SHARP CLE013 Technical Report

COLOR LASER PRINTER: JX-8200

Date

Feb. 24, 1998

No. : CLE-013

ADDITION OF A SPRING CARRIED OUT IN THE

TRANSPORT FRAME OF THE MAIN FRAME R AND L.

1.Model Name: JX-8200 (for machines bound for all destinations)

2.General: <1> A change has been carried out in the shape and direction of the hook.

This action has been carried out as a measure to prevent the tension SP-AN of the main frame R from dropping off.

<2> A change has been carried out in the load when operating the machine.

This action has been carried out as a measure to stabilize the binding performance of the tension SP-B in the main frame R.

<3> The addition of a thrust SP-A has been carried out. This action has been

carried out as a measure to eliminate problems of thrust deviations in the transfer drum.

3.Action: <1> : From the 1st lot of 1997 August production.

<2> <3> : From the 1st lot of 1997 August production.

<2> Tension SP-B MSPRT0238GCZ1

Transfer drum unit

<1> Tension SP-AN MSPRT0295GCZ1

Transfer thrust SP-A <3>

Transfer drum bearing LN

SHARP CORPORATION Printer and Scanner Division

1/2

Orange

Ref.

Model

No.

JX-8200 All

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

4 -58 MSPRT0295GCZZ MSPRT0295GCZ1 4 -67 MSPRT0238GCZZ MSPRT0238GCZ1 Tension SP-B

9 ---- MSPRC0299GCZZ Transfer thrust SP-A 6

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price rank

Parts name

Tension SP-AN

Effec-

tive

time

’97/8

Inter-

change-

ability

Note

Newly added

2/2