLABZA556AWZZ

Adaptor Accessories

Page 74

XL-DK225

Page 75

XL-DK225

Sharp-Roxy Corporation Sungai Petani, Kedah, Malaysia

SHARP CORPORATION

Printed in Malaysia

A0702-1MX•RR•M

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.