SHARP CLE036 Technical Report

COLOR LASER PRINTER : JX-8200

Date

May. 11, 1998

No. : CLE-036

CHANGE CARRIED OUT IN THE FIXING

SCREWS OF THE OPTICAL UNIT.

1.Model Name: A3JX-8200 (for machines bound for all destinations)

2.General: There was a possibility of the heads of the fixing screws of the optical unit in the upper

frame unit becoming imbedded in the plastic portion when tightened. As a measure to alleviate this problem a change has been carried out in the fixing screws. The bind type fixing screws have been changed to cup tight type fixing screws.

3.Description: M3 × 8 S-tight bind type fixing screws → M3 × 8 S cup tight type fixing screws

XHBSD30P08000 → LX-BZ3008SC0S

Changed

LSU unit

4.Action: From 1997 mid-December production.

Ref.

Model

No.

JX-8200 All 12 -7 XHBSD30P08000 LX-BZ3008SC0S AA Screw

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

rank

Parts name

Effec-

tive

time

Mid-

’97/12

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green