SHARP CLE034 Technical Report

COLOR LASER PRINTER : JX-8200

Date

May. 11, 1998

No. : CLE-034

CHANGE CARRIED OUT IN THE STATIC

ELECTRICITY DISCHARGE LAMP PWB.

1.Model Name: A3JX-8200 (for machines bound for all destinations)

2.General: The static electricity discharge lamp cover was too short for the static electricity

discharge lamp PWB, causing warping to occur when the PWB was inserted. As a measure to alleviate this problem, a change has been carried out in the length of the PWB, making it shorter.

3.Description: Static electricity discharge lamp UN:

(Old) RLMPP0014GCZZ → (New) RLMPP0014GCZ1

Static electricity discharge lamp UN

4.Action: From 1998 January production.

Ref.

Model

No.

JX-8200 All 10 -24 RLMPP0014GCZZ RLMPP0014GCZ1 AU Discharge lamp ’98/1 1

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

Effec-

Price

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

tive

time

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green