SHARP CLE018 Technical Report
COLOR LASER PRINTER: JX-8200
Date
:
Mar. 23, 1998
No. : CLE-018
[Service Information]
1.CORRECTIONS CARRIED OUT IN THE PARTS GUIDE.
2.CHANGE CARRIED OUT IN PARTS.
1. Corrections carried out in the parts guide.
1.Model Name: JX-8200
2.General: There was an omission which was found in the parts guide. The omission has been
corrected, and the addition to the parts guide of the part described below has been
carried out.
3.Description: [Part name] [Part code]
Transfer cleaner spacer PSPAZ0048GCZZ
Mylar attachment location
(Drive side)
Blade
Cleaner case
Mylar attachment location
(Non-drive side)
Transfer drum
Cleaner case
Attachment carried out on
the transfer drum side.
2. Change carried out in parts.
1.Model Name: JX-8200
2.General: The changes and additions in parts has been carried out as described below. This
action has been carried out as a measure to improve productivity.
3.Description:
Part name
Pressure release spacer assembly CSPAZ0045GC01 CSPAZ0045GC02
Nip adjuster PAJS-0001GCZZ PAJS-0001GCZ1
Part code
Old New
SHARP CORPORATION Printer and Scanner Division
1/2
Orange
C
Ref.
Model
No.
1
JX-8200 All
2
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
---- ---- PSPAZ0048GCZZ AB Transfer cleaner spacer ’97/5 6
16 -102 CSPAZ0045GC01 CSPAZ0045GC02 AN
11 -20 PAJS-0001GCZZ PAJS-0001GCZ1 AH Nip adjuster ’97/8
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Price
rank
Parts name
Pressure release spacer
assembly
Effec-
tive
time
’97/7
Inter-
change-
ability
1
Note
2/2
Loading...