SHARP CLE057 Technical Report

LASER PRINTER : JX-8200

Date

:

Jul. 27, 1998

No. : CLE-057

CHANGE IN THE SPECIFIC ATIONS OF THE DV PAD UNIT.

1.Model Name: JX-8200 (for all market destinations)

2.General: A change has been carried out in the DV pad unit. This action has been carried out as a

measure to prevent problems of peeling of the urethane foam in the DV pad unit.

3.Description: 1. Temporary action.

An expandable PE sheet has been wrapped entirely around the old parts.

2. Permanent action.

DV pad unit CPAKA5883FC31 → CPAKA5883FC32

An expandable PE sheet has been
wrapped entirely around the old parts.

Attached expandable PE sheet.
with Nitto No.500

Change carried out in the
urethane foam.
[Change carried out in
materials. t15 →t!$]

4.Action: 1. Temporary action: From machine No. 550 in the 1998 April production.

Attached expandable
PE sheet.
with Nitto No.500

Old

The expandable PE sheet
has been wrapped once.

New

2. Permanent action:From 1998 May production.

SHARP CORPORATION Reprography Division

1/2

Green

C

Ref.

Model

No.

JX-8200 All ---- CPAKA5883FC31 CPAKA5883FC32 AY DV pad unit '98/5 3

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of
related parts in use.

6. Others.

Price

rank

Parts name

Effec-

tive

time

Inter-

change-

ability

Note

2/2