LASER PRINTER : JX-8200
No. : CLE-063
MEASURE TO ALLEVIATE PROBLEMS OF ABNORMAL
NOISE DURING PAPER FEEDING OPERATIONS.
1.Model Name: JX-8200 (for all market destinations).
2.General: There have been problems of abnormal noise caused by scraping of the washer due to
revolutions of the washer and both ends of the PS brake SP (compression spring).
As a measure to alleviate this problem, the washer has been changed to a plastic
slider, which has slipping characteristics.
3.Description: Washer: XWHSD60-10130 → LX-WZ0117FCZZ
4.Action: From 1998 August production.
Specifications for the plastic slider
Outer diameter: φ 11.5 ±0.!
eter:
I
φ 6.4 ±0.!
T
Changed to a plastic slider.
Grease application operations are
not necessary.
Ref.
Model
No.
JX-8200 All
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
8 -19
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
XWHSD60-10130 LX-WZ0117FCZZ AB Washer '98/8 3 ∗
Price
rank
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
∗ The change described above has been carried out in only 2 locations.
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
SHARP CORPORATION Reprography Division
Green
C