SHARP CLE047 Technical Report

COLOR LASER PRINTER : JX-8200

Date

May. 11, 1998

No. : CLE-047

[Service Information]

ESTABLISHMENT OF NEW JX-8200 SERVICE PARTS

1.Model Name: JX-8200

2.General: The parts described below have been established as service parts for the fusing unit

and the OPC unit in the models listed above.

3.Description: <Part name> <Part code> <Unit>

Halogen lamp 100: RLMPU0015GCZ1 Fusing unit Halogen lamp 120: RLMPU0013GCZ1 Fusing unit Halogen lamp 240: RLMPU0016GCZ1 Fusing unit Heat roller: NROLR0072GCZ2 Fusing unit Pressure roller: NROLR0073GCZ2 Fusing unit Thermostat: RDTCT0018GCZ1 Fusing unit Cleaning blade: UCLEZ0019GCZZ OPC unit

Ref.

Model

No.

name

JX-8200

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

100V Series 120V Series RLMPU0013GCZ1 Halogen lamp 200 240V Series RLMPU0016GCZ1 Halogen lamp 240

---- ----

All

Current parts New parts

Parts code Parts code

RLMPU0015GCZ1

NROLR0072GCZ2 BP Heat roller NROLR0073GCZ2 BF Pressure roller RDTCT0018GCZ1 AR Thermistor UCLEZ0019GCZZ AU Cleaning blade

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

rank

Halogen lamp 100

Parts name

Effec-

tive

time

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green