SHARP CLE037 Technical Report
COLOR LASER PRINTER : JX-8200
Date
:
May. 11, 1998
No. : CLE-037
CHANGE CARRIED OUT IN THE SHAPE OF THE
OUTER CABINET.
1.Model Name: A3JX-8200 AL/AU/BA/BG/BK
2.General: A change has been carried out in the right cabinet and the left cabinet of the outer unit.
A change has also been carried out in the shape of the E. P. of the U-turn guide.
3.Description: Right cabinet:A change has been carried out in the shape as a reinforcement measure
to prevent damage such as cracks, etc. from occurring due to dropping
or vibrations. The shape has been changed to a ribbed shape.
Left cabinet: There was a gap between the left cabinet and the metal plate of the ICU
box. A change in the shape has been carried out by adding ribs as a
reinforcement measure.
U-turn guide: Improvement measures have been carried out to prevent copy paper
jams from occurring due to burrs in the section where E.P. operations
were carried out.
4.Action: From 1997 April production.
Ref.
Model
No.
JX-8200 All
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
1 -15
1 -17
8 -34
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
rank
AY
Parts name
Right cabinet
Parts code Parts code
GCABB0042GCZ2 GCABB0042GCZ3
GCABC0043GCZ2 GCABC0043GCZ3 Left cabinet
PGIDM0051GCZ1 PGIDM0051GCZ2 AQ U turn guide
Price
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Effec-
tive
change-
time
’97/4 3
Inter-
ability
Note
SHARP CORPORATION Reprography Division
Green
C
Loading...