SHARP CLE048 Technical Report
LASER PRINTER : JX-8200
Date
:
Jul. 3, 1998
No. : CLE-048
MEASURE TO ALLEVIATE PROBLEMS OF DETACHMENT
OF THE FUSING DRAWER SPRING.
1.Model Name: JX-8200 (For machines bound for all destinations).
2.General: There was a possibility of the spring used in opening and closing the fusing drawer
connector lid becoming detached. As a measure to alleviate this problem, the addition
of a sheet has been carried out.
3.Description:
Fusing shaft spring
Fusing connector
bracket
Spring retainer sheet
•Aedach
shaded section.
•Cabe s
wipe the
attachment surface
with alcohol.
ld be carried out on the
exercised to
4.Action: Running change from 1998 February production.
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
Model
No.
JX-8200 All 10 ---- PSHEP4627FCZZ AD Drawer spring retainer sheet
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Price
rank
Parts name
Effec-
tive
time
Mid-
'98/2
Inter-
change-
ability
4
Note
2/2
Loading...