SHARP CLE029 Technical Report

COLOR LASER PRINTER : JX-8200

Date

:

May. 11, 1998

No. : CLE-029

CHANGE CARRIED OUT IN THE DIAMETER OF

THE HOLES IN THE I/F PANEL.

1.Model Name: A3JX-8200 AU/AL/BA/BK/BC

2.General: The diameters of the screw holes in the I/F panel were too small, sometimes causing

problems during attachment operations when the ICU PWB unit was inserted in the
machine and fixed with screws. As a measure to alleviate this problem, the diameters of
the holes were increased.

3.Description: I/F Panel: the holes with a diameter of 3.2 were changed to holes with a diameter of 4.2.

4.Action: From 1997 December production.

Ref.

Model

No.

JX-8200 All

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

3 -24

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

HPNLC0019GCZZ HPNLC0019GCZ1 AL I/F panel ’97/12 3

Price

5. Interchangeable if replaced with same types of
related parts in use.

6. Others.

Parts name

rank

Effec-

tive

time

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green

C