SHARP CLE049 Technical Report
LASER PRINTER : JX-8200
Date
:
Jul. 3, 1998
1. CHANGE CARRIED OUT IN THE COLOR OF THE LOCK PAWL ARM R AND
REINFORCEMENT AND CHANGE IN COLOR CARRIED OUT IN THE LOCK PAWL ARM L.
2. DISCONTINUANCE OF THE MOLT CARRIED OUT AS A MEASURE TO REDUCE COSTS OF
THE TRANSPORT UNIT.
3. CHANGE CARRIED OUT IN THE TRANSFER BEARING.
No. : CLE-049
1. Change carried out in the color of the lock pawl arm R and reinforcement and
change in color carried out in the lock pawl arm L.
1.Model Name: JX-8200 (For machines bound for all destinations).
2.General: A change has been carried out in the lock pawl arm L as a measure to alleviate
problems of cracking. A change has also been carried out in the color of the lock pawl
arm R and L.
The color of the lock pawl arm R and L has been changed from purple to bluehaze.
3.Description: As described in the figure shown below, the addition of ribs and a base R has been
carried out.
Old
New
4.Action: Running change from 1998 January production.
2. Discontinuance of the molt carried out as a measure to reduce costs of the transport
unit.
1.Model Name: JX-8200 (For machines bound for all destinations).
2.General: The molt used in the transport unit has been discontinued. This action has been carried
out as a measure to reduce the costs of the transport unit.
3.Description: As described in the figure shown below, the shutter seal and the frame seal of the
transport frame L have been discontinued.
SHARP CORPORATION Reprography Division
1/2
Green
C
Transport frame L
Discontinued shutter seal
Discontinued frame seal
4.Action: From the 1st lot of 1998 February production.
3. Change carried out in the transfer bearing.
1.Model Name: JX-8200 (For machines bound for all destinations).
2.General: A change has been carried out in the transfer bearing of the transport frame unit. The
bearing has been changed from a ball bearing to a copper sintered spring bushing type.
3.Description:
4.Action: From the 1st lot of 1998 April production.
Ref.
Model
No.
1
JX-8200 All
2
3
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
9 -27
10 -43
10 -70 PSHEP0209GCZZ
10 -69
9 -92
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
MLNKP0001GCZ2 MLNKP0001GCY4 AH Lock pawl arm L
MLNKP0002GCZ1 MLNKP0002GCY1 AK Lock pawl arm R 1st lot 4
PSHEP0210GCZZ Frame seal
NBRGY0097GCZZ NBRGC0595FCZZ AF Transfer bearing
2/2
Parts code Parts code
---- ----
Effec-
Price
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Parts name
rank
Shutter seal
tive
time
Mid-
'98/1
1st lot
'98/2
1st lot
'98/4
Inter-
change-
ability
3
6
1
Note
Loading...