SHARP CLE042 Technical Report

COLOR LASER PRINTER : JX-8200

Date

May. 11, 1998

No. : CLE-042

MEASURE TO ALLEVIATE PROBLEMS OF LEADING EDGE

CUT-OFFS IN THE OHP IN THE COPY PAPER FEEDING UNIT.

1.Model Name: A3JX-8200 (for machines bound for all destinations)

2.General: There was a possibility of the leading edge of the copy images being cut off due to the

timing being out of synchronization, caused by the OHP not biting into the roller. The cause of this problem was ascertained to be the mylar sheet which was attached to the lower guide being too close to the PS upper roller, preventing the OHP from biting into the roller. As a measure to alleviate this problem, a change has been carried out in the change of the shape of the PS front sheet A, PS front sheet B, and the PS lower sheet.

3.Description: <1> PS front sheet A: PSHEP0291GCZ1

<2> PS front sheet B: PSHEP0292GCZ1 <3> PS lower sheet: PSHEP0236GCZ2

4.Action: <1>/<2> : From 1998 March production.

<3> : From 1998 February production.

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

Model

No.

JX-8200 All

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

8 -77 8 -78 8 -64

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

PSHEP0291GCZZ PSHEP0291GCZ1 AD PS front sheet A PSHEP0292GCZZ PSHEP0292GCZ1 AC PS front sheet B PSHEP0236GCZ1 PSHEP0236GCZ2 AF PS lower sheet ’98/2

Price

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

Effec-

tive

time

’98/3

Inter-

change-

ability

Note

2/2